Attribute Values: Other

Accuform, SHMABR619XL, 10" x 14" OSHA Caution Safety Sign "Stand Clear Of Door" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMACC806XV, 10" x 7" OSHA Notice Safety Sign "No Firearms Allowed On This Property" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMADC801XL, 10" x 14" OSHA Notice Safety Sign "Authorized Personnel Only" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMADC806XL, 10" x 14" OSHA Notice Safety Sign "No Admittance" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMADC806XT, 10" x 14" OSHA Notice Safety Sign "No Admittance" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMADC814XL10, 14" x 20" OSHA Notice Safety Sign "All Visitors Must Register At Office" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM014VP, 10" x 14" OSHA Danger Safety Sign "Construction Area: Keep Out" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMADM024VA, 7" x 10" OSHA Danger Safety Sign "Keep Out: Authorized Personnel Only" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMADM076VA10, 10" x 14" OSHA Danger Safety Sign "No Trespassing" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM076VP, 10" x 14" OSHA Danger Safety Sign "No Trespassing" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMADM116VP, 18" x 24" OSHA Danger Safety Sign "Do Not Enter" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMADM137VP, 14" x 20" OSHA Danger Safety Sign "Restricted Area" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMADM138VA10, 7" x 10" OSHA Danger Safety Sign "Do Not Enter" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM138XL, 7" x 10" OSHA Danger Safety Sign "Do Not Enter" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMADM138XV, 7" x 10" OSHA Danger Safety Sign "Do Not Enter" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMADM139VS10, 10" x 14" OSHA Danger Safety Sign "Do Not Enter" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM144VP10, 14" x 20" OSHA Danger Safety Sign "Keep Away" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM157XV, 10" x 14" OSHA Danger Safety Sign "Do Not Enter Authorized Personnel Only" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMADM292VA, 7" x 10" OSHA Danger Safety Sign "No Trespassing" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMADM292XP10, 7" x 10" OSHA Danger Safety Sign "No Trespassing" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM323XV, 10" x 14" OSHA Warning Safety Sign "Authorized Personnel Only" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMADM401VS10, 7" x 10" OSHA Notice Safety Sign "Not An Exit" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM634VS10, 14" x 20" OSHA Caution Safety Sign "Hazardous Area Authorized Personnel Only" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM710XP, 14" x 20" OSHA Notice Safety Sign "Not An Exit" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul>

Accuform, SHMADM837XL, 10" x 14" OSHA Notice Safety Sign "Maintenance Personnel Only" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMADM837XL10, 10" x 14" OSHA Notice Safety Sign "Maintenance Personnel Only" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMADM891VP, 7" x 10" OSHA Notice Safety Sign "This Door To Remain Unlocked During Business Hours" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMADM895XV, 10" x 14" OSHA Notice Safety Sign "This Door To Remain Unlocked During Business Hours" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMASE803XL10, 10" x 14" OSHA Notice Safety Sign "This Property Is Protected By Electronic Surveillance" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMASE807XT, 10" x 14" OSHA Notice Safety Sign "This Area Is Under 24 Hour Video Surveillance" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMASE814XL, 14" x 20" OSHA Notice Safety Sign "This Property Is Protected By Electronic Surveillance" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMASE816VP, 7" x 10" OSHA Notice Safety Sign "Video Surveillance In Use On These Premises" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMASE816VS, 7" x 10" OSHA Notice Safety Sign "Video Surveillance In Use On These Premises" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMATR112VA, 14" x 20" OSHA Danger Safety Sign "No Trespassing" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMATR962XT, 7" x 10" Private Property Safety Sign "No Trespassing" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMCAW135VA, 14" x 20" OSHA Danger Safety Sign "Non-Potable Water: Do Not Drink" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMCHG101XP10, 7" x 10" OSHA Danger Safety Sign "Flammable Liquids" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCHL010XL, 10" x 14" OSHA Danger Safety Sign "Caustic" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMCHL080VA, 14" x 20" OSHA Danger Safety Sign "Flammable Liquids" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMCHL091VP, 7" x 10" OSHA Danger Safety Sign "Hazardous Chemicals" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMCHL091XP, 7" x 10" OSHA Danger Safety Sign "Hazardous Chemicals" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul>

Accuform, SHMCHL155XP10, 14" x 20" OSHA Danger Safety Sign "Chemical Storage" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCHL178VP, 10" x 14" OSHA Danger Safety Sign "Hydrogen" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMCHL178XL10, 10" x 14" OSHA Danger Safety Sign "Hydrogen" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCHL178XV10, 10" x 14" OSHA Danger Safety Sign "Hydrogen" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCHL196XL, 7" x 10" OSHA Danger Safety Sign "Acetylene" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMCHL198XL, 10" x 14" OSHA Danger Safety Sign "Combustible Liquids" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMCHL212XL, 14" x 20" OSHA Danger Safety Sign "Gasoline" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMCHL212XP, 14" x 20" OSHA Danger Safety Sign "Gasoline" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul>

Accuform, SHMCHL241VS10, 7" x 10" OSHA Danger Safety Sign "Gasoline" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCHL269XV, 7" x 10" OSHA Danger Safety Sign "Hazardous Material" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMCHL563XP10, 7" x 10" Safety Sign "Spill-Kit Station" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCHL828VA10, 10" x 14" OSHA Notice Safety Sign "Do Not Dump Chemicals Down This Drain" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCPG104XT, 10" x 14" OSHA Danger Safety Sign "Compressed Gas" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMCPG609XP10, 14" x 20" OSHA Caution Safety Sign "Hot" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCPG611XT10, 7" x 10" OSHA Caution Safety Sign "Hot" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCPG800XV, 7" x 10" OSHA Notice Safety Sign "Keep All Cylinders Chained" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMCPG825VP, 10" x 14" OSHA Notice Safety Sign "Keep All Cylinders Chained" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMCRT011XT10, 14" x 20" OSHA Danger Safety Sign "Construction Area: Keep Out" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCRT106VA10, 14" x 20" OSHA Danger Safety Sign "Construction Area" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCRT127VP, 7" x 10" OSHA Danger Safety Sign "Construction Area" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMCRT135VS, 10" x 14" OSHA Danger Safety Sign "Construction Area" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMCRT147XP, 7" x 10" OSHA Danger Safety Sign "Fall Hazard" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul>

Accuform, SHMCSP002XV, 10" x 14" OSHA Danger Safety Sign "Confined Space" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMCSP012VP10, 7" x 10" OSHA Danger Safety Sign "Follow Confined Space Entry Procedure Before Entering" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCSP043VA10, 14" x 20" OSHA Danger Safety Sign "Confined Space Permit Required Do Not Enter" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMCSP056VS, 10" x 14" OSHA Danger Safety Sign "Follow Confined Space Entry Procedure Before Entering" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMCSP122VA, 7" x 10" OSHA Danger Safety Sign "Confined Space Permit Required Do Not Enter" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMCSP141XT, 10" x 14" OSHA Danger Safety Sign "Confined Space Authorized Personnel Only" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMECR306VP, 14" x 20" OSHA Warning Safety Sign "Low Headroom" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMELC022XL10, 10" x 14" OSHA Danger Safety Sign "Electrical Hazard: Authorized Personnel Only" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMELC040VP10, 10" x 14" OSHA Danger Safety Sign "High Voltage: Keep Away" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMELC050VS, 7" x 10" OSHA Danger Safety Sign "High Voltage: Unauthorized Personnel Keep Out" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMELC082XL, 14" x 20" OSHA Danger Safety Sign "High Voltage: Unauthorized Personnel Keep Out" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMELC111XL, 7" x 10" OSHA Danger Safety Sign "Buried Cable" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMELC111XV, 7" x 10" OSHA Danger Safety Sign "Buried Cable" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMELC308XV, 10" x 14" OSHA Warning Safety Sign "Electrical Panel Keep Clear Up To 36 Inches" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMELC309XT, 7" x 10" OSHA Warning Safety Sign "Electrical Panel Keep Clear Up To 36 Inches" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMELC328XL, 7" x 10" Warning Safety Sign "Electrical Hazard" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMELC636VA10, 7" x 10" OSHA Caution Safety Sign "Battery Charging Station No Smoking Or Open Flames" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMELC804XV, 10" x 14" OSHA Notice Electrical Safety Sign "Electrical Room No Storage Permitted" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMEQM060VP, 10" x 14" OSHA Danger Safety Sign "Moving Machinery" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMEQM155VS, 14" x 20" OSHA Danger Safety Sign "This Machine Starts and Stops Automatically" Adhesive Vinyl Features: <ul><li>Flexible 4-mil thick vinyl with acrylic adhesive </li> <li>Non-glare surface printed </li> <li>Moisture resistant </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMEQM193XV, 7" x 10" OSHA Danger Safety Sign "Do Not Operate: Men Working On Repairs" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMEQM710XL10, 7" x 10" OSHA Caution Safety Sign "Only Authorized Personnel Permitted To Operate This Machine" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMEXT401XT10, 7" x 10" Spanish Bilingual Safety Sign "Salida Para Incendios Mantenga La Puerta Cerrada" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMEXT406VP, 3" x 10" Safety Sign "Emergency Exit Only: Alarm Will Sound" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMEXT552XP, 10" x 14" Safety Sign "Emergency Exit: Keep Area Clear" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul>

Accuform, SHMEXT586XT, 7" x 10" Safety Sign White Text On Red "Emergency Exit Only" Dura-Plastic Features: <ul><li>Semi-rigid .060" thick polycarbonate with a protective coating </li> <li>Protected by UV protective coating </li> <li>Resists abrasion, humidity, and chemicals </li> <li>Service temperature range: -40° to 251°F </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMFEX524VP, 14" x 10" Severe Weather Safety Sign "Severe Weather Shelter Area- Emergency Shelter Sign" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul>

Accuform, SHMFEX800XL, 7" x 10" OSHA Notice Safety Sign "Tornado Shelter" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul>

Accuform, SHMFPR104VA, 7" x 10" OSHA Danger Fall Protection Sign "Fall Protection Required Beyond This Point" Aluminum Features: <ul><li>UV protective coating </li> <li>Withstands splashes and washdowns </li> <li>Endures outdoor environmental conditions </li> <li>Service temperature range: -40° to 250°F </li> <li>Provides the strength of metal, yet never rusts </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> </ul>

Accuform, SHMFPR105XP10, 10" x 14" OSHA Danger Fall Protection Sign "Fall Protection Required Beyond This Point" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMFS1617, 17" Slip-Gard Floor Sign Graphic and Arrow "Safety Shower" Features: <ul><li>Vinyl sign is overlaminated with a protective, non-slip, pebble-textured vinyl surface for added durability </li> <li>Printed and overlaminated to protect the graphics and message from heavy pedestrian traffic </li> <li>Strong, permanent acrylic adhesive back with peel-off liner </li> </ul>

Accuform, SHMFSD410VP10, 14" x 20" Safety Sign "First Aid Station" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMFSD609XP10, 14" x 10" Safety Poster "Adult CPR Cardiac Arrest" Accu-Shield Features: <ul><li>Two-ply, polycarbonate plastic with industrial-strength backing </li> <li>Resists fading, chemicals, corrosion, abrasions, cracking, and chipping </li> <li>Non-glare reverse and subsurface print encapsulated by permanently bonded embossed poly surface </li> <li>Rounded corners and 1/4" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature: polycarbonate at -60° to 260°F; backing -40° to 176°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMFSR527VP10, 7" x 10" Spanish Bilingual Safety Sign "Estacion Para Lavar Los Ojos" Plastic Features: <ul><li>Manufactured with 50% Post-Consumer Recycled plastic and is recyclable – code 2 </li> <li>.055" thick polyethylene, matte surface print </li> <li>Impact resistant with slight flexibility </li> <li>Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes </li> <li>Service temperature range: -90°F to 168° </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMFXG425XV, 7" x 10" Safety Sign Red Background "Fire Extinguisher Inside" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>

Accuform, SHMFXG558XL10, 14" x 10" Safety Sign with Arrow "Fire Extinguisher Do Not Block" Aluma-Lite Features: <ul><li>Resists impacts, flexing, vandalism, corrosion, chemicals, abrasions, and more </li> <li>Material is 40% lighter than solid aluminum, yet maintains the same durability and rigidity </li> <li>Printed surface has UV protective coating </li> <li>Service temperature range: -58° to 175°F </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Accuform, SHMGNF984XV, 7" x 10" OSHA Safety First Safety Sign "Report All Accidents No Matter How Small To Your Supervisor" Adhesive Dura-Vinyl Features: <ul><li>Flexible, 5-mil thick poly-composite with UV protective coating and rounded corners </li> <li>Resistant to abrasions, humidity, chemicals and solvents, and fading from sunlight </li> <li>Permanent, acrylic adhesive back with peel-off liner </li> <li>Adheres to: smooth, curved, and irregular surfaces </li> <li>Service temperature range: -40° to 176°F </li> </ul>