Neutrik Americas Products (Page 5)

Pin crimping: 1.6 mm Shield and jacket: HEX crimp 5.41mm (A), 4.53mm (B) PLEASE NOTE; The Neutrik HX-BNC CrimpTool has been discontinued and is no longer available. The Dies are still available for this tool!

Pin crimping: 1.6 mm Shield and jacket: HEX crimp 6.47 mm (A), 5.00 mm (B)Crimp size 5.00, 6.47 Hex crimp (shield) acc. MIL22520/5-43(B), IEC 60803 (die designation E) Crimp size 1,6 Square crimp (pin) acc. IEC 60803 (die designation 2)PLEASE NOTE; The Neutrik HX-BNC CrimpTool has been discontinued and is no longer available. The Dies are still available for this tool!

Pin crimping: 1.60 mm Shield and jacket: HEX crimp 6.47 mm (A), 8.23 mm (B)

Pin crimping: 1.60 mm Shield and jacket: HEX crimp 7.36 mm (A), 5.0 mm (B)

Precision Machined & Super Heavy Duty, the Profi RCA series are the ideal audiophile's choice when making a connector decision. The unique design makes ground before signal contact & breaks signal before ground so more disturbing noises & broken speaker cones. Precisely machined to Neutrik's demanding quality standards. Also features hard plated gold contacts and Neutrik's unique chuck type strain re with Spring Loaded Ground Contact. The retracting element with separate wedge contacts always keep the shell in the front position.

Professional audio transformer with free wires.Audio transformer 1:4Impedance ratio: 200:3.2kSource/load impedance in Ohm: 200/10kMax. Input level (@ 50 Hz, 1% THD): -7 dBuApplications: mic input step-up

Professional locking 1/4" cable jack for secure in-line connections. Nickel housing, silver contacts, excellent cable protectionThe 3 pole phone cable jack in-line version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab.

Professional long-frame connector phone plugs in MIL type design according MIL standard MIL-P-642/*. They are featuring similar construction as the standard Neutrik phone plugs with chuck type strain relief and slimline metal barrel to meet the high requirements for military communication equipments. These plugs are not compatible with standard 1/4" jacks (acc. EIA RS453) and patch panels.

Professional longframe connector phone plug according B-Gauge standard BPO316. Featuring similar construction as the standard Neutrik phone plugs with chuck type strain relief and slimline metal barrel. These plugs are not compatible with standard 1/4" longframe connector jacks (acc. EIA RS453) and patch panels.

Professional phone plug with robust metal shell and chuck type strain relief.

Quick Cap Fixing System drastically reduces assembly time with use of snap on mounting cap. The retention force is provided by a special spring element, independent from contacts. All common circuits available. Two versions for mating of plugs acc. to EIA RS 453 or MIL-P-642/2.NJ5FD-V: 2 x switching (normalling) Stereo Jack (T/TN/R/RN/S). NJ6FD-V: 3 x switching (normalling) Stereo Jack (T/TN/R/RN/S/SN).

Rack panel, angled 30 degrees, 19 " 1RU, accepts up to 12 Neutrik D-shape chassis connectors (not included); Black. The angled 19" panel for racks in demanding environments protects the installed receptacles well against the ingress of dirt and water. The panel is 30° forward-turned and offers 12 D-shape cut-outs with M3 threaded fastening holes.

Receptacle speakONr 4 pole - PCBV 4 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

Receptacle speakONr 4 pole - square flange - screw terminals. 4 pole chassis connector, black D-size flange, countersunk thru holes, screw termination. This chassis connector is not airtight. The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

Receptacle speakONr 4 pole - square flange - upper current. 4 pole chassis connector for 40 A rms continuous, 50 A audiosignal duty cycle 50%. Black D-size flange, countersunk thru holes, 1/4" flat tabs (termination e.g. with Faston tab Tyco part # 41829) The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

Reversible USB 3.0 gender changer (type A and B), black D-housing The NAUSB3-B is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector.

Reversible USB 3.0 gender changer (type A and B), Nickel D-housing The NAUSB3-W is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector.

Right angle RJ45 feedthrough receptacle, black D-shape metal flange with latch lock. Mounting screws included. The etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry. The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market. Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

RJ45 feedthrough receptacle, black D-shape metal flange with the latch lock, mounting screws included. The etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry. The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market. Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S cables.

Rubber coated pollutant-protection cover for opticalCON cable connectors including front housing. Due to the innovative design, the ergonomic rubber boot can be safely locked with the spring loaded push/pull mechanism of the cable connector front and protects the fiber ferrules of any contamination especially during spooling of cables.It can be mated with the chassis cover to keep the interior clean.

Rugged lockable metal sealing cover for opticalCON DRAGONFLY male cable connector.Fiber applications like drop down or stage boxes as well as outdoor devices require additional protection of the opticalCON DRAGONFLY cable connectors. The sealing cover encircles the entire lens ferrule and protects the interior completely from pollutant and ingress of water.When the connectors are mated, the sealing cover can be put together with the chassis connector cover to keep the interior clean.

Rugged metal sealing cover for opticalCON DRAGONFLY female cable connector.Fiber applications like drop down or stage boxes as well as outdoor devices require additional protection of the opticalCON DRAGONFLY cable connectors. The sealing cover encircles the entire lens ferrule and protects the interior completely from pollutant and ingress of water.When the connectors are mated, the sealing cover can be put together with the chassis connector cover to keep the interior clean.

Rugged rubber sealing cover for opticalCON chassis connectors Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of water. It can be mated with the cable connector cover to keep the interior clean.

Rugged sealing cover for opticalCON chassis connectors Fiber applications as drop down or stage boxes and certain outdoor devices require an additional protection of the opticalCON chassis connectors. The sealing dust cover encloses the entire shutter group and completely protects the interior from pollutant and ingress of water. It can be mated with the cable connector cover to keep the interior clean.

Sealing cover for powerCON TRUE1 duplex chassis connector

Self Tapping TAPTITE Screw M2.5 DIN 7500 for B-Series, panhead

Set of strain relief crimp version consisting of crimp ferrule and two reduction ferrules for various cable diameters Special crimp type strain relief establishes an ideal coaxial connection of the cable shield to the connector shell for best EMC shielding. For cable OD: 2.5 - 3.2 mm, 3.3 - 4.4 mm and 4.5 - 6.0 mm HEX Size/Standard: 6.47 mm / IEC 803 The modular system of the miniCON series offers the possibility to assemble a desired connector from a wide range of various parts. Including additional parts for special versions (e.g. cable connector extension, crimp set, ...). The miniCON with its flexible and compact design is perfectly suitable for multipin/industrial applications. The rugged all metal miniature connector offers a push-pull locking device and stands out by an excellent cost/performance ratio.

Single Gang dual stainless wallplate with two Neutrik NC3MD-L-1 3-Pin XLRM Silver Chassis Mt. w/Solder Cups receptacles

Smallest available hard wiring large solder cups. 3 pole female receptacle, solder contacts, Nickel housing, silver contacts. Compatible with switchcraft D*M, D*F; Cannon XLB2*31, XLB2*32

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring. 3 pole female receptacle, solder contacts, black metal housing, gold contacts.Compatible with switchcraft D*M, D*F; Cannon XLB2*31, XLB2*32.

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring. 3 pole female receptacle, solder contacts, black metal housing, silver contacts. Compatible with Switchcraft D*M, D*F; Cannon XLB2*31, XLB2*32

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring. 3 pole male receptacle, solder contacts, black metal housing, gold contacts. Smallest available hard wiring receptacles with large solder cups. Compatible with Switchcraft D*M, D*F; Cannon XLB2*31, XLB2*32.

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring. 3 pole male receptacle, solder contacts, black metal housing, silver contacts. Smallest available hard wiring receptacles with large solder cups. Compatible with Switchcraft D*M, D*F; Cannon XLB2*31, XLB2*32.

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring. 3 pole male receptacle, solder contacts, Nickel housing, silver contacts.

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring. NC5FP-15 pole female receptacle, solder contacts, Nickel housing, Silver Contacts. NC5MP5 pole male, solder contacts, Nickel housing, Silver Contacts. NC5FP-B 5 pole female, solder contacts, black metal housing, Gold Contacts.

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring. NC5FP-15 pole female receptacle, solder contacts, Nickel housing, Silver Contacts. NC5MP5 pole male, solder contacts, Nickel housing, Silver Contacts. NC5FP-B5 pole female, solder contacts, black metal housing, Gold Contacts.

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.5 pole female receptacle, solder contacts, black metal housing, gold contacts

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.5 pole male receptacle, solder contacts, black metal housing, silver contacts

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.6 pole female receptacle, solder contacts, Nickel housing, silver contacts

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.7 pole female receptacle, solder contacts, Nickel housing, silver contacts

Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.NC5FP-15 pole female receptacle, solder contacts, Nickel housing, Silver Contacts.NC5MP5 pole male, solder contacts, Nickel housing, Silver Contacts.NC5FP-B5 pole female, solder contacts, black metal housing, Gold Contacts.

Soft plastic cover for the rear end of several D-size chassis connectors. It is used to protect the gap between connector and cable. The protection cover works with all common wires and cables - you simply cut off the cover end to the preferred diameter.

speakON Combo - mono jack - PCBH - 1+ to tip, 1- to sleeve, mates with all 2- and 4-pole speakON cable connectors. 2 pole combination of speakON socket and 1/4" jack receptacle, horizontal pcb mount, same pcb footprint and panel cut out as NL4MD-H First speakON / jack hybrid panel mount connector combining the speakON chassis connector with a 1/4" 2 pole jack socket permitting connection using either type of plug. The speakON Combo mates with all 2- and 4-pole speakON cable connectors and 1/4" jack plugs utilizing 2 contacts.

SpeakON Combo - mono jack - PCBV - 1+ to tip, 1- to sleeve, mates with all 2- and 4-pole speakON cable connectors. 2 pole combination of speakON socket and 1/4" jack receptacle, vertical pcb mount, same pcb footprint and panel cut out as NL4MD-V First speakON / jack hybrid panel mount connector combining the speakON chassis connector with a 1/4" 2 pole jack socket permitting connection using either type of plug. The speakON Combo mates with all 2- and 4-pole speakON cable connectors and 1/4" jack plugs utilizing 2 contacts.

Standard bushing for the Push-Pull BNC`s

Standard bushing for the rearTWIST BNCs in black and 9 different colors available.

Stereo 1/4" plug module, inner thread M 17x1. Solderability: Complies with IEC 68-2-20

Stereo 1/4in Locking Jack to Stereo 1/4in Locking Jack TRS Pre-Wired Extension Adapter

Strain relief reduction ring for NL4FX for thin loudspeaker cables with an O.D. of 5 to 8 mm for best cable retention.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy die cast shell, fiberglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.7-Pin Female Cable Connector with Nickel Housing and Silver Contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fiberglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.3 pole male cable connector with black metal housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibre glass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.5 pole female cable connector with?Nickel housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibre glass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.5 pole male cable connector with black metal housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibre glass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.7 pole male cable connector with Nickel housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.3 pole male cable connector with Nickel housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.5 pole female cable connector with black metal housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.5 pole male cable connector with Nickel housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.7 pole male cable connector with black metal housing and gold contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.NC4FX-BAG -- 4 pole female cable connector with black metal housing and silver contacts.NC4MX-BAG -- 4 pole male cable connector with black metal housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.The Neutrik NC7FX-B is a 7 pole female cable connector with black metal housing and gold contacts.

The 1/4" stacking jack features highest board packing density as two jacks are in a single footprint and as they fit in 1 RU.

The 3 pole phone cable jack in-line version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab. The Neutrik NJ3FC6-B is a professional locking 1/4" cable jack for secure in-line connections. It features a black metal housing, silver contacts and provides excellent cable protection.

The 32 Amp PowerCon is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations. The connectors comprise of contacts for phase, neutral and protective earth (ground) conductors rated for currents up to 32 A and for voltages up to 250V.

The NE8FF etherCON RJ45 Feed-Through Coupler for Cable Extensions from Neutrik helps connect two cables together to extend the overall application. It features a secure latch lock system. The coupler can be used with all RJ45 plugs, including the NE8MC RJ45 cable connector.

The Neutrik LRX converts a standard 2 or 4 pole SPX speakON into a right angle cable connector, without removing the cable from the insert.

The Neutrik NYS-SPP-L1 is an economical and sleekly designed 1/4" modular Patch Panel. Each of its 48 PCB wired balanced channels, 24 front pairs and corresponding 24 rear pairs, can either be grounded separately or in groups of individually channel numbers of choice.The PCBs are held securely in place by being clamped between the front and the rear panel, this grants an easy reconfiguration of the Patch Panel without the danger of losing any small parts (e.g. nuts). The grey jack serves as an easy and distinguishable normalling identification.Configuration Standard configuration, when delivered, is Half Normalled bottom row. The configuration can easily be changed by just flipping the individual PCB. Inserting a plug into the grey jack will always isolate the top against the bottom row. Alternative solution for send/return applications by use of NYS-SPCR1 module.

The NPS-30W is Neutrik's answer to increasing demand for PoE injectors. It is the world's first PoE injector made for harsh stage conditions, with lockable power and network connectors. NPS-30W is a convenient companion for any PoE application, not just Neutrik's network products. Used for the unpowered data transmission between Gigabit PoE Supply and a network device.Note: Do not combine NPS-30W Gigabit PoE Supply with other PoE Supplies, as this can cause a damage to the powered device due to different pin assignment. When using 2 NPS-30W PoE Supplies, do not use cables with different connection standards (TIA568A vs TIA568B). Never use Ethernet Cross-cables within PoE connections.

The NPS-30W is Neutrik's answer to increasing demand for PoE injectors. It is the world's first PoE injector made for harsh stage conditions, with lockable power and network connectors. NPS-30W is a convenient companion for any PoE application, not just Neutrik's network products.Used for the unpowered data transmission between Gigabit PoE Supply and a network device.Note: Do not combine NPS-30W Gigabit PoE Supply with other PoE Supplies, as this can cause a damage to the powered device due to different pin assignment. When using 2 NPS-30W PoE Supplies, do not use cables with different connection standards (TIA568A vs TIA568B). Never use Ethernet Cross-cables within PoE connections.

The NAC3MX-W-TOP-D is a Bulk 50 pack of locking male cable connectors with screw terminals. The powerCON TRUE1 TOP is a locking 20 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The Neutrik X-TOP series is a "heavy-duty" XLR chassis connector for outdoor use. Super rugged, Outdoor protected by mating with related cable connector of the XLR TOP range (IP65 and UL50E). Gold contacts are standard

The FOCD-STD is a fiber optic cleaning service tool for opticalCON DUO. this device features an enhanced inspection and cleaning procedure and it's lockable with an opticalCON connecotr. the FOCD-STD is compatible with conventional cleaning and inspection equipment.

The NAC3FPX-ST-TOP powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3FPX-ST powerCON TRUE1 is a locking 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3FPX-TOP powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3FPX-WOT-TOP powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3FX-W-TOP-D is a 20 amp Locking female cable connector with screw terminals. The powerCON TRUE1 TOP is a locking 20 Amp true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3FX-W-TOP is a 20 amp Locking female cable connector with screw terminals. The powerCON TRUE1 True Outdoor Protection (TOP) is a locking 20 Amp true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 True Outdoor Protection (TOP) is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3MPX-TOP is a Male appliance inlet connector with 1/4" flat tab terminals. The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3MPX-WOT-TOP is an appliance inlet connector with 1/4" flat tab terminals, without insulation divider. The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3MX-W-TOP is a locking male cable connector with screw terminals. The powerCON TRUE1 True Outdoor Protection (TOP) is a locking 20 A (16A VDE) true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NAC3PX-TOP is an appliance Inlet-Outlet Combination with 1/4" flat tab terminals. The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

The NADB9FF-B is a 9 pole D-SUB feedthrough, female to female, black D-shape housing.

The NC3FXX-WOB is a 3 pole female cable connector with Nickel housing and silver contacts, without boot. Boot must be ordered separatly.The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.