Attributes . 2-1/4 . Names

O.D. (in) (2)   OAL (Fractional) (2)   OD (36)   od in (3)   Offset (2)   Offset (Swivel Lead) (2)   Open End Width (Inch) (6)   Opening Height Above Li. (1)   Outer Diameter - Fracti. (5)   Outlet Height (In.) (2)   Output Size (1)   Outside Dia. (48)   Outside Diameter (5)   Outside Dimension (8)   Outside Width (4)   Outter Diameter (4)   Overall depth (in) (2)   Overall Diameter (2)   Overall Height (21)   Overall Height (In.) (12)   Overall Length (188)   Overall Length (In.) (34)   Overall Length (L) (7)   Overall Length (OAL) (4)   Overall length - fracti. (2)   overall length inch (1)   Overall Width (16)   Pad Size (In.) (3)   Peak HP (2)   Pin Hole: (2)   Pin-center-to-end (2)   Pipe Dia. (In.) (1)   Pipe Fitting Length (2)   Product height (10)   Product Max Depth (Fron. (1)   Product Max Height (Top. (2)   Product Projection Frac. (3)   Product Weight (lbs.) (4)   Projection (19)   Projection from Wall (10)   Projection from Wall (I. (2)   Quill Diameter (in.) (1)   Required Hole Size (2)   Resilient Ring Dia. (15)   Retracted Length (4)   Rod Outside Width (10)   Roller Dia. (2)   Saw Dia. (12)   Screw Holes Size (1)   Seal Size ID (in.) (1)   Seat Height (4)   Shaft Diameter (in) (1)   Shaft Length (169)   Shank Length (12)   Shank Length (In.) (5)   Shank Size (1)   Sheave Outside Dia. (9)   Shelf Adjustment Increm. (5)   Shoulder Length (7)   Shoulder Width Or End P. (2)   Size (44)   Size(in) (8)   Socket Sizes (5)   Sockets on Centers (in.) (4)   Space Between Shelves (2)   Spout Height (46)   Spout Length (1)   Steel Length (Inches) (5)   Stem Length (1)   Strike Base Width (2)   Strike Dim. (13)   Strike Height (5)   Strike Size (5)   Stroke (4)   Stud Length (6)   Swivel Lead (1)   Swivel Radius (1)   Tab Width (1)   Table Top Mount Diameter (1)   Tape Width (2)   Taper Length (In.) (8)   Terminal Dia. (5)   Thickness (9)   Thread Length (25)   Thread Size (1)   Thread Size - Automotiv. (4)   Throat Depth (18)   Tip Size (1)   Tool Diameter (in) (4)   Tool Size (13)   Top Diameter (7)   Total Capacity (1)   Total Length (8)   Total Length (L) (16)   Trap Seal (4)   Trim Length (15)   Usable Length (3)   Vacuum Connection Size . (2)   Washer Outside Dia. (2)   Well Size (2)