Attribute Values: Other

& Safety Glasses
'-40-140 ??F
'-40-465 ??F
'Blue/Gum'
'INOV-8'
°C Positions
± (0,15 + 0,2% o.Mv.) K
± 0.5mm
± 3-2-3% FS
±.00025" (.01mm)
±.001"/.02mm
±.013mm
±.03mm
±0.01 pH
±0.01°
±0.02% FS/°F. (includes zero and span)
±0.02°
±0.025% of Full Scale
±0.04%
±0.05%F.S.
±0.05%F.S. 3 min
±0.05%F.S./10°C
±0.07°
±0.1%
±0.10% full scale ±1 digit
±0.13°
±0.14ppm
±0.2%
±0.25 dB
±0.25% full scale (includes linearity, hysteresis, repeatability)
±0.25% of scale reading
±0.3nH
±0.5 %
±0.5 F.S
±0.5%
±0.5% FS
±0.5%/yr
±0.5°C
±0.5mV/V
±0.75°C
±1%
±1% of FS
±1% of full operating range
±1.5%
±1.5% FS
±1.5% full scale
±10%
±100ppm
±100ppm/°C
±10ppm
±10ppm/°C
±12 V ~ 15 V
±15%
±15ppm/°C
±16V
±1LSB
±2 minutes
±2%
±2% of FS at 70°F
±2% of FS at 70°F (21.1°C)
±2.0%F.S./10°C
±2.5ppm
±2.5V, 0V to 5V
±20
±20%
±200ppm/°C
±20ppm
±20V
±25ppm
±25ppm/°C
±3%
±3% of FS at 70°F (21.1°C)
±30%
±30ppm
±30V
±350ppm/°C
±4.4%
±40 ppm + 3% of reading (CO2); ±2% (RH)
±5%
±5% FS at 70 °F (21.1 °C) and 14.7 PSIA (1 atm absolute)
±5% of F.S
±500mA
±50ppm
±5V dc
±6%
±75ppm/°C
±8 ppm / °C at 1100 ppm
±8 ppm/ °C at 1100 ppm
µDFN-6
Ø mm
​Spiral Type: Single Spiral; Grit Number: 600; Brush Diameter: 0.2380"; Brush Length: 1"; Overall Length: 3"; Mount Type: Twisted Wire Stem; Stem Diameter: 0.0970"; Abrasive Material: Aluminum Oxide
​The J-29116-A is used to allow correct injector body to follow height settings on electronic unit injector. ​This tool works on Detroit Diesel Series 60 applications
ø 115 mm
'Tight-Squeeze' one-handed Hi-Lok® installation assembly with 5/64'' (.062) hex-key and 5/32'' (.187) hex socket. Ideal for non-interference fit fasteners.
-10° F to +125° F
-20°F to +140°F (-28°C to +60°C)
-22°F to +130°F
-4 to 176
< 5 mio. cell/mL
@ +20°C, 120 Hz