Neutrik Americas Products (Page 6)

The NC3MXX-WOB is a 3 pole male cable connector, Nickel housing and silver contacts, without boot. Boot must be ordered separatly.The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

The NC6FP-B-1 is a 6 pole female receptacle, solder contacts, black metal housing, gold contacts. Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.

The NC6MXX is a 6 pole male cable connector with Nickel housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors, the successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

The NE8MX-B RJ45 cable connector carrier for pre-assembled RJ45 plugs consists of black chromium shell, bushing and boot. Packed with two cable protection elements for cable diameter either up to 5 mm or 8 mm. Cable connector carrier does not include a RJ45 plug. The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution. Please Note: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B. Also note! Cable connectors do not include RJ45 plug. RJ45 cable assembly must be provided by end user!

The NE8MX-TOP is a cable connector carrier that consists of a velour chromiuim shell, chuck and boot. The boot is suitable for cable diameters from 5 - 8 mm. For non pre-assembled cables only. Cable connector carrier does not include a RJ45 plug. The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, outdoor protected lockable solution (IP65 & UL50E). ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.Please note! Cable connectors do not include RJ45 plug. RJ45 cable assembly must be provided by end user!

The NE8MX is a cable connector carrier that consists of a velour chromiuim shell, chuck and boot. The boot is suitable for cable diameters from 5 - 8 mm. Cable connector carrier does not include a RJ45 plug. The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, outdoor protected lockable solution (IP65 & UL50E). ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.

The Neutrik NKO2M-L-0-3 is a 3 meter ( 9 feet, 9 inches), opticalCON DUO Multimode cable. This 2 channel fiber system features improved bending performance due to new fiber design, black matt outer jacket and is available in multi- and single-mode (PC or APC). Designed for temporary and permanent installations. Besides extreme applications there is also a demand for quality fiber connections for applications as e.g. patching, the interconnection of devices, or permanent installations. Such applications require a focus on costs and a sealing shutter is not required. The opticalCON DUO LITE offers high performance and a cost effective, compact, and light weight design. It is fully compatible with the standard opticalCON DUO chassis connector

The Neutrik NKO2S-XP-0-31 opticalCON DRAGONFLY is a pre-assembled female to male SMPTE Hybrid cable with 2 lensed single-mode ferrules and 4 copper pins. Using technology based on fiber lenses and fusion splicing, Neutrik's opticalCON DRAGONFLY fiber optic connector series offers advanced lens technology for the Broadcast and AV Market with a more robust, reliable and easier to maintain system than common SMPTE hybrid camera signal transmission systems.Expanded Beam Meets Broadcast & AV DRAGONFLY is based on the patented XB2- Technology. Its innovative fusion splice high performance lens transmits UHD 4K and 8K signals with very low loss as the signal surface of the XB2 lens is 322 times bigger than physical contact surfaces. This further results in low insensitivity against dust and dirt. An additional sealing cover is provided to protect lenses against dirt and dust.The DRAGONFLY connector offers long life with very low maintenance. It can also withstand harsh and demanding environments and is dust and moisture insensitive. Additionally, DRAGONFLY is robust against vibration and therefore has low potential for damage. And if there ever is a problem, DRAGONFLY is field repairable. With this new technology, DRAGONFLY provides a complete solution for the Broadcast and AV Market.The cable comes pre-assembled. Spare parts are available as single components. Suitable chassis connectors are NO2MW-XP and NO2FW-XP.

The Neutrik NKOBF2S-XP-0-1 opticalCON DRAGONFLY XB2 Female to LC Breakout Cable is designed to mate with DRAGONFLY chassis mount connectors and deliver a breakout to standard duplex LC connections. The opticalCON DRAGONFLY is more robust, reliable and easier to maintain than common hybrid camera signal transmission systems. Using technology based on fiber lenses and fusion splicing Neutrik's opticalCON DRAGONFLY achieves a extremely robust signal with minimal loss. An additional sealing cover is provided to protect lenses against dirt and dust.Expanded Beam Meets Broadcast & AV Neutrik's opticalCON DRAGONFLY fiber optic connector series offers advanced lens technology for the Broadcast and AV Market with a more robust, reliable and easier to maintain system than common SMPTE hybrid camera signal transmission systems. DRAGONFLY is based on the patented XB2- Technology. Its innovative fusion splice high performance lens transmits UHD 4K and 8K signals with very low loss as the signal surface of the XB2 lens is 322 times bigger than physical contact surfaces. This further results in low insensitivity against dust and dirt.The DRAGONFLY connector offers long life with very low maintenance. It can also withstand harsh and demanding environments and is dust and moisture insensitive. Additionally, DRAGONFLY is robust against vibration and therefore has low potential for damage. And if there ever is a problem, DRAGONFLY is field repairable. With this new technology, DRAGONFLY provides a complete solution for the Broadcast and AV Market.

The Neutrik NKOBM2S-XP-0-1 opticalCON DRAGONFLY XB2 Male to LC Breakout Cable is designed to mate with DRAGONFLY chassis mount connectors and deliver a breakout to standard duplex LC connections. The opticalCON DRAGONFLY is more robust, reliable and easier to maintain than common hybrid camera signal transmission systems. Using technology based on fiber lenses and fusion splicing Neutrik's opticalCON DRAGONFLY achieves a extremely robust signal with minimal loss. An additional sealing cover is provided to protect lenses against dirt and dust.Expanded Beam Meets Broadcast & AV Neutrik's opticalCON DRAGONFLY fiber optic connector series offers advanced lens technology for the Broadcast and AV Market with a more robust, reliable and easier to maintain system than common SMPTE hybrid camera signal transmission systems. DRAGONFLY is based on the patented XB2- Technology. Its innovative fusion splice high performance lens transmits UHD 4K and 8K signals with very low loss as the signal surface of the XB2 lens is 322 times bigger than physical contact surfaces. This further results in low insensitivity against dust and dirt.The DRAGONFLY connector offers long life with very low maintenance. It can also withstand harsh and demanding environments and is dust and moisture insensitive. Additionally, DRAGONFLY is robust against vibration and therefore has low potential for damage. And if there ever is a problem, DRAGONFLY is field repairable. With this new technology, DRAGONFLY provides a complete solution for the Broadcast and AV Market.

The Neutrik NKOP2S-XP-0-10 XB2 male to XB2 female patch cable is designed for patching between DRAGONFLY chassis connectors in studio and truck links behind racks and bays. Expanded Beam Meets Broadcast Neutrik's opticalCON DRAGONFLY fiber optic connector series offers advanced lens technology for the Broadcast and AV Market with a more robust, reliable and easier to maintain system than common SMPTE hybrid camera signal transmission systems. DRAGONFLY is based on the patented XB2- Technology. Its innovative fusion splice high performance lens transmits UHD 4K and 8K signals with very low loss as the signal surface of the XB2 lens is 322 times bigger than physical contact surfaces. This further results in low insensitivity against dust and dirt.The DRAGONFLY connector offers long life with very low maintenance. It can also withstand harsh and demanding environments and is dust and moisture insensitive. Additionally, DRAGONFLY is robust against vibration and therefore has low potential for damage. And if there ever is a problem, DRAGONFLY is field repairable. With this new technology, DRAGONFLY provides a complete solution for the Broadcast and AV Market.

The Neutrik NKOP2S-XP-0-20 XB2 male to XB2 female patch cable is designed for patching between DRAGONFLY chassis connectors in studio and truck links behind racks and bays. The opticalCON DRAGONFLY is more robust, reliable and easier to maintain than common hybrid camera signal transmission systems. Using technology based on fiber lenses and fusion splicing Neutrik's opticalCON DRAGONFLY achieves a extremely robust signal with minimal loss. An additional sealing cover is provided to protect lenses against dirt and dust.Expanded Beam Meets Broadcast & AV Neutrik's opticalCON DRAGONFLY fiber optic connector series offers advanced lens technology for the Broadcast and AV Market with a more robust, reliable and easier to maintain system than common SMPTE hybrid camera signal transmission systems. DRAGONFLY is based on the patented XB2- Technology. Its innovative fusion splice high performance lens transmits UHD 4K and 8K signals with very low loss as the signal surface of the XB2 lens is 322 times bigger than physical contact surfaces. This further results in low insensitivity against dust and dirt.The DRAGONFLY connector offers long life with very low maintenance. It can also withstand harsh and demanding environments and is dust and moisture insensitive. Additionally, DRAGONFLY is robust against vibration and therefore has low potential for damage. And if there ever is a problem, DRAGONFLY is field repairable. With this new technology, DRAGONFLY provides a complete solution for the Broadcast and AV Market.

The Neutrik NO2FW-XP female SMPTE Hybrid chassis connector with ruggedized anticorrosive plating, 4 crimp contacts, 1 XB2 feedthrough socket and 1 shell ground contact for SMPTE cable shield. Waterproof acc. to protection class IP68 in mated condition with sealing kit SCXP-F. The connector comes pre-assembled.The chassis connector acts as a feedthrough allowing simplified installations by connecting a XB2 patch cable on the rear. The chassis cut-out has the same size as common standard broadcast cut-outs and is therefore simple to integrate into existing systems. Additional dirt and dust protection: SCNO2FW-XP sealing cover.Expanded Beam Meets Broadcast & AV Neutrik's opticalCON DRAGONFLY fiber optic connector series offers advanced lens technology for the Broadcast and AV Market with a more robust, reliable and easier to maintain system than common SMPTE hybrid camera signal transmission systems. DRAGONFLY is based on the patented XB2- Technology. Its innovative fusion splice high performance lens transmits UHD 4K and 8K signals with very low loss as the signal surface of the XB2 lens is 322 times bigger than physical contact surfaces. This further results in low insensitivity against dust and dirt.The DRAGONFLY connector offers long life with very low maintenance. It can also withstand harsh and demanding environments and is dust and moisture insensitive. Additionally, DRAGONFLY is robust against vibration and therefore has low potential for damage. And if there ever is a problem, DRAGONFLY is field repairable. With this new technology, DRAGONFLY provides a complete solution for the Broadcast and AV Market.

The Neutrik NO2MW-XP opticalCON DRAGONFLY is a Male chassis connector with ruggedized anticorrosive plating, 4 crimp contacts, 1 XB2 feedthrough socket and 1 shell ground contact for SMPTE cable shield. Waterproof acc. to protection class IP68 in mated condition with sealing kit SCXP-M. The connector comes pre-assembled. The chassis connector acts as a feedthrough allowing simplified installations by connecting a XB2 patch cable on the rear. The chassis cut-out has the same size as common standard broadcast cut-outs and is therefore simple to integrate into existing systems. Additional lockable dirt and dust protection: SCNO2MW-XP sealing cover.Expanded Beam Meets Broadcast & AV Neutrik's opticalCON DRAGONFLY fiber optic connector series offers advanced lens technology for the Broadcast and AV Market with a more robust, reliable and easier to maintain system than common SMPTE hybrid camera signal transmission systems. DRAGONFLY is based on the patented XB2- Technology. Its innovative fusion splice high performance lens transmits UHD 4K and 8K signals with very low loss as the signal surface of the XB2 lens is 322 times bigger than physical contact surfaces. This further results in low insensitivity against dust and dirt.The DRAGONFLY connector offers long life with very low maintenance. It can also withstand harsh and demanding environments and is dust and moisture insensitive. Additionally, DRAGONFLY is robust against vibration and therefore has low potential for damage. And if there ever is a problem, DRAGONFLY is field repairable. With this new technology, DRAGONFLY provides a complete solution for the Broadcast and AV Market.

The NJ3FP6C is a locking 1/4" phone jack, D-size shell, black metal housing and silver contacts. The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab. Standard D size front panel appearance. Selectable grounding options.

The NKO12SA-L-0-1 is a rugged tactical patch cable, 12x 250/125 micron fibers, aramid yarn for appropriate cable retention, black PVC outer jacket, available in multimode PC and singlemode (APC), suitable for permanent or semi-permanent installations.

The NKO4M-L-0-1 is a rugged and lightweight 4 channel fiber system, improved bending performance due to new tactical fiber design, black matt outer jacket, available in multi- and single-mode (PC or APC). The opticalCON QUAD LITE cable connector accommodates a standard optical 1.25 mm ferrule in a durable plastic housing. It features a spring loaded push-pull locking mechanism and an excellent cable retention utilizing aramid yarn. The connector comes pre-assembled and is not available as a single component. The cable is available in different lengths and comes with an airspool packaging. Note: Currently the normal lead time for opticalCON LITE cables is 7-9 weeks. All orders are non-cancelable and non-returnable.

The NKXP-DATA by Neutrik is a data cable for the XIRIUM PRO digital wireless audio system.XIRIUM PRO combines digital transmission facilitating the highest possible sound quality, reliability, and outstanding performance in one unique solution. As a true replacement for cable bound systems it eliminates the often difficult and time consuming task of running cables.With DiWA (Digital Wireless Audio) Neutrik has developed a technology for digital data transmission achieving high fidelity without data compression. A digital, uncompressed audio stream of 24 bit/48 kHz requires a bandwidth of 1.15 MHz. Such an amount of data can not be transmitted in the UHF band without using a compander. By choosing the 5 GHz band XIRIUM PRO provides 20 MHz bandwidth. Despite employing wireless technology, audio signals are transmitted at the level of quality found in a recording studio.

The NKXPA-5 is an antenna cable for the XIRIUM Pro series.

The NLFASTON is a Faston receptacle for tabs with 'positive lock', Tab Fit 4.75 x 0.51 mm (0.187 x 0.02 in), Equivalent to AMP, pack of 100 pcs.

The NLT8FP-BAG is an 8-pole female chassis with black-chrome metal housing and solder contacts. The speakON STX Series was especially designed for heavy duty amplifier-loudspeaker applications like professional touring. The extremely rugged and durable STX Series features an all metal housing.Attention: speakON is NOT to be used as an AC mains or power supply connector.

The NMC-C-HR is a lockable USB type-C chassis with integral USB IF approved receptacle.The mediaCON product family includes robust, lockable USB Type-C cables and panel sockets. All components are designed for data rates up to 10 GB/s (USB 3.1), 100 W power and 10,000 mating cycles.Design engineers at Neutrik have observed that with increasing digitalization, the demand for high-quality and robust data connectors is steadily increasing. More and more manufacturers rely on USB Type-C technology. However, a lockable and reliable interface to connect professional audio components, storage media, cameras, monitors and computer hardware has been missing. The new mediaCON series now offers the perfect solution for professional AV and broadcast applications, live rental, system integration and industrial applications.

The NMC-C is a lockable USB type-C chassis.The mediaCON product family includes robust, lockable USB Type-C cables and panel sockets. All components are designed for data rates up to 10 GB/s (USB 3.1), 100 W power and 10,000 mating cycles.Design engineers at Neutrik have observed that with increasing digitalization, the demand for high-quality and robust data connectors is steadily increasing. More and more manufacturers rely on USB Type-C technology. However, a lockable and reliable interface to connect professional audio components, storage media, cameras, monitors and computer hardware has been missing. The new mediaCON series now offers the perfect solution for professional AV and broadcast applications, live rental, system integration and industrial applications.

The NMK-20U-0.5( 18 Inches) is a reversible USB Type-C cable with over molded flex relief and rugged cable fit and lock with NMC- Chassis.The mediaCON product family includes robust, lockable USB Type-C cables and panel sockets. All components are designed for data rates up to 10 GB/s (USB 3.1), 100 W power and 10,000 mating cycles.Design engineers at Neutrik have observed that with increasing digitalization, the demand for high-quality and robust data connectors is steadily increasing. More and more manufacturers rely on USB Type-C technology. However, a lockable and reliable interface to connect professional audio components, storage media, cameras, monitors and computer hardware has been missing. The new mediaCON series now offers the perfect solution for professional AV and broadcast applications, live rental, system integration and industrial applications.

The NXPA-6-360-25 is a XIRIUM PRO 5 GHz Antenna for the NXP2 Repeater and Transmission Units.

The RT4FC-B-W is a 4 pole TINY xlr female cable connector, black metal shell, water resistant due to rubber sealing boot (patent pending), gold plated contacts.

The SCD-W is a rubber sealing cover that protects D-Type chassis connectors from dust and water according to protection class IP65.Suitable for the following Connections: XLR D Series male connectors, speakON NL2M and NL4M, powerCON 20 A Series NAC3MPA and NAC3MPB connectors, USB NAUSB-W connectors, HDMI NAHDMI-W and Firewire NA1394-6-W connectors, etherCON CAT6 Chassis Connectors, BNC D Series and Phono (RCA) Chassis Connectors.

The SE8FD-TOP by Neutrik is an assembly kit to cover D-series etherCON connectors into TOP versions. This kit features a D-sized receptacle flange for PCB mount and IDC termination that provides outdoor protection when mated with NE8MX-TOP or sealing cap closed. These kits can be Class D or CAT5e according to ISO/IEC 11801 and TIA/EIA and feature true outdoor protection according to IP65 and UL50E standards.

The `State of the Art` receptacle. Round plastic body XLR PCB mount panel connector. These have the smallest size and highest packing density (23mm between centers). New designed tulip type contacts with hard gold plating and polished contact areas. UL recognized component.NC3FAH1 -- 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mountNC3FAH2 -- 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mountNC3FAV2-0 -- 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, Retention spring instead of latchNC3FAY -- 3 pole female XLR receptacle, grounding: without ground/shell contact, IDC-termination for AWG 24 and AWG 26 wiresNC3MAH -- 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mountNC3MAY -- 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, IDC-termination for AWG 24 and AWG 26 wires

The `State of the Art` receptacle. Round plastic body XLR PCB mount panel connector. These have the smallest size and highest packing density (23mm between centers). New designed tulip type contacts with hard gold plating and polished contact areas. UL recognized component.The Neutrik NC3FAH is a 3-pole female XLR receptacle with grounding: without ground/shell contact and is a horizontal PCB mount.

The `State of the Art` receptacle. Round plastic body XLR PCB mount panel connector. These have the smallest size and highest packing density (23mm between centres). Hard gold plated contacts with polished contact areas. UL recognized component.3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount

The `State of the Art` receptacle. Round plastic body XLR PCB mount panel connector. These have the smallest size and highest packing density (23mm between centres). New designed fork type contacts with hard gold plating and polished contact areas. UL recognized component.5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, color coding available

The angled 19" panel for racks in demanding environments protects the installed receptacles well against the ingress of dirt and water. The panel is 30° forward-turned and offers 8 D-shape cutouts with M3 threaded fastening holes.

The BA Series is the more economical version of the B Series with circumferential metal flange featuring EMC and RF shielding and mechanical robustness.5 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mountThe switching contacts are activated by the mating connector offering the possibility to indicate, monitor and control the mated connection. The switch provides a normal open and normal closed contact.

The BA Series is the more economical version of the B Series with circumferential metal flange featuring EMC and RF shielding and mechanical robustness.5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mountThe switching contacts are activated by the mating connector offering the possibility to indicate, monitor and control the mated connection. The switch provides a normal open and normal closed contact.

The bulkhead connector offers a true 75 Ohm design for serial and digital (HD) signals . The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard).

The bulkhead connector offers a true 75 Ohm design for serial and digital (HD) signals . The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard).Neutrik NBB75DSI -- Isolated Bulkhead Jack, Solder Version in Nickel D-Shape Housing

The bulkhead connector offers a true 75 Ohm design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.

The bulkhead connector offers a true 75 Ohm design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use. Isolated bulkhead jack, solder version.

The DLX series features a compact all metal housing with an ingenious duplex ground contact, which offers excellent RF protection and shielding. It is the ideal match for mating with Neutrik's EMC XLR cable connector.

The dummy PLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally. Sold in packs of 25.

The dummy PLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

The dummy PLUG NDP for Neutrik Phono sockets enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

The dummyPLUG case includes a mixed assortment of dummyPLUGs containing a practical number of each dummyPLUG packed in a handy portable case.The dummyPLUGs for chassis connectors enable you to simplify cabling. Unused inputs can be covered to avoid miswiring and protect against dust additionally.

The dummyPLUG NDL for all 4 pole Neutrik speakON and powerCON chassis enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

The dummyPLUG NDM for Neutrik male XLR receptacles enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

The dummyPLUG NDO for Neutrik opticalCON receptacles enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with radio transmission or mobile phones. The design guarantees a continuous RF shield connection from the cable to the chassis connector housing via a circular capacitor around the cable shield. The circular capacitors act as high-pass filter with a cut-off frequency around 10 MHz. An EMI suppression ferrite bead with 24 Ohm at 1 MHz between pin 1 and the cable screen provides a low-pass filter for improved RF rejection.

The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with radio transmission or mobile phones. The design guarantees a continuous RF shield connection from the cable to the chassis connector housing via a circular capacitor around the cable shield. The circular capacitors act as high-pass filter with a cut-off frequency around 10 MHz. An EMI suppression ferrite bead with 24 Ohm at 1 MHz between pin 1 and the cable screen provides a low-pass filter for improved RF rejection.

The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with radio transmission or mobile phones. The design guarantees a continuous RF shield connection from the cable to the chassis connector housing via a circular capacitor around the cable shield. The circular capacitors act as high-pass filter with a cut-off frequency around 10 MHz. An EMI suppression ferrite bead with 24 Ohm at 1 MHz between pin 1 and the cable screen provides a low-pass filter for improved RF rejection.For panel mount application of the EMC XLR we are offering a special cable version with D flange to mount it into a panel. This panel mountable connector is available as female cable connector only and features the same specifications as the NC3FXX-EMC. It includes the locking nut of the NC3FX-Spec for secure fastening of a gooseneck for instance. For larger panel openings an additional round flange with a diameter of 63.5 mm including mounting screws is available.

The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with radio transmission or mobile phones. The design guarantees a continuous RF shield connection from the cable to the chassis connector housing via a circular capacitor around the cable shield. The circular capacitors act as high-pass filter with a cut-off frequency around 10 MHz. An EMI suppression ferrite bead with 24 Ohm at 1 MHz between pin 1 and the cable screen provides a low-pass filter for improved RF rejection.

The entertainment industry is constantly evolving with increasing demands on interconnection systems. Neutrik took up the challenge and developed a new line of TRUE OUTDOOR PROTECTION (TOP) products for demanding outdoor applications. These ruggedized sealed connectors feature not only IP protection but also UV resistance approved according to UL50E. For safety reasons, connectors have to be protected from outside influences like dust, foreign objects, moisture, water and sunlight, particularly in harsh enviorments. Neutrik TOP connector series handles it all.

The etherCON CAT6 D-shape panel connectors with black metal housing and secure latching system offer a tool-free and gas-tight IDC termination, which makes cable assembly easy and fast.NOTE: Not intermateable to etherCON Cat 5 or Cat 6A NE8MX* cable connectors

The etherCON CAT6 D-shape panel connectors with metal housing and secure latching system offer a tool-free and gas-tight IDC termination, which makes cable assembly easy and fast.

The etherCON Series is a ruggadized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market.Panel mount receptacle with IDC 110 punch down terminals, black D-shape metal flange with latch lock, max. panel thickness 4 mm. Mounting screws included.

The etherCON Series is a ruggadized and lockable RJ45 connector system, optimized for pro-audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market.Vertical PCB panel mount RJ45 receptacle, D-shape metal flange with latch lock, max. panel thickness 4 mm.

The etherCON Series is a ruggadized and lockable RJ45 connector system, optimized for proaudio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market.Vertical PCB panel mount RJ45 receptacle, black D-shape metal flange with latch lock, max. panel thickness 4 mm

The etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market.Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use. Dust protection cover for female chassis connectors.

The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use. Suitable for male chassis connectors.

The handy dust protection cover for speakON NL2M*, NL4M* and NLT4MP* (fits also to all powerCON chassis connector versions). It can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch).The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

The Industry Standard XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

The industry standard XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.3 pole male cable connector with black metal housing and gold contacts.

The miniCON with its flexible and compact design is perfectly suitable for multipin / industrial applications. The rugged all metal miniature connector offers a push-pull locking device and stands out by an excellent cost/performance ratio.Female receptacle, consisting of housing, insert and 12 contacts for vertical PCB mount.About Neutrik miniCON. The miniCON is an extremely compact modular connector, with "push-pull" locking mechanism and with piece parts available as required. The miniCON features up to 12 machined gold plated contacts, with the additional options of horizontal and vertical PCB mount types in the case of the chassis sockets. Non PCB types may be fitted with the required number of solder or crimp contacts which should be ordered separately.Cable mounting housing MSC accepts either male inserts (to take pin contacts) or female inserts (to take socket contacts), and consists of a robust machined alloy housings complete with chuck type cable clamps, and machined alloy cable glands. Housings, inserts and pins should be ordered separately as required. Cable extension housing MMC mates with cable housing MSC, and is used to make extension cables. It accepts the same inserts and contacts as MSC.Cable connectors are also available pre-assembled with inserts and pins, these are based on the MSC cable housing. MSCF12 has 12 female solder contacts, MSCM12 has 12 male solder contacts.The metal bodied panel housings, with matching metal polarising guides, have `back nuts' for simple, single hole mounting, and, in the case of PCB versions, have PCB location facilities on the plastic spill terminal supports. All panel types are supplied complete with insert. Order pins separately as required for standard panel types. Some types are also available fully assembled complete with pins.The series has a rated operating temperature range of -30°C to +80°C, current 3A per contact, and a maximum wire diameter of 0.35mm² solid conductor, 0.24mm² stranded wire. Rated voltage is 960VDC/680VAC, though connectors are not intended for mains applications.

The modular system of the miniCON series offers the possibility to assemble a desired connector from a wide range of various parts. Including additional parts for special versions (e.g. cable connector extension, crimp set, ...). The miniCON with its flexible and compact design is perfectly suitable for multipin/industrial applications. The rugged all metal miniature connector offers a push-pull locking device and stands out by an excellent cost/performance ratio.

The modular system of the miniCON series offers the possibility to assemble a desired connector from a wide range of various parts. Including additional parts for special versions (e.g. cable connector extension, crimp set, ...).The neutriCON connectors are designed for multipin/industrial applications in harsh and demanding environment. The very robust all metal circular connector offers easy and screwless assembly, flexible part combination and a push-pull locking mechanism.

The Neutricon? connectors are designed for multipin / industrial applications in harsh and demanding environment. The very robust all metal circular connector offers easy and screwless assembly, flexible part combination and a push pull locking mechanism.

The Neutrik CONC5FDM3HPCBRJ is a Unified D Series M3 Tapped Panel Mount with PCB Connection

The Neutrik FOCD-STM is an inspection and cleaning tool for opcticalCON MTP cable connectors.

The Neutrik NA-TM-KIT is a truss yoke kit for the installation of up to 2 devices on a truss. It's compatible with all Neutrik network devices, such as NA2-IO-DLINE, NA2-IO-DPRO and of course the NPS-30W. The kit comes with 2 safety frames and a set of screws to allow a safe installation on a truss.

The Neutrik NA2-IO-DPRO is a 2IN, 2OUT breakout box designed to connect legacy audio equipment with a Dante® network. It features high-quality microphone preamps and 2 Dante® ports for either redundant setup or daisy chaining. Audio parameters are adjusted by the DPRO Controller app.All connectors are lockable and, together with the removable rubber protection, offer a reliable solution for tough stage conditions. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, racks or on a truss. PLEASE NOTE! Requires a Power over Ethernet switch or a PoE injector (802.3 af/at - class 2 or no classification at 6 W)

The Neutrik NA2JJ plug2PLUG is a simple yet sophisticated plug adapter for a quick and easy connection of two mono TS plugs.

The Neutrik NBB75FA BNC feed through coupler offers a true 75 Ohm design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.Cage Type Contact Closed contact design that is extremely robust with a Gold plated cage type clip for the best possible shielding and lowest contact resistance.

The Neutrik NBNC75BDD6-D rearTWIST HD BNC cable connector offers a true 75 Ω design and is perfectly suitable for HD applications.The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding.Suitable Cables Belden 1855A, Clark Wire CD7523-7, CommScope 7538Crimp Size Pin: 1.6 mm (square) Shield: 4.53 mm (hex)

The Neutrik NBNC75BDD6X rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.Optimized Return Loss Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption. Suitable cables: Belden 1855A, Clark Wire CD7523-7, CommScope 7538

The Neutrik NBNC75BUU11X rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.Optimized Return Loss Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption. Crimp Dimensions In order to achieve optimum return loss values at high frequencies the crimp dimension of the contact pin has been reduced.PIN: 1.07mm Shield: 7.36mm Crimp Die: DIE-R-BNCX-PUApproved Cables To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below. Suitable Cables: Argosy Image 1000, Cordial CVI 10-48 HD, Draka 1.0/4.8 AF, Draka 755-901/5, Klotz V10/48, Percon VK7UHD Optimized Cables: Belden 1694A, Belden 1694ANH, Belden 1694DNH, Belden 70082, Belden 70082NH, Belden 70082CH

The Neutrik NBTC75BFI4-D rearTWIST HD Tiny BNC cable connector is optimized for small cable diameters. The additional leading ferrule eases the critical assembly of multicore or tiny cables.Like all Neutrik BNCs it offers a true 75 Ω design and is perfectly suitable for HD applications.The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding.Suitable Cables Belden 1520A, Belden 1521A, Belden 1522A, Belden 179DT, Draka 0.31/1.45 AF, Draka 753-1304(2), Draka 755-1302, Suhner G02233, ZNK CM14BCrimp Size Pin: 1.6 mm (square) Shield: 4.06 mm (hex) Pack size: 100

The Neutrik NC3MBY-B is a 3 pole male XLR receptacle with a steel retention lug. This is the IDC-version for AWG 26-24 wires with a black chrome shell. It also features a separate ground contact to mate the connector shell and front panel.The NC3MBY-B is the same as the A series with the exception of a metal mounting flange. It features a continuous circumferential ground contact to the chassis for best EMC practice and is a UL recognized component.

The Neutrik NC3MXX-B next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.3 pole male cable connector with black metal housing and gold contacts.

The Neutrik NC4FDM3-H-BAG is a 4 pole XLR female receptacle with a horizontal PCB mount, black metal housing, silver contacts and M3 mounting holes. It's part of the Universal D-size metal body XLR panel mount series and is a UL recognized component.

The Neutrik NC4FP-1 is a 4-Pin Female Chassis Mount XLR Connector which features solder contacts, nickel housing & silver contacts.Smallest available traditional style metal panel mount connector with large solder cups for ease hard wiring.

The Neutrik NC5FXX-HD-D is a heavy duty female 5 pole XLR cable connector for outdoor use.

The Neutrik NC5MDX-TOP X-TOP series is a "heavy-duty" XLR chassis connector for outdoor use. Outdoor protected by mating with related cable connector of the XLR TOP range (IP65 and UL50E). Gold contacts are standard.

The Neutrik NC5MX-TOP (True Outdoor Protected) 5 pole male cable connector is a heavy-duty sealed XLR connector made specifically for harsh and demanding environments. It's gold contacts and use of high impact UV-resistant materials gives you complete outdoor protection according to IP65 and UL50E (in combination with a TOP range counterpart).The X-TOP series is a "heavy-duty" XLR cable connector for outdoor use. Outdoor protected by mating with related cable or chassis connector of the XLR TOP range (IP65 and UL50E). Gold contacts are standard.