CategoryL4: Indexable Toolholders

Products with this attribute (161 total)

<ul><li>?HHIP MSRNR 12-3B Turning Tool Holder - New Rigid Clamp Design </li><li>?15 Degree lead angle</li><li>?Right hand</li><li>?Zero degree relief</li><li>?Use with SNMA, SNMG, or SNMM 32 inserts</li><li>?New rigid style top & hole clamping design provides increased stability & security for productive turning of large components and heavy machining.</li><li>?Shim is #2100-0905.</li><li>?Shim screw is #2100-4300.</li><li>?Clamp is #2100-2901.</li><li>?Please see the diagram for size information.</li></ul>

Band-It 080-J02069 20020 Pok-It Ii Tool

Boring Bar Holder, 590.02, Overall Length 113.00mm

Cut-Off and Grooving Blade, Left Hand, High Speed Steel, ANSI Code WGCM65L0816MC, Coolant Fed Coolant Through, Cutting Application Chamfering, Cut-Off, Facing, Grooving, Outside Diameter Deep Grooving, Profiling, Cutting Height 28.76 mm

Grooving/Parting Toolholder,WMT,LH

Heavy Duty Shrink Fit Chck,40mm Hole Dia

HSK50A SHRINK FIT ADAPTER GENERAL APPLIC

Indexable Grooving and Parting Toolholder, NOVEX-CUT External Positive, Insert Style SX, Left Hand, Grooving, Shank Width 1 in, ANSI Code G2012.16L-5T40SX-P, Center to Cutting Tip 23.25mm, Compatible Hardware 1/8 in Threaded Plug FS2258; Insert Mounting Wrench FS1494, Coolant Fed Coolant Through

Indexable Grooving and Parting Toolholder, NOVEX-CUT External Positive, Insert Style SX, Left Hand, Grooving, Shank Width 5/8 in, ANSI Code G2012.10L-3T16SX-P, Center to Cutting Tip 14.65mm, Compatible Hardware 1/8 in Threaded Plug FS2258; Insert Mounting Wrench FS2249, Coolant Fed Coolant Through

Indexable Thread Turning Tool Holder, Axial Single, PSK 80, Cutting Direction Left Hand, Shank PSK 80, Shank Width 32.00mm, Shank Height 32.00mm, Overall Length 173.00mm

Indexable Thread Turning Tool Holder, Cutting Direction Right Hand, Rake 0 Degrees Axial, 0 Degrees Radial, Shank Width 20.00mm, Shank Height 20.00mm, Overall Length 125.00mm

Indexable Thread Turning Tool Holder, Cutting Direction Right Hand, Rake 3 Degrees Axial, Shank Width 1-1/4 in, Shank Height 1-1/4 in, Overall Length 6 in

Indexable Thread Turning Tool Holder, Neutral, Cut-Off, Shank Width 18.00mm, ANSI Code 12251222000, Coolant Fed Non-Coolant Through

Indexable Turning Toolholder

Indexable Turning Toolholder, CTGP, Insert Style TPG., Overall Length 4-1/2 in

Indexable Turning Toolholder, DCLN, Insert Style CN, Overall Length 6 in

Indexable Turning Toolholder, MCKN, Insert Style CNM., Overall Length 6 in

Indexable Turning Toolholder, MCLN, Insert Style CNM., Overall Length 6 in

Indexable Turning Toolholder, MCLN, Insert Style CNM., Overall Length 7 in

Indexable Turning Toolholder, MDJN, Insert Style DNM., Overall Length 5 in

Indexable Turning Toolholder, MDPN, Insert Style DNM., Overall Length 6 in

Indexable Turning Toolholder, MSRN, Insert Style SNM., Overall Length 7 in

Indexable Turning Toolholder, MTJN, Insert Style TNM., Overall Length 4 in

Indexable Turning Toolholder, MTJN, Insert Style TNM., Overall Length 6 in

Indexable Turning Toolholder, MVJN, Insert Style VNM., Overall Length 5 in

Indexable Turning Toolholder, MVTN, Insert Style VNM., Overall Length 6 in

Indexable Turning Toolholder, STNC, Insert Style TCMT, Overall Length 4-1/2 in

Internal Grooving Toolholder, KGDIR 3225B3

KTKFR 82516JCT

LulzBot Wiper Replacement Kit, 5PK

Mini Shrink Chuck,8mm Hole Dia.,HSK40E

Power Mini Shrink Chuck,12mm Hole Dia.

Power Shrink Chuck,18mm Hole Dia.,HSK63A

Power Shrink Chuck,5/8 in. Hole Dia.

Quick Change, Star SR20-RIV Holder,0.3125" (5/16) Bore dia

Reduction Sleeve,12 to 6mm Dia. Range

Shrink Chuck,10mm Hole Dia.,BT30

Shrink Chuck,20mm Hole Dia.,BT40

Shrink Chuck,20mm Hole Dia.,BT50

Shrink Chuck,3/8 in. Hole Dia.,BT30

Shrink Extension,20 to 6mm Dia. Range

Shrink Extension,25 to 10mm Dia. Range

Shrink Fit Chuck,16mm Hole Dia.,BT50

Shrink Fit Ext,16mm Shank,4mm Shrink

Shrink Fit Ext,20mm Shank,8mm Shrink

Shrink Fit Ext,5/8in Shank,1/4in Shrink

Shrink Fit Holder,14mm Hole Dia.,SK40

Shrink Fit Holder,BT40,3/4in,6.30in Proj

Shrink Fit Holder,CAT40,3/8in,6.30inProj

Shrink Fit Tool Holder, Hole Dia. 1 in, Taper Size HSK100A, Shank Dia. 1 in, Projection 6.3000 in, Nose Dia. 1.7300 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1 in, Taper Size HSK63A, Projection 3.3500 in, Nose Dia. 1.7700 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 1 in, Taper Size HSK63A, Shank Dia. 1 in, Projection 4.5300 in, Nose Dia. 1.7300 in, Coolant Fed Coolant Through, Balanced to RPM 24,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1-1/4 in, Taper Size BT40, Projection 5.1200 in, Nose Dia. 1.7300 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1-1/4 in, Taper Size CV50, Shank Dia. 1-1/4 in, Projection 5.1200 in, Nose Dia. 1.7300 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1-1/4 in, Taper Size HSK100A, Shank Dia. 1-1/4 in, Projection 4.7200 in, Nose Dia. 1.7300 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/2 in, Taper Size CV50, Shank Dia. 1/2 in, Projection 5.1200 in, Nose Dia. 0.9400 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/2 in, Taper Size CV50, Shank Dia. 1/2 in, Projection 6.3000 in, Nose Dia. 0.9400 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/2 in, Taper Size HSK100A, Projection 7.8700 in, Nose Dia. 1.0600 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size BT40, Shank Dia. 1/4 in, Projection 3.5400 in, Nose Dia. 0.7900 in, Coolant Fed Coolant Through, Balanced to RPM 20,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size CV50, Shank Dia. 1/4 in, Projection 5.1200 in, Nose Dia. 0.8300 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size CV50, Shank Dia. 1/4 in, Projection 6.3000 in, Nose Dia. 0.8300 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size HSK100A, Projection 7.8700 in, Nose Dia. 53/64 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size HSK40E, Projection 2.7600 in, Nose Dia. 0.4700 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size HSK63A, Shank Dia. 1/4 in, Projection 4.7200 in, Nose Dia. 0.7900 in, Coolant Fed Coolant Through, Balanced to RPM 24,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/8 in, Shank Dia. 5/8 in, Nose Dia. 0.2400 in, For Use With Shrink Fit Holders

Shrink Fit Tool Holder, Hole Dia. 1/8 in, Taper Size BT30, Shank Dia. 1/8 in, Projection 3.1500 in, Nose Dia. 0.3900 in, Coolant Fed Coolant Through, Balanced to RPM 30,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size BT30, Projection 80.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size BT40, Projection 130.00 mm, Nose Dia. 16.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK100A, Projection 130.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK100A, Projection 160.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK63A, Projection 80.00 mm, Nose Dia. 13.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK63A, Shank Dia. 10mm, Projection 160.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 24,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size PSK63, Shank Dia. 10mm, Projection 160.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, For Use With Cutting Tools

Shrink Fit Tool Holder, Hole Dia. 12.00mm, Taper Size BT50, Projection 200.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 12.00mm, Taper Size HSK125A, Projection 160.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 12.00mm, Taper Size SK40, Projection 130.00 mm, Nose Dia. 15.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size BT40, Projection 75.00 mm, Nose Dia. 29.50mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size CV50, Projection 160.00 mm, Nose Dia. 33.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size HSK100A, Projection 130.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size HSK63, Shank Dia. 14mm, Projection 80.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, For Use With Cutting Tools

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size HSK63A, Projection 90.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size CV50, Shank Dia. 16mm, Projection 60.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size HSK100A, Projection 160.00 mm, Nose Dia. 51.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size HSK63A, Projection 75.00 mm, Nose Dia. 29.50mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size KM4X, Projection 100.00 mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size PSK63, Shank Dia. 16mm, Projection 160.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, For Use With Cutting Tools

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size SK40, Projection 130.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size SK40, Projection 200.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size SK50, Projection 80.00 mm, Nose Dia. 33.30mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 18.00mm, Taper Size BT40, Projection 90.00 mm, Nose Dia. 33.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools