<p><strong>BlackBox, EVNSL0646A-1000, 1000' CAT6, 550-MHz Cable, 4-Pair, PVC, 24 AWG, Pink </strong> </p> <p>CAT6 stranded cable for high-performance short runs. </p> <p><strong>Features: </strong> </p> <ul><li>High-quality stranded CAT6 cable enables you to terminate your own patch cables. </li> <li>Stranded design makes it ideal for use in patching or for short runs. </li> <li>Designed for use with GigaTrue® products. </li> <li>Guaranteed for life! </li> <li>Meets ANSI/TIA-568-C.2 CAT6 and ISO/IEC 11801 Class E requirements. </li> <li>Use in 1000BASE-T, 100BASE-TX, 100BASE-VG, 155-Mbps ATM, 100-Mbps FDDI/CDDI, and other high-speed applications. </li> <li>Perfect for full broadband and baseband video. </li> <li>Delivers full Power Sum performance. </li> <li>Provides full-duplex operation for next-generation applications. </li> <li>Meets balance requirements (LCL/LCTL), resulting in better transmission. </li> <li>Also available in other colors. </li> </ul> <p><strong>This product works with: </strong> </p> <ul><li>GigaStation High-Density Multimedia Patch Panels (JPM191A, etc.) </li> <li>GigaTrue CAT6 Patch Panels (JPM610A-R6) </li> <li>GigaTrue CAT6 Jacks (FM630, etc.) </li> <li>GigaTrue2 CAT6 Jacks (FMT630-R2, etc.) </li> <li>CAT6 Modular Plugs (FMTP6-R2-25PAK, etc.) </li> <li>GigaStation Wallplates (WP482, etc.) </li> <li>GigaStation2 Wallplates (WPT482, etc.) </li> </ul>
<p><strong>BlackBox, EVNSL59-0007, GigaBase 350 CAT5e Patch Cable, Basic Connectors, Orange, 7-ft. (2.1-m) </strong> </p> <p>Get top CAT5e performance at a low price. </p> <p><strong>Features: </strong> </p> <ul><li>Tested to 350 MHz. </li> <li>Meet or exceed CAT5e T568B standards. </li> <li>Specially designed for use with other GigaBase® components. </li> <li>Improved near-end crosstalk (NEXT) compared to standard CAT5 cable. </li> <li>Guaranteed for life! </li> <li>Superior construction offers significant headroom. </li> <li>Stranded conductors for short runs. </li> <li>Tuned-plug design maintains a tighter twist and reduces noise. </li> <li>Enhanced performance parameters and electrical characteristics. </li> <li>Gold-plated contacts are designed for an insertion/extraction life of 1000 cycles. </li> <li>This cable has four pairs, 24 AWG construction, basic RJ-45 connectors, straight pinning, and a PVC jacket. </li> </ul> <p>NOTE: This cable works with all standard jacks, wallplates, and other RJ-45 hardware. </p> <p><strong>This product works with: </strong> </p> <ul><li>GigaStation High-Density Multimedia Patch Panels </li> <li>GigaBase CAT5e Patch Panels </li> <li>GigaBase CATe Jacks </li> <li>GigaBase2 CATe Jacks </li> <li>GigaStation Wallplates </li> <li>GigaStation2 Wallplates </li> </ul>
<p><strong>BlackBox, EVNSL628-0002, GigaTrue CAT6 Channel Patch Cable with Basic Connectors, Purple, 2-ft. (0.6-m) </strong> </p> <p>Get CAT6 performance in an end-to-end Black Box® GigaTrue® channel. </p> <p><strong>Features: </strong> </p> <ul><li>Get high-level CAT6 performance in an end-to-end BLACK BOX® GigaTrue® channel. </li> <li>Meets or exceeds CAT6 specifications. </li> <li>Tested to 550 MHz. </li> <li>Guaranteed for life! </li> <li>Cable construction: stranded, 24 AWG copper wire, RJ-45 connectors, 4-pair, T568B, PVC jacket, straight-pinned. </li> <li>Improved attenuation provides cleaner data and video transmissions. </li> <li>For 1000BASE-T, 100BASE-TX, 100BASE-VG, 155-Mbps ATM, 100-Mbps FDDI/CDDI, and other high-speed applications. </li> <li>Perfect for full broadband and baseband video. </li> <li>Stranded cable delivers full Power Sum performance. </li> <li>Provides full-duplex operation for next-generation applications. </li> <li>Meets balance requirements (LCL/LCTL), resulting in better transmission. </li> </ul> <p>NOTE: This product works with all standard jacks, wallplates, and other RJ-45 hardware. </p> <p><strong>This cable works with: </strong> </p> <ul><li>GigaStation High-Density Multimedia Patch Panels </li> <li>GigaTrue CAT6 Patch Panels </li> <li>GigaTrue CAT6 Jacks </li> <li>GigaTrue2 CAT6 Jacks </li> <li>GigaStation Wallplates </li> <li>GigaStation2 Wallplates </li> <li>GigaStation2 Surface-Mount Housings </li> <li>Snap Fittings </li> <li>GigaStation2 Snap Fittings </li> </ul>
<p><strong>BlackBox, EVNSL628-0100, GigaTrue CAT6 Channel Patch Cable with Basic Connectors, Purple, 100-ft. (30.4-m) </strong> </p> <p>Get CAT6 performance in an end-to-end Black Box® GigaTrue® channel. </p> <p><strong>Features: </strong> </p> <ul><li>Get high-level CAT6 performance in an end-to-end BLACK BOX® GigaTrue® channel. </li> <li>Meets or exceeds CAT6 specifications. </li> <li>Tested to 550 MHz. </li> <li>Guaranteed for life! </li> <li>Cable construction: stranded, 24 AWG copper wire, RJ-45 connectors, 4-pair, T568B, PVC jacket, straight-pinned. </li> <li>Improved attenuation provides cleaner data and video transmissions. </li> <li>For 1000BASE-T, 100BASE-TX, 100BASE-VG, 155-Mbps ATM, 100-Mbps FDDI/CDDI, and other high-speed applications. </li> <li>Perfect for full broadband and baseband video. </li> <li>Stranded cable delivers full Power Sum performance. </li> <li>Provides full-duplex operation for next-generation applications. </li> <li>Meets balance requirements (LCL/LCTL), resulting in better transmission. </li> </ul> <p>NOTE: This product works with all standard jacks, wallplates, and other RJ-45 hardware. </p> <p><strong>This cable works with: </strong> </p> <ul><li>GigaStation High-Density Multimedia Patch Panels </li> <li>GigaTrue CAT6 Patch Panels </li> <li>GigaTrue CAT6 Jacks </li> <li>GigaTrue2 CAT6 Jacks </li> <li>GigaStation Wallplates </li> <li>GigaStation2 Wallplates </li> <li>GigaStation2 Surface-Mount Housings </li> <li>Snap Fittings </li> <li>GigaStation2 Snap Fittings </li> </ul>
<p><strong>BlackBox, FOCMP50-005M-SCSC-OR, SC-SC, 50-Micron, Multimode Cable, Orange, 16.4-ft </strong> </p> <p><strong>Features: </strong> </p> <ul><li>Match Black Box fiber cable to your company, team, or school colors for that special networking application. </li> <li>Choose from four cores: 62.5-, 50-, 10-GbE laser-optimized 50-micron multimode, and 9-micron single-mode cable. </li> <li>Get the connectors you want: ST, SC, LC, and MT-RJ in 10 different combinations. </li> </ul>
<p><strong>Bradley, 2905-287300, 2905, Sensor Hand Dryer, Surface-Mounted 110-120Volt, 13.6amps, 60Hz </strong> </p> <p><strong>Product Materials: </strong> </p> <ul><li>COVER: 5 ⁄64" (1.9mm) thick steel one-piece cover with white epoxy coating. Cover fixed to the base with four Allen-head screws. </li> <li>MOTOR: durable, maintenance-free shaded pole motor with safety thermostat and self-resetting thermal cut-off at 266ºF (130ºC). PP UL94-V0 with single inlet fan wheel. </li> <li>HEATING ELEMENT: waved wire NiCr 40 heating element that incorporates a self-resetting thermal cut-off at 158ºF (70ºC). </li> <li>ELECTRONIC CONTROL: two distances (15/25 cm) IR electronic detection sensor with zamak air outlet grill. </li> <li>BASE PLATE: thermoplastic ABS UL 94-V0 base and single-inlet centrifugal scroll fan; with four diametr 5 ⁄16" (8mm) holes for wall mounting. </li> </ul> <p><strong>Installation: </strong> </p> <ul><li>Verify all Verify all rough-in dimensions prior to installation. Hand dryers require a dedicated circuit and must be properly grounded. GFI Circuit protection is recommended. One side of dryer should be mounted to a stud. </li> </ul> <p><strong>Operation: </strong> </p> <ul><li>Place hands 3"−6" below air outlet grill to activate air flow. Dryer will stop two seconds after hands are removed from air flow. </li> </ul> <p><strong>Guide: </strong> </p> <ul><li>Surface-mounted hand dryer shall be fabricated from one-piece 5 ⁄64" (1.9mm) thick steel. Cover shall have a white epoxy coating. Back base shall be fireresistant plastic ABS UL 94-V0. Dryer shall be fitted with an infrared electronic sensor, zamak air outlet grill and shaded pole motor with safety thermostat and self-resetting thermal cut-off at 266ºF (130ºC). Dryer shall operate at 60 dB while delivering 194 CFM of air at 125.6°F (52ºC) and 4,181 LFM during user-controlled drying cycle. Dryer shall have a total power of 1,640 W (2.2 Hp) with a consumption of 13.6 A (2905-2873). </li> <li>Overall dimensions: 117 ⁄8"H x 101 ⁄16"W x 5½"D (302mm x 256mm x 140mm). </li> <li>Weight: 9.8 lb (4,45 kg). </li> </ul>
<p><strong>Bradley, 4017-420000, 4017, Napkin/Tampon Vendor, Recessed, $0.10 for 1 Napkin </strong> </p> <p><strong>Product Materials: </strong> </p> <ul><li>CABINET: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with burr-free edges. </li> <li>DOOR: 18 gauge stainless steel with exposed surfaces in architectural satin finish, with full length piano hinge and two tumbler locks keyed like other Bradley units. </li> <li>COIN BOX: inside cabinet is 22 gauge stainless steel, secured by a separate lock keyed differently than door locks. Coin mechanisms are available with free, $.10, $.25, $.50, $1.00, € .50, or Canadian Loonie denomination. Two mechanisms are included. Coin mechanisms may be replaced in the field without removing cabinet from wall. </li> </ul> <p><strong>Capacity: </strong> </p> <ul><li>30 napkins (3" x 4-1/4" x 1" or smaller) and 28 tampons (5-1 ⁄8" long x 3/4" dia. or smaller). Dispenses all popular brands. </li> </ul> <p><strong>Operation: </strong> </p> <ul><li>Insertion of coin permits clockwise rotation of handle to dispense product. Will not accept coin when vendor is empty. Access door allows servicing of unit. </li> </ul> <p><strong>Installation: </strong> </p> <ul><li>Verify all rough-in dimensions prior to installation. Recessed unit requires rough wall opening 12-1/2"W x 26-3 ⁄8"H x 6-1 ⁄8"D (semi-recessed unit only 4" deep). Insert cabinet into wall opening and secure to framing with screws (not included) at holes provided. Shim at screw points as required. </li> </ul> <p><strong>Guide Specification: </strong> </p> <ul><li>Recessed combination napkin/tampon vendor shall be fabricated of 22 gauge stainless steel with exposed surfaces in satin finish. Door shall be fabricated of 18 gauge stainless steel with a full-length piano hinge and two tumbler locks keyed like other Bradley units. Two coin mechanisms shall permit dispensing thirty napkins and twenty-eight tampons and be available with free, $.10, $.25, $.50, $1.00, € .50, or Canadian Loonie denomination. </li> </ul>
<p><strong>Brecknell, B8D-N5-1.5K-6YB, B8D 1.5K Stainless Shear Beam Imperial Load Cell </strong> </p> <p><strong>Features </strong> </p> <ul><li>Capacity: 1500lb </li> <li>High accuracy </li> <li>Stainless steel construction </li> <li>Low profile </li> <li>OIML Cert. No.: R60/2000-NL1-11.28 </li> <li>NTEP Cert. No.: CC12-022 </li> <li>B8D load cells are available in the capacities 0.25Klb~20Klb; 0.5t~5t </li> <li>Stainless steel construction, potted by adhesive inside, oil proof, waterproof, anti-corrosive gas and medium sized making it suitable for all kinds of environments </li> <li>Single shear beam, easy for installation, suitable for electronic truck scales, automobile testing facilities, hopper scales and other electronic weighing devices </li> <li>Safe and anti-explosive product, can be used in atrocious environments and hazardous areas </li> </ul>
<p><strong>Brecknell, H2F-C1-10t-3T6, H2F 10T Alloy Steel Spoke Type Load Cell, Accuracy C1 </strong> </p> <p><strong>Features </strong> </p> <ul><li>Capacity: 10t </li> <li>Alloy steel construction </li> <li>High accuracy </li> <li>H2F load cells are available for manifold accurate measurement in the capacities 1t~50t </li> <li>Alloy steel, potted with adhesive inside, oil-proof, waterproof and anti-corrosion, suitable for all kinds of environments </li> <li>Spoke type, easy installation, suitable for electronic truck scales, hopper scales and other electronic weighing devices </li> <li>Safe and anti-explosive product, can be used in atrocious environments and hazardous areas </li> </ul>
<p><strong>Brecknell, H2F-C1-50t-3T6, H2F 50T Alloy Steel Spoke Type Load Cell, Accuracy C1 </strong> </p> <p><strong>Features </strong> </p> <ul><li>Capacity: 50t </li> <li>Alloy steel construction </li> <li>High accuracy </li> <li>H2F load cells are available for manifold accurate measurement in the capacities 1t~50t </li> <li>Alloy steel, potted with adhesive inside, oil-proof, waterproof and anti-corrosion, suitable for all kinds of environments </li> <li>Spoke type, easy installation, suitable for electronic truck scales, hopper scales and other electronic weighing devices </li> <li>Safe and anti-explosive product, can be used in atrocious environments and hazardous areas </li> </ul>
<p><strong>Brecknell, H6E-C3-150KG-2B, H6E 150KG Alloy Steel Single Point Metric Load Cell </strong> </p> <p><strong>Features </strong> </p> <ul><li>Capacity: 150kg </li> <li>Alloy steel construction </li> <li>High accuracy </li> <li>Low profile and easy installation </li> <li>H6E load cells are available in the capacities 100kg~300kg </li> <li>Alloy steel construction, nickel plated, potted by adhesive inside, oil proof, waterproof, anti-corrosive gas and medium sized making it suitable for all kinds of environments </li> <li>Single point with parallel beam, suitable for electronic scales, platform scales, belt scales and other electronic weighing devices </li> <li>Recommended platform size: 400mm x 400mm </li> </ul>
<p><strong>Brecknell, H9D-N3-1.5K-6B, H9D 1.5K Alloy Dual Shear Beam Load Cell </strong> </p> <p><strong>Features </strong> </p> <ul><li>Capacity: 1500lb </li> <li>High accuracy </li> <li>Low profile </li> <li>OIML Cert. No.: R60/2000-NL1-11.31 </li> <li>NTEP Cert. No.: CC12-015 </li> <li>H9D load cells are available in the capacities 1Klb~75Klb </li> <li>Alloy steel construction, potted by adhesive inside, oil proof, waterproof, anti-corrosive gas and medium sized making it suitable for all kinds of environments </li> <li>Dual shear beam, suitable for electronic truck scales, automobile testing facilities, track scales, tank scales and other electronic weighing devices </li> </ul>
<p><strong>Brecknell, H9D-N3-35K-6B, H9D 35K Alloy Dual Shear Beam Load Cell </strong> </p> <p><strong>Features </strong> </p> <ul><li>Capacity: 35000lb </li> <li>High accuracy </li> <li>Low profile </li> <li>OIML Cert. No.: R60/2000-NL1-11.31 </li> <li>NTEP Cert. No.: CC12-015 </li> <li>H9D load cells are available in the capacities 1Klb~75Klb </li> <li>Alloy steel construction, potted by adhesive inside, oil proof, waterproof, anti-corrosive gas and medium sized making it suitable for all kinds of environments </li> <li>Dual shear beam, suitable for electronic truck scales, automobile testing facilities, track scales, tank scales and other electronic weighing devices </li> </ul>
<p><strong>Burndy, PAT46CLWSLI </strong> <strong>, PATRIOT 15 Ton Battery Crimper, C-Head Hydraulic Self-Contained, 18V Lithium-Ion with rubber covered head </strong> </p> <p><strong>PAT46CLWSLI </strong> <strong> Includes Only: </strong> </p> <ul><li>Tool with rubber covered head </li> <li>(2) 3.0Ah 18V Lithium-ion batteries </li> <li>AC charger </li> <li>Carrying case </li> </ul> <p><strong>Features </strong> : </p> <ul><li>2" jaw opening </li> <li>Used with P dies; U dies with PUADP1 adapter (sold separately) </li> <li>Light weight, scoop style C-head with 355º head rotation </li> <li>Overmolded, ergonomic handle </li> <li>Improved ergonomic balance </li> <li>EP Enhanced Power - tools accept 2.0, 3.0, 4.0, 5.0, and 6.0Ah Makita batteries </li> </ul> <p><strong>For Use On </strong> : </p> <ul><li>Copper - #8 AWG Str. - 1500 kcmil <ul><li>Code Cable, Navy Cable, Flexible, Extra Flexible 1/2" - 1" Ground Rods </li> </ul> </li> <li>Terminals, grounding: <ul><li>to 500 kcmil; YGA, YGHA, YGF </li> </ul> </li> <li>Terminals, uninsulated: <ul><li>#8 - 1500 kcmil; YA, YA-2N, YA-L, YA-LB, YA-TC, YA-2LN, YAB-4N, YAV-L, YAV-RS, YA-TC-FX </li> </ul> </li> <li>Terminals, insulated: <ul><li>#8 - 2/0 AWG; YAEV-L, YAEV-H, YAEV-RS, YAEV-RH </li> </ul> </li> <li>Splices: <ul><li>#8 - 1500 kcmil; YS, YS-T, YS-L, YS-LB, YST, YSP-T, YGS, YGHS </li> </ul> </li> <li>Taps: <ul><li>#14 - 1000 kcmil; YH, YCHC to 4/0 AWG; YC-C </li> </ul> </li> <li>Taps, grounding: <ul><li>to 500 kcmil; YGHC-C, YGHP-C, YGHR-C </li> </ul> </li> <li>Aluminum - #8 AWG - 1250 kcmil <ul><li>Code Cables </li> </ul> </li> <li>Terminals: YA-A, AYP, AYPO </li> <li>Splices: YS-A, YS-AT, YRB </li> <li>Taps: YFD, YFN, YFO, YFR </li> </ul>
<p><strong>Burndy, RHCC129ACSR, 1.29" Copper / Aluminum / 1113 ACSR Remote Power Operated Hydraulic Cable Cutter </strong> </p> <p>The Burndy® RHCC129ACSR remote hydraulic cable cutter incorporates a specialized latch style cutting head that allows interference-free closure for mid-span cuts. The RHCC129ACSR with its precision cutting blades is capable of cutting up to 1.29 diameter bare or insulated copper and aluminum cable, 1113 ACSR, 5/8" ground rod, 1/2" rebar, 5/8" diameter soft steel bolts, 1/2" standard guy strand, and up to 3/8 EHS guy strand. </p> Features & Benefits: </strong> </p> <ul><li>Specialized latch head design. <ul><li>Interference free closure for mid-span cuts. </li> </ul> </li> <li>Precision cutting blades <ul><li>For clean cuts on Cu/Al, ACSR, ground rods, rebar, guy strand, and soft steel bolts. </li> </ul> </li> <li>High strength steel cylinder <ul><li>For durability and long life </li> </ul> </li> <li>Lightweight ergonomic design allows one hand operation <ul><li>User has one hand free to manipulate material to be cut </li> </ul> </li> <li>Durable canvas carrying bag. <ul><li>Provides tool protection and stores all accessories </li> </ul> <ul><li>Customer satisfaction and support. </li> </ul> </li> </ul> <p> <img src="//usmegastore.com/assets_images/depiction/burndy/feat22.jpg" width="532" height="324" /> </p> For Use on: </strong> </p> <ul><li>Copper Cable: up to 1.29" </li> <li>Aluminum Cable: up to 1.29" </li> <li>ACSR: up to 1113 ACSR </li> <li>Ground Rod: up to 5/8"" </li> <li>Rebar: up to 1/2"" </li> <li>Soft Steel Bolts: up to 5/8"" </li> <li> Standard Guy Strand: up to 1/2"" </li> <li>EHS Guy Strand: up to 3/8" </li> </ul>