Attribute Values: Other

APG, 0792187X36X36, 3/16" x 36" x 36" Cork and Neoprene Medium Hardness DC-100 Sheet A neoprene rubber sheet to which very fine cork particles have been added to create a homogeneous material with great compressibility combined with the resiliency of neoprene. A general purpose gasket and sealing material that has high cork content, minimum side flow. An excellent material for very narrow flange gaskets and for low bolt load applications. For oil, non-aromatic petroleum derivatives, fatty oils, and solvents (except chlorinated, aromatic, or ketone types). Shore A Hardness 55 to 70. Temperatures to 275°F.

APG, 13850FF125B0200FC, 1/8" Thick Thermoseal, C4401 Full Face Gasket, Green 300# For 2" Pipe Synthetic fiber, nitrile binder, excellent sealability, excellent chemical resistance, good creep relaxation, good general purpose sheet. Tensile strength 1500 psi typical. Change in tensile strength 25% maximum decrease.

APG, 13860FF125A1600FC, 1/8" Thick Cna750 Full Face Gasket, Green 150# For 16" Pipe Nitrile bound non-asbestos gasket material. Displays good torque retention and excellent creep resistance. Good resistance to oil, solvents, and many other media. Tensile strength 1670 psi typical. Change in tensile strength 25% maximum decrease.

APG, 3E2030SASS, Tough-Tite, 2" X 3" 316 Stainless Steel Part SA, 2 X 3 316 S/S Spool Adapter

APG, 3GFPB06X04, 3/8" Brass Hose Barb Fitting, Hose Barb X NPT Female Thread

APG, 3GHLM12X12, 3/4" Brass Push-On, Hose Barb X NPT Male Thread

APG, 3TCNP0150, 1 1/2" Plated Steel Combination Nipple, Hose Shank X NPT Male Thread

APG, 3TCNS0100, 1" Plain Steel Combination Nipple, Hose Shank X NPT Male Thread

APG, 3TCNSS075, 3/4" 316 Stainless Steel Combination Nipple, Hose Shank X NPT Male Thread

APG, 3TPHA2510T, 2-1/2" Brass Hydrant Adapters, Male NPT Hydrant Adapter X Female Nst

Applications <ul><li>Chemical, pulp and paper, oil and gas refineries, military, air compressors and machine tools </li> <li>Well-suited for a variety of processing and general industry hydraulic applications </li> </ul> Use <ul><li>Ideally suited for use with tubing having medium to extra heavy wall thicknesses. </li> <li>Fittings are suitable for sub-zero through elevated temperature applications </li> </ul> Specifications <ul><li>Exceeds Military (MIL F18866) and SAE J514 standards </li> </ul> Features <ul><li>3 piece design including only one ferrule eliminates possible make-up errors that may occur using a twin ferrule tube fitting. </li> <li>Minimal risk of improper assembly as the ferrule visibly bites into the tubing which allows installer to visually inspect the bite quality. </li> </ul> Installation <ul><li>Cut, de-burr and clean tubing </li> <li>Pre-set ferrule onto tubing </li> <li>Inspect ferrule bite in tubing by disassembling the fitting and visually inspecting the de-burred end of the tube for slight indentation. </li> <li>Finger tighten nut and then further wrench tighten nut another 1/3" to 1/2" turn. </li> </ul> Note <ul><li>Temperature rating is limited by the material chosen </li> <li>Pressure ratings are determined by the size (OD) and wall thickness (inches/mm) of the tubing on which they are to be installed </li> </ul>

Applications <ul><li>Designed for use in air brake systems or cab controls </li> </ul> Use <ul><li>Utilize ribbed sleeve for compression and positive grip </li> <li>Compatible tubing: SAE J844 type A and B </li> </ul> Specifications <ul><li>Meets D.O.T FMVSS 571.106, SAE J1131 and SAE J2494 </li> <li>Ref. SAE 100102 BA </li> </ul> Features <ul><li>Positive grip </li> </ul> Construction <ul><li>Machined from CA260, CA345 or CA377 brass </li> <li>Pre-applied thread sealant </li> <li>Thread sealant may be white or burnt orange </li> </ul> Installation <ul><li>Cut tubing squarely- maximum of 15° angle allowable. </li> <li>Check that port or mating part is clean and free of debris. </li> <li>Insert tubing into fittings until it bottoms on seat. </li> <li>Tighten nut with wrench until one thread remains visible on the fittings body; (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench-tightened according to the tube size used. </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Applications <ul><li>Designed for use in air brake systems or cab controls </li> </ul> Use <ul><li>Utilize ribbed sleeve for compression and positive grip </li> <li>Compatible tubing: SAE J844 type A and B </li> </ul> Specifications <ul><li>Meets D.O.T FMVSS 571.106, SAE J1131 and SAE J2494 </li> <li>Ref. SAE 100302 BA </li> </ul> Features <ul><li>Positive grip </li> </ul> Construction <ul><li>Machined from CA260, CA345 or CA377 brass </li> <li>Pre-applied thread sealant </li> <li>Thread sealant may be white or burnt orange </li> </ul> Installation <ul><li>Cut tubing squarely- maximum of 15° angle allowable. </li> <li>Check that port or mating part is clean and free of debris. </li> <li>Insert tubing into fittings until it bottoms on seat. </li> <li>Tighten nut with wrench until one thread remains visible on the fittings body; (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench-tightened according to the tube size used. </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Applications <ul><li>Designed for use in air brake systems or cab controls </li> </ul> Use <ul><li>Utilize ribbed sleeve for compression and positive grip </li> <li>Compatible tubing: SAE J844 type A and B </li> </ul> Specifications <ul><li>Meets D.O.T FMVSS 571.106, SAE J1131 and SAE J2494 </li> <li>Ref. SAE 100424 BA </li> </ul> Features <ul><li>Positive grip </li> </ul> Construction <ul><li>Machined from CA260, CA345 or CA377 brass </li> <li>Pre-applied thread sealant </li> <li>Thread sealant may be white or burnt orange </li> </ul> Installation <ul><li>Cut tubing squarely- maximum of 15° angle allowable. </li> <li>Check that port or mating part is clean and free of debris. </li> <li>Insert tubing into fittings until it bottoms on seat. </li> <li>Tighten nut with wrench until one thread remains visible on the fittings body; (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench-tightened according to the tube size used. </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Applications <ul><li>Designed for use with liquids </li> </ul> Specifications <ul><li>Produced to interchange with all product produced to Commercial Item Description A-A-59326D </li> </ul> Construction <ul><li>Produced as a welded fabrication </li> </ul> How it works <ul><li>To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. </li> <li>Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. </li> </ul> Safety notes <ul><li>Under no circumstances should cam and groove couplings be used for compressed air or steam service! </li> <li>Pressure rating is based on the seal of the mating part </li> <li>Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F / 21°C with a standard seal installed. </li> </ul>

Applications <ul><li>Designed for use with liquids </li> </ul> Specifications <ul><li>Produced to interchange with all product produced to Commercial Item Description A-A-59326D </li> </ul> Construction <ul><li>Produced as a welded fabrication </li> </ul> How it works <ul><li>To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. </li> <li>Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. </li> </ul> Safety notes <ul><li>Under no circumstances should cam and groove couplings be used for compressed air or steam service! </li> <li>Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. </li> </ul>

Applications <ul><li>Designed for use with liquids </li> </ul> Specifications <ul><li>Produced to interchange with all product produced to Commercial Item Description A-A-59326D </li> </ul> How it works <ul><li>To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. </li> <li>Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. </li> </ul> Safety notes <ul><li>Under no circumstances should cam and groove couplings be used for compressed air or steam service! </li> <li>Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. </li> </ul>

Applications <ul><li>Grooved clamps are often used on pipe connections on dry bulk tankers in place of welding offering the ability to adjust, change or replace pipe sections without the need for a permanent joint such as a weld. </li> </ul> Use <ul><li>Designed to join two pieces of pipe together. </li> <li>White Buna-N seal is for use in dry bulk food applications </li> <li>Use of lock nuts prevents clamps from loosening in high vibration applications </li> </ul> Specifications <ul><li>Manufactured to fit new and existing grooved pipe connections. </li> <li>Weight: 1.38 lbs. </li> </ul> Features <ul><li>Precision forged to provide an exact fit and great appearance </li> <li>Unlike steel groove clamps that secure pipe ends with high clamping force against tubing/piping walls, the Dixon aluminum clamp takes the full bolt force and locks into the groove of the tube/pipe, preventing distortion of the tube/pipe diameter. </li> <li>Precision casting and machined dimensions provide an exact fit and great appearance </li> <li>Easy to preform maintenance </li> <li>Leak-tight connection </li> </ul> Construction <ul><li>Aluminum body </li> <li>Steel bolts/nuts </li> <li>White Buna-N seals </li> </ul> How it works <ul><li>The two pipes are butted to one another each pipe has a groove that runs the circumference of the pipe exterior. The grooved clamp has ridges that lock into the two pipe grooves and a gasket is compressed to the pipes to create a leak-tight seal. </li> </ul> Note <ul><li>Supplied clamp gasket must be installed prior to use. Ships separately. </li> <li>Replacement gaskets are available. </li> </ul> Safety notes <ul><li>Torque the bolts until metal to metal contact occurs at the bolt pads (about 20 ft-lbs). Bolts must be tightened evenly to prevent gasket pinching and clamp breaking. DO NOT tighten one side then the other. Over-torquing will not improve sealing and may result in failure of the clamps. DO NOT torque bolts over 30 ft-lbs. </li> </ul>

Applications <ul><li>High Purity BioPharm fittings are commonly used in pharmaceutical, bioprocessing, semiconductor, cosmetics, food processing and beverage markets </li> </ul> Specifications <ul><li>All fittings are manufactured to meet the latest edition of the ASME BPE International Standard, Bioprocessing Equipment. </li> <li>316L stainless steel material and dimensions meet all orbital welding specifications with controlled sulphur. </li> <li>3-A Sanitary Standards for Sanitary Fittings, Number 63-03 (Authorization number 621). </li> <li>PL Finish - SF1 (OD= 32R </li> </ul> Note <ul><li>Product markings per ASME BPE 2012 DT-10.1 </li> <li>Product markings include: job number, 316L, part number, heat number(s), surface finish code, ASME BPE </li> <li>Per the specification, the size of the fitting may limit the space available for markings. When that occurs, not all markings are included. </li> <li>The part number will describe the part configuration and size. </li> <li>MTR (Material test report) certifications are included inside the resealable bag with each fitting. The MTRs are traceable through the Job Number found on each fitting. All fittings are capped to prevent damage and contamination. For easy identification each finish will have a different color cap; PL finish has blue caps and PM finish has white caps. </li> </ul>

Applications <ul><li>High Purity BioPharm fittings are commonly used in pharmaceutical, bioprocessing, semiconductor, cosmetics, food processing and beverage markets </li> </ul> Specifications <ul><li>All fittings are manufactured to meet the latest edition of the ASME BPE International Standard, Bioprocessing Equipment. </li> <li>316L stainless steel material and dimensions meet all orbital welding specifications with controlled sulphur. </li> <li>3-A Sanitary Standards for Sanitary Fittings, Number 63-03 (Authorization number 621). </li> <li>PM Finish - SF1 (OD= 32R </li> </ul> Note <ul><li>Product markings per ASME BPE 2012 DT-10.1 </li> <li>Product markings include: job number, 316L, part number, heat number(s), surface finish code, ASME BPE </li> <li>Per the specification, the size of the fitting may limit the space available for markings. When that occurs, not all markings are included. </li> <li>The part number will describe the part configuration and size. </li> <li>MTR (Material test report) certifications are included inside the resealable bag with each fitting. The MTRs are traceable through the Job Number found on each fitting. All fittings are capped to prevent damage and contamination. For easy identification each finish will have a different color cap; PL finish has blue caps and PM finish has white caps. </li> </ul>

Applications <ul><li>Ideal for heavy-duty washdown, refineries and power plants </li> </ul> Construction <ul><li>Outer: Yellow, Thick Ribbed Nitrile </li> <li>Tube: Nitrile </li> </ul> Safety notes <ul><li>Under no circumstance should the hose be used beyond the working pressure of the fittings to which it is coupled. </li> <li>Assembled hose should be hydrostatically proof tested before use, and thereafter in accordance with NFPA 1962. </li> </ul>

Applications <ul><li>Ideal for open end discharge applications. </li> </ul> Construction <ul><li>Outer: White, Single Jacket, all synthetic </li> <li>Tube: Black, natural rubber liner </li> <li>Coupled with Type C coupler x hose shank and Type E adapter x hose shank Global Aluminum Cam & Groove couplings, crimped. </li> </ul> </ul> Safety notes <ul><li>Not intended for fire fighting service. </li> </ul>

Applications <ul><li>In many areas fuel stations are equipped with dual point tank connections, one connection is for the fuel delivery, and the other connection is for the vapor recovery connection. The vapor elbow bottom connection is connected to the fuel station on a ground tank vapor adapter and the top connection to the vapor hose, which returns the fuel vapors back to the tanker. </li> </ul> Specifications <ul><li>Manufactured to connect to in ground fuel station vapor adapters and cam and groove vapor hose connections. </li> <li>Ground clearance: 13-3/4" </li> </ul> Features <ul><li>Grease nipple enables the greasing of the lever stem, and Acetal bushings help keep everything moving smoothly, even in the harshest of conditions. </li> <li>Inlet probes are standard </li> <li>Bolt on outlets allow the outlet to be changed without having to worry about galling of threads. </li> <li>Ergonomic ball handle lever </li> </ul> Construction <ul><li>Rugged modular cast aluminum body </li> <li>Aluminum handle </li> <li>Stainless steel hardware </li> <li>Baylast™ and Buna seals </li> <li>Acetal bushings </li> </ul>

Applications <ul><li>Over-under units are space savers and provide for installation in tight areas. </li> <li>One common inlet/outlet for both filter and regulator saves on piping costs. </li> </ul> Use <ul><li>To increase regulated pressure, pull adjusting knob and turn clockwise. To reduce pressure, turn knob counter clockwise. To lock knob, push down. </li> </ul> Features <ul><li>Automatic Drain </li> <li>Metal Bowl with Sight Glass </li> <li>10 - 250 PSIG adjusting range </li> <li>5 micron element </li> <li>6 oz. bowl </li> <li>Self-relieving standard </li> <li>Spring-loaded diaphragm </li> <li>Two 1/4" gauge ports located on the front and rear faces of the body. These ports may be used as additional regulated ports or for pressure gauges. Plug unused port(s). </li> <li>Supplied with a GC230 gauge </li> <li>Supplied with a GC230 gauge </li> </ul> Safety notes <ul><li>FRL's are designed for air service only, unless otherwise indicated. </li> <li>SCFM ratings at 100 PSIG inlet pressure </li> </ul>

Applications <ul><li>Recommended for food, dairy and pharmaceutical applications where increased flow capacity is important. </li> </ul> Construction <ul><li>Ferrules have a surface finish of 63 or better </li> </ul> Safety notes <ul><li>Dixon Sanitary Crimp ferrules are to be used with Dixon Sanitary crimp stems only. </li> <li>Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure. </li> <li>Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations. </li> <li>Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting. The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure. </li> <li>Media being transported through the hose should be compatible with the stem material. Compatibility of ferrule material with the environment in which it will be used is recommended. Consult the Compatibility Chart for material compatibility. </li> </ul>

Applications <ul><li>Recommended for low-pressure discharge and suction service for compatible liquids. </li> </ul> Note <ul><li>Consult factory for pressure rating. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> </ul>

Applications <ul><li>Suitable for conveying acids, chemicals, foods and pharmaceuticals. </li> </ul> Note <ul><li>Crimp collars for all True ID fittings are sold separately </li> </ul>

Applications <ul><li>Suitable for conveying chemicals, foods, pharmaceuticals, oils, gas, fuels and steam. </li> </ul> Specifications <ul><li>Nominal standard smooth bore PTFE hose meets SAE100R14 </li> </ul> Construction <ul><li>304 stainless braided </li> </ul> Note <ul><li>Fittings not included </li> <li>Hose sold in per foot lengths </li> </ul>

Applications <ul><li>Suitable for water, potable liquids and neutral gas applications, including water filtration, water coolers, coffee machines and beverage dispensers </li> </ul> Specifications <ul><li>FDA compliant </li> <li>NSF-51 listed for contact with food </li> <li>NSF-61 list C-Hot rated </li> <li>Meets California and Vermont <0.25% lead requirements</li> </ul> Features <ul><li>EPDM seal secures connection with larger surface area than standard O-rings </li> <li>Engineered polymer allows superior mechanical strength and chemical resistance </li> <li>Full stainless gripping ring eliminates the need for locking clips </li> <li>Release button protects and supports tubing </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Applications <ul><li>These gate valves can be used on the suction intake and discharge sides of a pumper or on a hydrant. </li> </ul> Construction <ul><li>High strength aluminum alloy, 356-T6 </li> <li>Finish hardcoat anodized throughout - minimum thickness 0.001" </li> <li>Non-rising stem, with an air bleed off </li> </ul>

Applications <ul><li>Used in the fast paced transfer of water and sand slurry at hydraulic fracturing sites. </li> </ul> Features <ul><li>One-piece design eliminates leak path experienced with two-piece threaded systems </li> </ul> Construction <ul><li>Frac fittings: machined iron to ASTM standards; zinc plated </li> <li>Nut: forged steel meeting AISI standards </li> </ul> Compatibility & Interchange Data <ul><li>Interchangeable with current fittings; phase them into your current operation </li> </ul> Safety notes <ul><li>4:1 safety factor (SF) </li> <li>Pressure rating given at 70°F/21°C </li> </ul>

Applications <ul><li>Used in the fast paced transfer of water and sand slurry at hydraulic fracturing sites. </li> </ul> Use <ul><li>Water and petroleum transfer hoses rated from 100 to 300 PSI WP (4:1 SF) have excellent test results with the standard King Crimp ferrules CF400-xxCS) </li> </ul> Features <ul><li>One-piece design eliminates leak path experienced with two-piece threaded systems </li> <li>Durable and safe with reliable hose retention when crimped as specified </li> </ul> Construction <ul><li>Machined Iron to ASTM standards </li> <li>All stems are zinc plated </li> </ul> Compatibility & Interchange Data <ul><li>Interchangeable with current fittings; phase them into your current operation </li> </ul> Safety notes <ul><li>400 PSI working pressure with a minimum 4:1 safety factor (hose burst: hose working pressure) is only achieved with standard crimp ferrules, part numbers CF300-1CS through CF300-16CS </li> <li>Pressure rating given at 70°F/21°C </li> <li>Pressure rating given at 70°F </li> </ul>

Applications <ul><li>Used to replace damaged indicators on filters and modular coalescing filters. </li> </ul> Features <ul><li>Pressure loss changes color of indicator window from green to red. </li> </ul>

Applications: <ul><li>Dry bulk blower </li> </ul> Features: <ul><li>800 to 1700 CFM </li> <li>TTMA by 3"or 4" NPT thread adapter </li> <li>Easy to inspect and rebuild check valve </li> <li>Springs and pivots are contained. Cannot enter air stream. </li> <li>3090MA swing check manifold </li> <li>Blower relief valve </li> <li>Dust cap with lanyard </li> <li>One assembly with all components needed for installation directly on the blower </li> </ul>

Applications: <ul><li>Used for low pressure corrosive media where diaphragm seal protection is needed </li> <li>Processes where low or high temperature will affect seal fill fluid </li> </ul> Description & Features: <ul><li>A combination pressure gauge and diaphragm seal forming one unique instrument that measures low pressures where protection from the process media is required </li> <li>Bottom connection only </li> <li>All stainless steel construction </li> <li>A variety of materials available </li> <li>ASME B40.100 compliant </li> <li>CRN registered </li> <li>5 year warranty </li> </ul>

Applications: <ul><li>Industrial </li> <li>Rack and reel assemblies </li> </ul> Specifications <ul><li>For water only </li> </ul> Features: <ul><li>Straight steam, fog, shut-off </li> </ul> Approvals <ul><li>FM approvals </li> <li>UL Listed </li> <li>ULC Listed </li> </ul>

AR North America, AGFM76008-PKG, Rapid Check Flowmeter 19.8 - 194 GPM

AR North America, AR251420-15mm, 25' 1/4" F x 22x15mm Oil Resistant Synthetic Rubber Hose Oil Resistant Synthetic Rubber Hoses will meet the pressure ranges for consumer needs. Select the length and fittings needed for each situation.

AR North America, PW236-1.30, Adjustable Vari-Spray Lance for AR610 Power Washers Features: <ul><li>Adjustable spray nozzle lance is designed to change the spray pattern and intensity according to the power of water needed for each task, just twist the nozzle to adjust. </li> <li>For unit AR610 </li> </ul>

AR1040810 - Hose Tail 13 x 24

AR40-SP/A3/4, Semi-Hydraulic 2 Diaphragm Alternating Volumetric Pump with 3/4" Solid Keyed Through Shaft Annovi Reverberi AR40-SP/A3/4 550 RPM semi-hydraulic two diaphragm alternating volumetric pump for use in gardening or semi-professional agricultural sector, trolley-mounted in combination with electric motors or internal combustion engines for gardening, and small sprayers for medium-pressure pesticide treatments in gardens, greenhouses, orchards or vineyards. Features: <ul><li>Parts in contact with pumped liquids in plastic-coated aluminium and body in aluminium </li> <li>Diaphragms in NBR, Desmopan or Viton </li> <li>Seals in NBR or Viton </li> <li>Die-cast casing with oil-immersed mechanism and clear plastic tank for visual level checking </li> <li>Pistons with ring for a more efficient “oil cushion” system to protect the diaphragm </li> <li>New-design diaphragm cut-out system to prevent contact tearing even in heavy-duty operating conditions </li> <li>Spherical sector profile valves for lower flow resistance and improved volumetric efficiency </li> </ul>

Assured Automation, WM-NLC-200, WM-NLC Series 2" MNPT, Lead Free Brass Water Meter, Range 8-120 GPM The WM-NLC Series meter is a multijet dry-type totalizing water meter. It is produced in an ISO9001 certified production facility and is constructed in conformance with AWWA C708 standards. The product complies with NSF/ANSI 61 Annex G and conforms with lead-free plumbing as defined by California, Vermont, Maryland and Louisiana state laws and the U.S. Safe Drinking Water Act that took effect January, 2014. Water flows through the meter’s strainer and into the measuring chamber where it drives the impeller. The impeller drives the mechanical register dials via a magnetic coupling. The WM-NLC Series water meter consists of three basic components: main case, measuring chamber, and head ring. The main cases of all sizes are constructed using C87850 low-lead brass alloy. Includes: <ul><li>2x NPT to Meter couplings with Gaskets </li> </ul> Features: <ul><li>Dry Top Multi-jet Design simple, accurate, wide flow range, tolerates low quality water </li> <li>Hinged Lens Cover protects display and register </li> <li>Union End Couplings for easy service </li> <li>Corrosion Resistant All parts in contact with water are constructed of corrosion-resistant materials </li> <li>Lead Free body and coupling are made with low-lead brass alloy C87850 and meets potable water standards </li> <li>Impeller is the only moving part in contact with water , giving the meter long life and consistently reliable operation </li> <li>Extra filter at the inlet of the meter body permits cleaning without having to open the meter </li> <li>Magnetic Drive eliminates potential leak point </li> <li>Easy to Read Register Display odometer and needle dial have large clear digits </li> <li>Dial plate design in US Gallons </li> </ul> Applications: <ul><li>Residential & Commercial </li> <li>Metering and Sub-Metering </li> <li>Industrial Food & Beverage </li> <li>Plant Process Water </li> <li>Cement Mixers </li> <li>Pond Water Feed Lines </li> </ul>

Available Options <ul><li>Other alloys are available </li> </ul>

Azer Scientific, ES0117580, High Precision Cover Glass 1.5H, 18mm Circle Features: <ul><li>High precision circle cover glass recommended for objectives with high aperture and resolution </li> <li>Exceptionally accurate thickness 170 µm ±5µm </li> <li>Thickness No. 1.5H </li> <li>Diameter: 18mm </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Case of 1000 pcs </td> </tr> </table>

Bahco, 21HDG-180A, Side Cutting Pliers Angled at 14° for Heavy-Duty Applications Features: <ul><li>Material: High performance alloy steel, ERGO™ handles with 2-component combination, thermoplastic surface on tough polypropylene which gives superior grip </li> <li>Induction hardened cutting edges </li> <li>Heavy-duty cutting edge </li> <li>Screw joint that provides excellent running and accurate alignment of the cutting edges </li> <li>The distance from the joint to the centre of the cutting edges is reduced: giving greater leverage and increased cutting capacity </li> <li>Metal frame with angled head at 14° designed to enhance accessibility in confined spaces </li> <li>Equipped with a patented return spring featuring an on/off function </li> </ul>

Bahco, BAH8820SL-2P, Insulated Interchangeable Blades with Reduced Diameter for Pozidriv Head Screws, 100mm Features: <ul><li>Insulated interchangeable blades with reduced diameter </li> <li>For Pozidriv head screws; blades of 100mm lenght (out of the handle) </li> <li>The blades with reduced diameter let users access to sunken screws and spring elements </li> <li>For work on live equipment, up to 1000 V </li> <li>To be used only with the Insulated Ratcheting Screwdriver 808060 </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 2 pcs </td> </tr> </table>

Bahco, BAHBE-8230SL, Ergo Insulated Slotted Screwdriver with Slim Blades 3.5mm Features: <ul><li>Insulated screwdriver with SLIM blades for slotted head screws developed according to the scientific ERGO™ process </li> <li>For work on live equipment up to 1000 volts </li> <li>Handle: 3-component handle, for maximum user comfort and force transmission </li> <li>High performance alloy steel blade, insulation moulded directly onto blade. Black finish tip for higher accuracy </li> <li>Reduced blade diameter. The blades are 30% slimmer than regular insulated blades for better accessibility </li> <li>ISO 2380 / DIN 5264 </li> <li>Individually inspected and manufactured according to IEC 60900 </li> </ul>

BCRSOCKR24, BCRSOCKR24-Series Cleanroom Socks BCR® Cleanroom socks provide the next level of cleanroom foot health and operator comfort during regular and extended wear. They are engineered with 96% nylon and 4% Lycra microdenier technology. This technology and protection does not diminish with laundering. The micro denier technology provides the sock with superior cool feeling and comfort. Because of the enhanced wicking function, contact discomfort associated with wearing regular cotton or polyester socks is greatly reduced. Features: <ul><li>96% microdenier nylon and 4% double covered Lycra </li> <li>One size fits shoe size from adult 5 -11 </li> <li>Ambidextrous for easy stock control </li> <li>Extremely soft and comfortable </li> <li>BCR® Cleanroom socks are over 1,000 times cleaner than regular cotton/polyester socks </li> <li>Autoclavable </li> <li>Color: White </li> <li>6 pairs per pack for individual use </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 144 pairs </td> </tr> </table>

Bel-Art Products, 18819-0023, Lab-Aire II 3 Tier Electric Double-Sided Benchtop Dryer 120V offer a compact footprint and accelerate drying of labware with warm, circulating air. Conserve benchtop space by placing single-sided models up against the wall. Double-sided models double your capacity with only a slightly larger footprint and can be turned perpendicular to the benchtop for easy access to both sides. Key Features: <ul><li>76 pegs (24 small, 28 medium, 24 large) / 4 baskets / 28 peg plugs </li> <li>400 watts of drying power gently circulates heated air into and around items to decrease drying time. </li> <li>Heat selector knob with three temperature settings: high, medium and low. </li> <li>Power button illuminates when in use, and an 8-amp @ 120V (4-amp @ 230V) circuit breaker and independent thermo-fuse protects unit from overheating. </li> <li>Select from single and double sided models with up to 76 peg locations and 4 baskets. </li> <li>Electric drying efficiency is enhanced with a replaceable polyurethane foam filter that keeps warmed air dust free. Redirect air flow by inserting plugs instead of pegs into unused peg holes. </li> <li>Like the non-electric benchtop models these freestanding dryers have sturdy bases with excellent balance and can be placed on any flat surface. </li> <li>Removable polypropylene baskets serve as storage for small labware and extra pegs </li> <li>Footprint: 42.5cm x 25.4cm x 57.7cm (16.75" x 10" x 22.7") </li> </ul>

Bel-Art Products, 36922-0010, Sterileware 60ml White Sterile Scoop with Clear Lid and Sampling System The Sterileware® Scoop Sampling System lets you gather your sample and then store and transport it in the same scoop, saving time and eliminating the need for separate sterile bags or other containers Features <ul><li>High-impact polystyrene scoops with detachable lids have a long handle that increases distance between the hand and sample to reduce contamination potential </li> <li>Lid has a lock-tab to prevent displacement </li> <li>Made from FDA grade materials, sterilized by Gamma Irradiation, lot stamped for accurate lot tracing, and shipped with a Certificate of Processing for Sterilization </li> <li>The lid can be marked with wax pencil or adhesive label </li> <li>Capacity: 60ml (2oz) </li> <li>Bowl: 7.6 x 2.5 x 2.5cmH (3 x 1 x 1") </li> <li>Total Length: 20.3cm (8") </li> </ul>

Bel-Art Products, 50029-0040, Box Economy Sleeved Gloves for 6in Glove Ports - Extra Large One piece, bonded neoprene protection against liquid or gas penetration. Fits glove boxes with 6" glove ports. Key Features: <ul><li>11 Size </li> <li>Neoprene Protection </li> <li>Requires clamping rings </li> </ul>

Bel-Art Products, 60300-0100, Easy-Read Partial Immersion Thermometer, -10/150C Easy-Read® thermometers are individually serialized and includes a Statement of Accuracy indicating accuracy traceable to NIST*. Accurate to the requirements of ANSI/SAMA Z236.1- 1983, ASTM, NIST, DAkkS and/or equivalent standards. Each item is tested and calibrated in our exclusive triple accredited/registered ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST Individually packaged in Safety-Pak'1 packaging to prevent breakage. Ideal for use in chemical laboratories, universities, scientific institutions, food and beverage processing, petrochemical laboratories, pharmaceutical industry, medical industry, manufacturers, dairies, breweries and distilleries.

Bel-Art Products, 60400-0700, Double-Safe Partial Immersion Thermometer, -20/150C Added safety and protection from breakage! In the event of breakage, the PFA flouropolymer safety coating keeps the liquid and glass encapsulated. Double-Safe™ Thermometers feature a multi-language (English, French, German, Italian, Portuguese and Spanish) Statement of Accuracy indicating accuracy traceable to NIST and DAkkS. Each item is tested and calibrated in our exclusive triple accredited/registered ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST and DAkkS. Ideal for use in chemical laboratories, universities, scientific institutions, food and beverage processing, petrochemicalaboratories, pharmaceutical industry, medical industry, manufacturers, dairies, breweries and distilleries.

Bel-Art Products, 60400-1000, Double-Safe Partial Immersion Thermometer, 0/300F Added safety and protection from breakage! In the event of breakage, the PFA flouropolymer safety coating keeps the liquid and glass encapsulated. Double-Safe™ Thermometers feature a multi-language (English, French, German, Italian, Portuguese and Spanish) Statement of Accuracy indicating accuracy traceable to NIST and DAkkS. Each item is tested and calibrated in our exclusive triple accredited/registered ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST and DAkkS. Ideal for use in chemical laboratories, universities, scientific institutions, food and beverage processing, petrochemicalaboratories, pharmaceutical industry, medical industry, manufacturers, dairies, breweries and distilleries.

Bel-Art Products, 60730-0200, Durac Plus Partial Immersion Thermometer Each thermometer is individually serialized and includes a Statement of Accuracy indicating accuracy traceable to NIST*. Accurate to the requirements ul ANSI/SAMA Z236.1-1983, AS'M, NIST. DAkkS and/or equivalent standaids. Each item is tested and calibrated in our exclusive triple accredited/ registered ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST. Individually packaged in Safety-Pak packaging to prevent breakage. Ideal for use in chemical laboratories, universities, scientific institutions, food and beverage processing, petrochemicallaboratories, pharmaceutical industry, medical industry, manufacturers, dairies, breweries and distilleries.

Bel-Art Products, 60740-0600, DURAC Plus Armored Liquid-In-Glass Thermometer, 0/230F Each partial immersion thermometer is organic liquid filled against white back glass, individually serialized and comes with a Statement of Accuracy indicating accuracy traceable to NIST. All thermometers are tested and calibrated in H-B's exclusive triple accredited/registered ISO/ IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST. Armored thermometers meet or exceed the requirements for physical dimensions and accuracy of ANSI/SAMA Z236.1-1983, where ranges are specified. Each thermometer features an open protective nickel plated brass armor which protects the thermometer from accidental breakage during use and storage. Lower section surrounding the bulb features small openings for circulation. Fitted with screw cap and ring top. Individually packaged.

Bel-Art Products, 60900-0200, DURAC Refrigerator/Freezer Electronic Thermometer, -50/70C (-58/158F) Single display with the ability to switch between room and refrigerator/freezer temperatures, maximum/minimum temperature memory, high/low alarm, 1-30mm (1.2 in) waterproof cable, magnetic back and one LR44 battery. Supplied with multi-language (English, French, German, Italian, Portuguese and Spanish) instructions and Statement of Traceability indicating accuracy traceable to NIST and DAkkS. Each item is tested and calibrated in our exclusive triple accredited/registered ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST and DAkkS.

Bellco Glass, 2298-00000, 125mL Erlenmeyer Flask, Solid Cap, Plain Bottom, PETG, Sterile Designed for mammalian suspension culture applications as well as bacterial & yeast culture. Vent caps feature 0.22um hydrophobic membrane which allows for gas exchange without contamination; over-sized vent area in cap improves gas exchange. Features: <ul><li>Packaged sterile in individual bags for easy storage and handling </li> <li>Manufactured from medical grade virgin PETG which reduces gas permeability </li> </ul> <table border="0" cellpadding="2" cellspacing="1" class="dataTable" style="width:100%"><tbody><tr><td>Unit of Measure </td> <td>Pack of 12 pcs </td> </tr> </tbody> </table>

Bellco Glass, 2299-13000, 1mL CF Cryogenic Vial, Internal Thread, Self-Standing, Sterile CELLTREAT Freeze Cryogenic Vials are designed for storing biological material at temperatures as low as -196C, in the gas phase of liquid nitrogen. CELLTREAT product descriptions are based on the highest graduation mark on the vial. Other brands may name vials based on actual liquid capacity. External thread cap features integrated leak-proof seal, a long skirt for easy one hand aseptic methods, and a thread design allowing it to be removed or sealed with a mere 1 1/4 turn. internal thread cap prevents contamination and uses O-ring silicone seal to ensure positive seal at any temperature. Features: <ul><li>Self-standing re-sealable bags offer a unique storage solution </li> <li>Caps have textured ridges to provide gripping when wearing gloves </li> <li>Contrasting black graduations are large and easy to view </li> <li>Large white marking area for writing also provides backdrop to enhance black graduations </li> <li>Self-standing base interlocks with Easy Grip Workstation Rack for easy one-handed opening </li> </ul> <table border="0" cellpadding="2" cellspacing="1" class="dataTable" style="width:100%"><tbody><tr><td>Unit of Measure </td> <td>Pack of 100 pcs </td> </tr> </tbody> </table>

Bellco Glass, 5623-00600, Polypropylene Griffin Graduated Beaker, 600 mL Polypropylene beakers are useful for general laboratory procedures and are autoclavable. They have blue graduations to aid in viewing and dispensing liquids. <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 6 pcs </td> </tr> </table>

Bellco Glass, 5637-68000, 15000 mL Media Bottle Only (without Screw Cap) Type 1 Class A - borosilicate glass bottles are chemically resistant and stable. They are suitable for storage as well as for mixing and sampling and are autoclavable.

Bellco Glass, 7340-09115, Digital Bottom Drive Roller Apparatus 9 Deck, 115V W/O Battery Backup

Bellco Glass, 7715-45585, Roller Bottle, 110 x 570mm with GL45 Blue PP Cap

Bellco Glass, 7802-11115, Bioreactor Pitch Blade System 10L-RH 10L low speed system for mammalian cell culture takes low speed motor and one speed control box for each vessel.

Bellco Glass, 7803-31450, BJC DO Cable, Length 6 ft

Bellco Glass, 7805-11112, CellTrol Bioreactor Single Control System and Foam, 2 Pumps The CellTrol II Bioreactor Control system may be configured with and without speed capability and in single or dual operating systems. The control system consists of an Allen Bradley Micrologix 1500 programmable Logic Controller (PLC) and an Allen Bradley HMI (Human-Machine Interface) Operator Interface. The control cabinet contains the PLC, HMI, probe signal conditioning transmitters, 115VAC control outlets and fixed rate pumps. The CellTrol II can be configured to accept a variety of analog probe signals from a cell culture vessel. Standard signals include pH, dissolved oxygen, temperature, weight, redox and tachometer feedback from the agitator. A digital input signal from a level probe can be used for antifoam addition for level control.

Bellco Glass, 7808-21225, Easyferm+ K8 DO / pH Probe, 12 x 225 mm. Dissolved oxygen (DO) and pH electrodes are the "eyes and ears" for many biotechnology processes. High quality sensors are required for critical measurement and Hamilton sensors are some of the finest in the world. Bellco offers Hamilton gel-filled pH and stainless steel polarographic dissolved oxygen sensors.

Bellco Glass, 7909-00009, Angled Harvest Pipe Assembly for 3L Bioreactor Vessel SST 12 mm. O.D. harvesting pipe with 90º angle for sampling contents in 3L bioreactor vessel. Fits 18 mm. port on 3L metric headplate.

Bellco Glass, 7909-15089, 15L Thermowell Pipe Assembly

Bellco Glass, 7910-02026, Large Nylon Mesh, 23 x 23 cm <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 5 pcs </td> </tr> </table>

Bellco Glass, 9005-70000, Preventive Maintenance Kit for 7764-70000 Standard Overhead Drive Adapter

Benchmark Scientific, B3000-1000, Hybex Media Storage Bottle, 1000ml with Standard (gl45) Blue Cap Hybex Glass Media Storage Bottles are manufactured from high quality, borosilicate 3.3 glass. With their superior chemical resistance, these bottles are ideal for storage of reagents, culture media, biological fluids and a variety of other aqueous and nonaqueous solutions.A low coefficient of thermal expansion (3.3), provides temperature resistance that is far superior to that of standard lab glass (or soda lime glass). hybex glass can withstand temperatures from -70 to 500°C, permitting repeated use in freezers, microwaves, autoclaves and dry heat sterilization chambers.Each bottle has easy to read, permanent graduations and a large labeling area.The 1000ml hybex media bottles include a drip-free sealing ring as well as a standard blue polypropylene (GL45) sealing cap. <table cellspacing="1" cellpadding="2" border="0" width="100%" class="dataTable"><tr><td>Unit of Measure </td> <td>Pack of 10 pcs </td> </tr> </table>

Benchmark Scientific, BV1000-H500, Optional Attachment Head Horizontal for 2 x 50ml

Benchmark Scientific, C2000-DWMP, Optional Rotor with Carriers, 2 x Deep Well Plates up to 35mm Tall <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 2 pcs </td> </tr> </table>

Benchmark Scientific, H5000-1232, Block, 24 x 2ml HPLC, Autosampler Vials (12 x 32mm)

Beta Tools, 000420306, 42INOX 6mm x 6mm Stainless Steel Open and Offset Ring Ends Combination Wrench Features: <ul><li>Open and offset ring ends. </li> <li>Made of stainless steel. </li> <li>Compact heads. </li> <li>High resistance to corrosion. </li> <li>Outstanding mechanical characteristics. </li> </ul>

Beta Tools, 000950306, 95FTX Double-Ended Straight Wrench for Torx Head Screws

Beta Tools, 009200888, 920M/R55 Rotating Mechanism for 920M/55 and 920/56 Ratchets Features: <ul><li>Items 920M/55 and 920/56. </li> <li>1/2" driver size. </li> </ul>

Beta Tools, 009200894, 920M/56 1/2" Drive Reversible Swivel Ratchet with Metal Handle

Beta Tools, 009520269, 952AS 3/4" T-Handle Wrench with Swivelling Hexagon Socket

Beta Tools, 011680036, 1168BM 160mm Extra Long Bent Needle Knurled Nose Plier with Bi-Material Handles Features: <ul><li>Extra long bent needle knurled nose. </li> <li>With bi-material handles. </li> <li>ISO 5745. </li> </ul>

Beta Tools, 012640206, BetaGrip 1264L 0.6mm x 3mm x 300mm Screwdriver for Headless Slotted Screws, Long Series Features: <ul><li>Headless slotted. </li> <li>Long series. </li> </ul>

Beta Tools, 017080008, 1708/8 0.05mm Min - 0.5mm Max Metric Feeler Gauge, Set of 8 Blades <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Set of 8 pcs </td> </tr> </table>

Beta Tools, 017770026, 1777MQ/C 190mm Cable Stripping Knife for Multicore Cables with Insulated Handle, 1000V >> 017770026 by Beta Tools >> 017770026 by Beta Tools

BHx7/64x3-1/2, Bit, Ball , 7/64", 3-12" Long, 1/4" Drive

Big Horn 19717B-5PK 4 Point Knob Thread 5/16-18. Used in featherboards jig making kits. Features: <ul><li>4 Point Knob </li> <li>Thread 5/16-18 </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 5 pcs </td> </tr> </table>

BIGSigns 18" x 24" Accu-Shield Sign: "Exit" For unmatched reliability in performance under extreme conditions choose Accu-Shield™ ! Accu-Shield™ is the highest performance sign with an extra-long 15-year outdoor durability guarantee. The non-glare poly-carbonate plastic is specially formulated to resist color change, chemicals, corrosion, and abrasions and will continue to look good for years while maintaining its superior strength. The two-ply, heavy-duty construction provides a rugged yet stylish appearance with a thick-edge design and industrial-strength backing. The legend and message are reverse-printed with UV resistant inks on the underside of the clear poly-carbonate. This sub-surface image is sealed with further protection on the backside by a permanently bonded, laminate poly sheet. A composite sign, nearly 1/4" thick, will not crack, chip, or become brittle under extreme environments indoors and outdoors with service temperature range for poly-carbonate at -60° to 260°F. and under layer surface -40° to 176°F.

BIGSigns 24" x 36" Plastic Sign: "First Aid" Inform all readers of the location of a first aid station in a workplace or facility. Plastic (VP) Plastic combines standard, reliable performance with 92% recycled content to create a dependable, Earth-friendly material solution. Semi-flexible, impact-resistant plastic signs are ideal for standard-duty use for installation indoors and for protected, short-term outdoor applications. Get the look, feel and characteristics of non-recycled plastic signs in an environmentally friendly version.

Black Box, ACX310FIA-R2, EC KVM Fiber Extender Kit DVI-D, USB, Audio, Dual-Access Includes: <ul><li>(1) Transmitter </li> <li>(1) Receiver </li> <li>(1) DVI-D M/M cable </li> <li>(1) DVI to VGA M/M cable </li> <li>(1) USB Type A to B cable </li> <li>(2) 12-VDC Power Supplies with US, UK, EU and AU power clip </li> <li>(2) packs of 4 rubber feet </li> <li>(2) packs of self adhesive velcro strips </li> </ul> Features: <ul><li>Extends lossless digital video up to 1640 feet (500 m) over 50-micron multimode fiber cable. </li> <li>Provides full HD 1080p resolutions up to 1900 x 1200 at 60 Hz. </li> <li>Extends VGA/DVI-I input video with DVI-D output, plus bi-directional analog audio. </li> <li>Supports USB keyboard, monitors, touchscreens and other USB HID devices. </li> <li>Provides local monitoring. </li> <li>Plug-and-play installation with DDC /EDID reading. </li> </ul>

Black Box, EFE052-001M, Premium OM2 50/125 Multimode Fiber Optic Patch Cable, LSZH, 1 m

Black Box, EVN530-FF-05, RS530 Data Cable, 25-Pin, Pinning 1-25, Female/Female, 5 Ft

Black Box, FOCMP10-LCLC-AQ-5, OM3 50/125 Multimode Fiber Optic Patch Cable, OFNP Plenum, LC-LC, Aqua, 5 Ft

Black Box, FOCMPSM030MLCLCBK, OS2 9/125 Singlemode Fiber Optic Patch Cable, OFNP Plenum, Black, LC-LC, 30 m Features: <ul><li>High performance at data rates up to 1 Gbps at 850 nm. </li> <li>Higher data aggregation in the backbone, riser, and high-speed parallel interconnects (HSPIs). </li> <li>Full compatibility with a broad range of laser-based and legacy protocols and applications. </li> <li>Industry-leading CPC® coatings for superior micro-bend and environmental performance. </li> </ul>

Black Box, FOCMRM4-LCLC-AQ-200, OM4 50/125 Multimode Fiber Optic Patch Cable, OFNR PVC, Aqua, LC-LC, 200 Ft Features: <ul><li>10-Gbps compliant per IEEE 802.3ae. </li> <li>Provides an upgrade path from 10-Gbps to 40-Gbps and beyond. </li> <li>Use with 850-nm VCSELs and LED laser light sources. </li> <li>Backwards compatible with OM1, OM2, and OM3 cable. </li> </ul>

Black Box, FOCMRSM-STLC-YL-24, OS2 9/125 Singlemode Fiber Optic Patch Cable, OFNR PVC, Yellow, ST-LC, 24 Ft Features: <ul><li>High performance at data rates up to 1 Gbps at 850 nm. </li> <li>Higher data aggregation in the backbone, riser, and high-speed parallel interconnects (HSPIs). </li> <li>Full compatibility with a broad range of laser-based and legacy protocols and applications. </li> <li>Industry-leading CPC coatings for superior micro-bend and environmental performance. </li> </ul>

Black Box, FOCMRSM007MSTLCYL, OS2 9/125 Singlemode Fiber Optic Patch Cable, OFNR PVC, ST-LC, Yellow, 7 m Features: <ul><li>High performance at data rates up to 1 Gbps at 850 nm. </li> <li>Higher data aggregation in the backbone, riser, and high-speed parallel interconnects (HSPIs). </li> <li>Full compatibility with a broad range of laser-based and legacy protocols and applications. </li> <li>Industry-leading CPC coatings for superior micro-bend and environmental performance. </li> </ul>

BlackBox, C6APC80S-BK-200, CAT6A 650-MHz Locking Snagless Stranded Ethernet Patch Cable - Shielded (U/FTP), CM PVC (RJ45 M/M), Black, 200 ft. Features: <ul><li>Choose between two levels of lockability or use as a standard snagless connector </li> <li>Shielded CAT6A cable protects against EMI/RFI interference </li> <li>Tested to 650 MHz, surpassing 500-MHz CAT6A industry standard </li> <li>Cabling ETL verified to ANSI/TIA-568-C2 </li> <li>50-micron gold-plated contacts provide superior conductivity </li> <li>Connector designed for an insertion and extraction life of 750 cycles </li> <li>Offers superior near-end crosstalk (NEXT) compared to standard CAT6A cable </li> <li>Snagless boots prevent connector damage due to snags during installation </li> </ul> Black Box GigaTrue 3 Premium CAT6A Shielded Patch Cables feature a secure, lockable design. They exceed ANSI/TIA industry standards and protect against EMI/RFI interference that can distort or destroy data. Tested to 650-MHz and 10-Gbps performance, these cables ensure the transmission of voice, data, audio/video, and PoE signals in bandwidth-intensive 10G networking applications. They feature plugs with 50-micron gold-plated contacts for superior conductivity. These cables have connectors designed for an insertion and extraction life of 750 cycles, making for an ultra-reliable solution that can count on to perform. The rugged, hard-polymer LockPORT boot and plug are integrated to provide increased strength in comparison to standard connectors. These cables allow to lock down critical network ports when required - without buyingpatch cords. Secure net work ports by inserting a locking pin (sold separately) into the built-in locking tab on the patented snag less boot. To unplug the cable, release it with the removal key (sold separately). Locked: Red Pin Prevent unauthorized access to mission-critical and publicly accessible ports in government offices, lobbies, retail establishments, and more. To lock a port, insert the red locking pin into the patented LockPORT boot on the cable. Unlock the port with the LockPORT Locking Pin Removal Tool. Secured: Green Pin Prevent accidental disconnects in the office, manufacturing and industrial applications, and more. To secure a port, insert the green locking pin into the cable's LockPORT boot. To release the pin, squeeze its butterfly tabs and pull - no removal tool required.

BlackBox, CAT6PC-B-003-YL, CAT6 Ethernet Patch Cable, NB,Yellow,3ft Features: <ul><li>Basic cable that meets or exceeds industry standards. </li> <li>250-MHz </li> <li>26-AWG stranded conductors. </li> <li>Basic connectors. </li> <li>Flash gold contacts. </li> <li>PVC jacket. </li> </ul>

BlackBox, EDN12H-0010-MF, DB9 Extension Cable with EMI/RFI Hoods, Beige, Male/Female, 10-ft. (3.0-m) Our most popular cable for serial connections. Features: <ul><li>Use to connect any serial device, such as printers and terminals. </li> <li>Features a 100% aluminum foil shield for noise protection. </li> <li>Guaranteed for life! </li> <li>Metal EMI/RFI hoods are removable for repinning. </li> <li>Use this top-quality cable for dependable, long-lasting connections.<li>Heavy-duty construction. </li> </ul>