Attribute Values: Other

Dixon, 2WCA6025F-C, Double Clapper Concealed Type Siamese Assembly Features <ul><li>Fully reversible with a perpendicular trunnion allowing one body to be installed for top and bottom connections </li> </ul> Construction <ul><li>Complete unit consists of the following six parts: (1) 90CREV6025, (1) 24-385 plate, (2) 23-270 double female connections, (2) 17-127 plugs with chains </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, 400-E-ALH, Dixon/Boss-Lock Cam & Groove Type E Adapter x Hose ShankApplications <ul><li>Designed for use with liquids </li> </ul> Specifications <ul><li>Produced to interchange with all product produced to Commercial Item Description A-A-59326D </li> </ul> Features <ul><li>Precision machined to rigid tolerances </li> </ul> How it works <ul><li>To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. </li> <li>Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. </li> </ul> Safety notes <ul><li>Under no circumstances should cam and groove couplings be used for compressed air or steam service! </li> <li>Pressure rating is based on the seal of the mating part </li> <li>Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F / 21°C with a standard seal installed. </li> </ul>

Dixon, 4AGOF5-PV, AG-Series 1/2" Steel Agricultural Poppet Valve Coupler 7/8" ORB Applications <ul><li>Used on construction equipment, farm implements and most other mobile equipment </li> </ul> Specifications <ul><li>The International Standard Organization (ISO) has adopted specifications regarding dimensions and interchangeability. </li> </ul> Construction <ul><li>Machined components are manufactured using solid bar stock </li> <li>Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. </li> <li>Steel componentry is plated using ROHS Compliant Trivalent Chrome. </li> <li>Steel coupler sleeves are hardened to resist deformation and maximize service life. </li> <li>Nitrile (Buna-N) seals are standard </li> <li>Couplers have a PTFE Anti-Extrusion ring </li> <li>Poppet valve seals are crimped in place to maintain integrity during excessive flow conditions and pressurized connection. </li> </ul> Compatibility & Interchange Data <ul><li>Pioneer Agricultural Interchange </li> <li>Parker/Pioneer 4000 Series </li> <li>Safeway S20 </li> </ul>

Dixon, 6500-12-10, 90 Deg Male 37 Deg Flare x Female 37 Deg Swivel Elbow, Thread Size 1-1/16"-12 - 7/8"-14 Specifications <ul><li>Reference SAE 070221 </li> </ul>

Dixon, 65035611WP2, LIQUIfit 1/4" Tube To Tube Swivel Male Run Tee, Male Thread Size 1/8" Applications <ul><li>Suitable for water, potable liquids and neutral gas applications, including water filtration, water coolers, coffee machines and beverage dispensers </li> </ul> Specifications <ul><li>FDA compliant </li> <li>NSF-51 listed for contact with food </li> <li>NSF-61 list C-Hot rated </li> <li>Meets California and Vermont <0.25% lead requirements</li> </ul> Features <ul><li>EPDM seal secures connection with larger surface area than standard O-rings </li> <li>Engineered polymer allows superior mechanical strength and chemical resistance </li> <li>Full stainless gripping ring eliminates the need for locking clips </li> <li>Release button protects and supports tubing </li> </ul>

Dixon, 6901-12-8, 90 Deg SAE O-Ring Boss x Female NPSM Swivel Nut Elbow, Thread Size 1-1/16"-12 - 1/2"-14

Dixon, 6WBF4-B-HN, W-Series 1.92" Brass DQC Wingstyle Interchange Hex-Nut Female Coupler Construction <ul><li>Machined components are manufactured using solid bar stock </li> <li>Stainless steel retaining rings and springs maximize corrosion resistance and extend service life </li> <li>Steel componentry is plated using ROHS Compliant Trivalent Chrome </li> <li>Nitrile (Buna-N) seals are standard </li> <li>Main coupler valve has a bonded face-seal to improve seal integrity during pressurized connection/disconnection </li> <li>Redundant O-Ring on the coupler body will engage nipple for secondary sealing support </li> <li>Coupling has a PTFE back-up ring on the valve sleeve to extend service life </li> </ul> Compatibility & Interchange Data <ul><li>Aeroquip 5100-Series, Parker 6100-Series </li> <li>Snap-Tite 78-Series, Faster Series-FB, Safeway S51-Series </li> </ul> Safety notes <ul><li>Although wingstyle couplings are able to connect and disconnect while under pressure, it is recommended that hydraulic power supply be de-energized during connection to ensure operator safety. If it is not possible to de-energize the circuit, operators must be aware of their surroundings to ensure that an attachment or tool does not put them at risk, once hydraulic power is applied during the connection process </li> <li>W-series couplings are not recommended for continuous hydraulic impulse applications at rated pressures </li> <li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling </li> </ul>

Dixon, 6WSF6-BOP, DQC WS-BOP Series High Pressure Wingstyle Female CouplerApplications <ul><li>Designed for use in oil rig BOP systems where couplings are required to operate under fire conditions in an emergency. </li> </ul> Specifications <ul><li>BOP Couplings have been fire tested and Lloyd's certified to 700°C (1300°F) in accordance with API 16D. Certificate available upon request. </li> <li>Lloyd's Test Pressure: 5,000 PSI </li> </ul> Construction <ul><li>Machined components are manufactured using solid steel bar stock. </li> <li>Stainless steel retaining rings and springs maximize corrosion resistance and extend service life. </li> <li>Steel componentry is plated using ROHS Compliant Zinc Nickel </li> <li>Rugged high-strength steel wing nut for threaded connect and disconnect operation. </li> <li>Red powder coated coupler wing-nut and external nipple O-ring for easy BOP service identification. </li> <li>Blow-out Prevention (BOP) couplings contain severe service FKM seals </li> <li>PTFE anti-extrusion ring protects main coupling O-Ring from dynamic impulse pressure damage. </li> <li>Main valve seal is 'housed' to improve seal integrity during pressurized connection/disconnection. </li> </ul> Compatibility & Interchange Data <ul><li>Snap-Tite 75-Series </li> <li>DNP VFF-HD BOP series </li> </ul>

Dixon, 7550-E-AL, Dixon/Boss-Lock Cam & Groove Type E Adapter x Hose ShankApplications <ul><li>Designed for use with liquids </li> </ul> Specifications <ul><li>Produced to interchange with all product produced to Commercial Item Description A-A-59326D </li> </ul> Features <ul><li>Precision machined to rigid tolerances </li> </ul> How it works <ul><li>To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. </li> <li>Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. </li> </ul> Safety notes <ul><li>Under no circumstances should cam and groove couplings be used for compressed air or steam service! </li> <li>Pressure rating is based on the seal of the mating part </li> <li>Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F / 21°C with a standard seal installed. </li> </ul>

Dixon, 8WSF8-SS-BOP, WS-BOP Series 4.00" 316 SS High Pressure Wingstyle Female Coupler Applications <ul><li>Designed for use in oil rig BOP systems where couplings are required to operate under fire conditions in an emergency </li> </ul> Specifications <ul><li>BOP Couplings have been fire tested and Lloyd's certified to 700°C (1300°F) in accordance with API 16D. Certificate available upon request </li> <li>Lloyd's Test Pressure: 5,000 PSI </li> </ul> Construction <ul><li>Machined components are manufactured using solid 316 stainless steel bar stock </li> <li>Stainless steel retaining rings and springs maximize corrosion resistance and extend service life </li> <li>Steel componentry is plated using ROHS Compliant Zinc Nickel </li> <li>Rugged high-strength steel wing nut for threaded connect and disconnect operation </li> <li>Red powder coated coupler wing-nut and external nipple O-ring for easy BOP service identification </li> <li>Blow-out Prevention (BOP) couplings contain severe service FKM seals </li> <li>PTFE anti-extrusion ring protects main coupling O-Ring from dynamic impulse pressure damage </li> </ul> Compatibility & Interchange Data <ul><li>Snap-Tite 75-Series </li> <li>DNP VFF-HD BOP series </li> </ul>

Dixon, 90TCS6025F, Triple Clapper Siamese Connection Bottom Outlet Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, AQ68DOT6X6, D.O.T. Push-In Male Connector, 3/8" Male x 3/8" Tube ODUse <ul><li>Fittings are suitable for use up to the maximum working pressure of the plastic tubing used. </li> <li>Suitable for vacuum service </li> <li>SAE J844 compatible tubing </li> </ul> Specifications <ul><li>Meets D.O.T FMVSS 571.106 and SAE J1131, SAE J2494-1 and SAE J2494-3 </li> </ul> Features <ul><li>Pre-applied thread sealant (Loctite 516) on male pipe threads </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, B2S-G300P, 3" 304 Stainless Steel Polished 90 deg Weld Elbow with Tangent Specifications <ul><li>3-A Sanitary Standards for Sanitary Fittings, Number 63-03 (Authorization number 621). </li> </ul> Construction <ul><li>3A sanitary finish ID and OD </li> </ul>

Dixon, B5101E300CC-F, B5101, 3" Butterfly Valve w/ Vertical Spring Return Actuation Features: <ul><li>Shipped fully assembled, including pneumatic actuator and mounting bracket assembly </li> </ul> Construction: <ul><li>Vertical spring return pneumatic canister style actuator </li> <li>EPDM Elastomers </li> </ul>

Dixon, B5121E800LL-BBC, 8" Spring Return Pneumatic Butterfly Valve Use <ul><li>Installs between standard ANSI class 150# flanges </li> </ul> Specifications <ul><li>Valve conforms to MSS-SP-67,MSS-SP-25, API-609 </li> </ul> Features <ul><li>Valve has a cast iron body with extended neck, a nickel plated ductile iron disk and a replaceable EPDM seat. </li> <li>The valves seat backing ring ensures blow-out proof service. </li> <li>Valve features no taper pins and is field repairable (seat kits available). </li> <li>Rack and Pinion actuator has a hard anodized aluminum body, nickel plated anti-blowout pinion, Buna-N O-rings and NAMUR mounting. </li> <li>Actuator is tested to one million cycles and it features bi-directional stops for ±5° travel adjustment and visual position indication. </li> <li>80 PSI plant air is required </li> </ul>

Dixon, BruteXpand, 13" x 17" x 10" High X-Pander Brute Compact Hand Pump Features: <ul><li>All-in-one design means fewer parts and no hydraulic connections making the X-Pander reliable </li> </ul> Applications: <ul> <li>Designed for forestry service, fire departments, small distributors and ski areas </li> </ul>

Dixon, BV2IG-12511-BCC, Pneumatically Actuated 3-Piece Stainless Ball Valve Features <ul><li>Valve has 15% glass reinforced RTFE seats, a blow-out proof stainless steel stem, live-loaded stem packing and an ISO5211 mounting pad </li> <li>Swing out in-line easy maintenance </li> <li>Rack and Pinion actuator has a hard anodized aluminum body, nickel plated anti-blowout pinion, Buna-N O-rings and NAMUR mounting. </li> <li>Actuator is tested to one million cycles and it features bi-directional stops for ±5° travel adjustment and visual position indication. </li> <li>80 PSI plant air is required </li> </ul> Safety notes <ul><li>Even though there are torque safety factors built into our automated ball valve packages, actual service conditions must also be considered when selecting the proper product for the appropriate application. </li> <li>Severe service conditions such as dirty water, dirty air, all slurries, raw sewage water, oils, and other viscous fluids can have a dramatic affect in raising the torque requirements of ball valves as much as 75% and therefore larger actuators may be required. </li> </ul>

Dixon, BV3BVLR-0251-ET, Electrically Actuated 3-Way Brass Ball Valve Specifications <ul><li>ISO 9001, CS, CE and CSA-C US </li> <li>RoHS compliant </li> </ul> Features <ul><li>Valves has a reduced port, a blow-out proof stem, a chrome-plated brass ball and an ISO 5211 mounting pad </li> <li>Valve has PTFE seats with O-ring backing for low operating torque and PTFE seats and double O-ring stem packing </li> <li>100% tested </li> <li>Electric actuator has lightweight powder coated aluminum alloy housing and is NEMA 4/4X waterproof and dustproof </li> <li>Actuator features extended duty cycle induction motor, high alloy steel gear train, H-insulation class, visual position indication, space heater and manual override standard </li> </ul> Note <ul><li>A flow path needs to be selected at the time of order. Customer verification is critical. If flow path needs to be changed after being shipped labor and shipping charges will apply. </li> <li>For spring return actuators: must not fail position. </li> </ul> Safety notes <ul><li>Even though there are torque safety factors built into our automated ball valve packages, actual service conditions must also be considered when selecting the proper product for the appropriate application. </li> <li>Severe service conditions such as dirty water, dirty air, all slurries, raw sewage water, oils, and other viscous fluids can have a dramatic affect in raising the torque requirements of ball valves as much as 75% and therefore larger actuators may be required. </li> <li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, BV3BVTR-0501BBC, Pneumatically Actuated 3-Way Brass Ball Valve Features <ul><li>Valve has a reduced port, a blow-out proof stem and a chrome-plated brass ball </li> <li>Valve has PTFE seats with O-ring backing for low operating torque and PTFE seats and double O-ring stem packing </li> <li>Rack and Pinion actuator has a hard anodized aluminum body, nickel plated anti-blowout pinion, Buna-N O-rings and NAMUR mounting. </li> <li>Actuator is tested to one million cycles and it features bi-directional stops for ±5° travel adjustment and visual position indication. </li> <li>80 PSI plant air is required </li> </ul> Note <ul><li>A flow path needs to be selected at the time of order. Customer verification is critical. If flow path needs to be changed after being shipped labor and shipping charges will apply. </li> <li>For spring return actuators: must not fail position. </li> </ul> Safety notes <ul><li>Even though there are torque safety factors built into our automated ball valve packages, actual service conditions must also be considered when selecting the proper product for the appropriate application. </li> <li>Severe service conditions such as dirty water, dirty air, all slurries, raw sewage water, oils, and other viscous fluids can have a dramatic affect in raising the torque requirements of ball valves as much as 75% and therefore larger actuators may be required. </li> <li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, BV3IGTF-0501-EG, Electrically Actuated 3-Way Stainless Ball Valve Specifications <ul><li>ISO 9001, CS, CE and CSA-C US Certified </li> <li>RoHS compliant </li> </ul> Features <ul><li>Valve has a full port with female NPT ends, a blow-out proof stem, live-loaded stem packing and an ISO 5211 mounting pad </li> <li>100% air tested under water at 80 PSI </li> <li>Electric actuator has lightweight powder coated aluminum alloy housing and is NEMA 4/4X waterproof and dustproof </li> <li>Actuator features extended duty cycle induction motor, high alloy steel gear train, H-insulation class, visual position indication, space heater and manual override standard </li> </ul> Note <ul><li>A flow path needs to be selected at the time of order. Customer verification is critical. If flow path needs to be changed after being shipped labor and shipping charges will apply. </li> <li>For spring return actuators: must not fail position. </li> </ul> Safety notes <ul><li>Even though there are torque safety factors built into our automated ball valve packages, actual service conditions must also be considered when selecting the proper product for the appropriate application. </li> <li>Severe service conditions such as dirty water, dirty air, all slurries, raw sewage water, oils, and other viscous fluids can have a dramatic affect in raising the torque requirements of ball valves as much as 75% and therefore larger actuators may be required. </li> </ul>

Dixon, BV3IGTF-0501BBC, Pneumatically Actuated 3-Way Stainless Ball Valve Features <ul><li>Valve has a full port, female NPT ends, a blow-out proof stem, live-loaded stem packing and an ISO5211 mounting pad </li> <li>100% air tested under water at 80 PSI </li> <li>Rack and Pinion actuator has a hard anodized aluminum body, nickel plated anti-blowout pinion, Buna-N O-rings and NAMUR mounting. </li> <li>Actuator is tested to one million cycles and it features bi-directional stops for ±5° travel adjustment and visual position indication. </li> <li>80 PSI plant air is required </li> </ul> Note <ul><li>A flow path needs to be selected at the time of order. Customer verification is critical. If flow path needs to be changed after being shipped labor and shipping charges will apply. </li> <li>For spring return actuators: must not fail position. </li> </ul> Safety notes <ul><li>Even though there are torque safety factors built into our automated ball valve packages, actual service conditions must also be considered when selecting the proper product for the appropriate application. </li> <li>Severe service conditions such as dirty water, dirty air, all slurries, raw sewage water, oils, and other viscous fluids can have a dramatic affect in raising the torque requirements of ball valves as much as 75% and therefore larger actuators may be required. </li> </ul>

Dixon, CF100-1SS, King Crimp Style Ferrule, 1.313" ID x 1" Hose ID, 304 Stainless Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF100-9CS, King Crimp Style Ferrule, 1.813" ID x 1" Hose ID, Carbon Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF150-1CS, King Crimp Style Ferrule, 1.75" ID x 1-1/2" Hose ID, Carbon Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF200-2SS, King Crimp Style Ferrule, 2.375" ID, 304 Stainless SteelUse <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF300-5CS, King Crimp Style Ferrule, 3.563" ID x 3" Hose ID, Carbon Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF300-8SS, King Crimp Style Ferrule, 3.75" ID x 3" Hose ID, 304 Stainless Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF400-10CSHD, King Crimp Style Ferrule, 4.875" ID x 4" Hose ID, Heavy Duty Carbon Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>400 PSI working pressure with a minimum 4:1 safety factor (hose burst: hose working pressure) is only achieved with Dixon carbon steel ferrule part numbers CF400-6CSHD through CF400-16CSHD on Dixon Frac Fittings </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF400-15CS, King Crimp Style Ferrule, 5.188" ID x 4" Hose ID, Carbon Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF400-16SS, King Crimp Style Ferrule, 5.25" ID x 4" Hose ID, 304 Stainless Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CF600-3CS, King Crimp Style Ferrule, 6.75" ID x 6" Hose ID, Carbon Steel Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CS100-8CS, King 1" ID, 1-41/64" - 1-44/64" Hose OD Carbon Steel Crimp Style Sleeve Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CS125-5SS, King 1-1/4" ID, 1-49/64" - 1-52/64" Hose OD 304 Stainless Steel Crimp Style Sleeve Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CS150-4CS, King 1-1/2" ID, 1-53/64" - 1-56/64" Hose OD Carbon Steel Crimp Style Sleeve Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CS200-8CS, King 2" ID, 2-41/64" - 2-44/64" Hose OD Carbon Steel Crimp Style Sleeve Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CS300-10CS, King 3" ID, 3-49/64" - 3-52/64" Hose OD Carbon Steel Crimp Style Sleeve Use <ul><li>For use with crimp style shanks. </li> </ul> Safety notes <ul><li>Only use the crimp style shanks with the crimp style sleeves and ferrules. Due to differences in dimensions and tolerances for safety reasons, do not interchange other manufacturer's products with Dixon products. </li> <li>Pressure rating given at 70°F </li> </ul>

Dixon, CSC-T24-1, King 1-1/2" Carbon Steel Convoluted Crimp Collar Use <ul><li>For use with open pitch convoluted PTFE hose only </li> </ul> Features <ul><li>New design for ease of installation and improved appearance of finished crimp </li> </ul>

Dixon, CSS200-7CS, 2" ID, 2-37/64" - 2-40/64" Hose OD Short Crimp SleeveUse <ul><li>For use with King Combination Nipples only. </li> </ul> Features <ul><li>A reliable alternative to band clamps </li> </ul> Safety notes <ul><li>Not for use with Dixon King Crimp Style Shanks </li> </ul>

Dixon, DBC62-200, Dry Break Cam & Groove Dry Disconnect Coupler x Female NPTApplications <ul><li>Dry disconnects help prevent spillage from normal or accidental disconnects. A spring loaded sealing device is designed to "snap" closed should the valve become disconnected with the poppet open, significantly limiting liquid loss. </li> </ul> Use <ul><li>Use with DBA style adapters </li> <li>Use with standard cam and groove dust plug sized one size larger than the dry disconnect size </li> <li>Use Cam & Groove Dust Plug Size: 2-1/2" </li> </ul> Specifications <ul><li>Canadian registration number CRN # OH14044 all provinces </li> </ul> Features <ul><li>Coupler has automatic closing poppet assembly </li> <li>Heavy duty construction provides long service life </li> <li>Stainless steel handle allows product exposure to corrosive chemicals or washdown service </li> <li>Strong handle attachment prevents bending of crank assembly </li> <li>Dixon EZ Boss-Lock cam arms provide added security from accidental opening due to vibration or snagging. Very easy to use, just close the arms and they lock, to open simply lift the lever. </li> </ul> Construction <ul><li>Stainless steel internals </li> <li>Heavy duty stainless steel handle, crank and link </li> </ul> Compatibility & Interchange Data <ul><li>Compatible with most other brands of cam and groove style dry disconnects </li> <li>Fully interchangeable with Kamvalok (OPW trademark) style fittings </li> </ul> Safety notes <ul><li>Must be used with a DBA (Dry Break Cam & Groove) Style adapter for coupler to operate. Adapter sold separately. </li> <li>Maximum pressure rating is based on PSI at 70°F </li> </ul>

Dixon, DC2042LSE, Parker E-z-mate Industrial Coupler Push-Lock Hose BarbSpecifications <ul><li>ISO 4414 requirements for a controlled pressure release system </li> </ul> Features <ul><li>Ez-Mate couplings combine push-to-connect, exhaust-style action with a self-locking valve sleeve to guard against accidental disconnection. </li> </ul> How it works <ul><li>Simply follow the on-off arrow stamped on the yellow chromate valve sleeve. Valve sleeve acts as an integral shut-off valve that allows connection and disconnection at zero pressure. When the sleeve is moved to shut off air flow, it automatically vents downstream allowing for disconnection at zero pressure and eliminating the risk of hose whip. </li> </ul> Safety notes <ul><li>Not recommended for vacuum service </li> </ul>

Dixon, DC2644LSE, Parker E-z-mate Industrial Coupler Push-Lock Hose BarbSpecifications <ul><li>ISO 4414 requirements for a controlled pressure release system </li> </ul> Features <ul><li>Ez-Mate couplings combine push-to-connect, exhaust-style action with a self-locking valve sleeve to guard against accidental disconnection. </li> </ul> How it works <ul><li>Simply follow the on-off arrow stamped on the yellow chromate valve sleeve. Valve sleeve acts as an integral shut-off valve that allows connection and disconnection at zero pressure. When the sleeve is moved to shut off air flow, it automatically vents downstream allowing for disconnection at zero pressure and eliminating the risk of hose whip. </li> </ul> Safety notes <ul><li>Not recommended for vacuum service </li> </ul>

Dixon, DDA100ALFL, Mann Tek Dry Disconnect Adapter Tank Unit x 150# ASA Flange Applications <ul><li>Dry disconnect couplings are designed for the quick and spill free connection and disconnection of hoses and pipelines. They are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids. </li> </ul> Use <ul><li>Use with composite (Polyeten PE-HD 300) caps for protection against corrosion; caps withstand hot and cold environments. </li> </ul> Specifications <ul><li>Produced according to NATO standard STANAG 3756 and ATOFINA SGM 2049.TUY.C. </li> </ul> Features <ul><li>Conical valve seat reduces the risk for piston blow out </li> <li>PTFE bearing between the piston shaft and the piston guide eliminate the risk for seizure </li> <li>Easy to handle - push and turn - free flow, turn and pull - closed </li> <li>Time saving - no need to drain hoses or pipe systems </li> <li>Economical - no loss or spillage of liquids at connection or disconnection </li> <li>Safety - the valve cannot be opened until the unit is coupled </li> <li>Environmental friendly - accidental spillage eliminated when properly used </li> <li>Safe and reliable - due to rugged construction </li> <li>Product life - uncomplicated design and high quality materials ensures long product life </li> <li>Selectivity - to avoid product contamination, selective versions of the couplers and adapters are available. </li> </ul> Construction <ul><li>Aluminum poppet </li> <li>Stainless steel internal parts </li> </ul> Compatibility & Interchange Data <ul><li>Compatible with Mann-Tek, Avery Hardoll and Todo-matic® and any other product produced according to NATO standard STANAG 3756 </li> </ul> Installation <ul><li>Adapter is usually installed on the tank or manifold </li> </ul> Safety notes <ul><li>Working pressure is based on PSI at ambient temperature 70°F </li> </ul>

Dixon, DDA300AL119TTMA, Mann Tek Dry Disconnect Adapter Tank Unit x TTMA Flange Applications <ul><li>Dry disconnect couplings are designed for the quick and spill free connection and disconnection of hoses and pipelines. They are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids. </li> </ul> Use <ul><li>Use with composite (Polyeten PE-HD 300) caps for protection against corrosion; caps withstand hot and cold environments. </li> </ul> Specifications <ul><li>Produced according to NATO standard STANAG 3756 and ATOFINA SGM 2049.TUY.C. </li> </ul> Features <ul><li>Conical valve seat reduces the risk for piston blow out </li> <li>PTFE bearing between the piston shaft and the piston guide eliminate the risk for seizure </li> <li>Easy to handle - push and turn - free flow, turn and pull - closed </li> <li>Time saving - no need to drain hoses or pipe systems </li> <li>Economical - no loss or spillage of liquids at connection or disconnection </li> <li>Safety - the valve cannot be opened until the unit is coupled </li> <li>Environmental friendly - accidental spillage eliminated when properly used </li> <li>Safe and reliable - due to rugged construction </li> <li>Product life - uncomplicated design and high quality materials ensures long product life </li> <li>Selectivity - to avoid product contamination, selective versions of the couplers and adapters are available. </li> </ul> Construction <ul><li>Aluminum poppet </li> <li>Stainless steel internal parts </li> </ul> Compatibility & Interchange Data <ul><li>Compatible with Mann-Tek, Avery Hardoll and Todo-matic® and any other product produced according to NATO standard STANAG 3756 </li> </ul> Installation <ul><li>Adapter is usually installed on the tank or manifold </li> </ul> Safety notes <ul><li>Working pressure is based on PSI at ambient temperature 70°F </li> </ul>

Dixon, DDA300SS105FL, Mann Tek Dry Disconnect Adapter Tank Unit x 150# ASA Flange Applications <ul><li>Dry disconnect couplings are designed for the quick and spill free connection and disconnection of hoses and pipelines. They are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids. </li> </ul> Use <ul><li>Use with composite (Polyeten PE-HD 300) caps for protection against corrosion; caps withstand hot and cold environments. </li> </ul> Specifications <ul><li>Produced according to NATO standard STANAG 3756 and ATOFINA SGM 2049.TUY.C. </li> </ul> Features <ul><li>Conical valve seat reduces the risk for piston blow out </li> <li>PTFE bearing between the piston shaft and the piston guide eliminate the risk for seizure </li> <li>Easy to handle - push and turn - free flow, turn and pull - closed </li> <li>Time saving - no need to drain hoses or pipe systems </li> <li>Economical - no loss or spillage of liquids at connection or disconnection </li> <li>Safety - the valve cannot be opened until the unit is coupled </li> <li>Environmental friendly - accidental spillage eliminated when properly used </li> <li>Safe and reliable - due to rugged construction </li> <li>Product life - uncomplicated design and high quality materials ensures long product life </li> <li>Selectivity - to avoid product contamination, selective versions of the couplers and adapters are available. </li> </ul> Construction <ul><li>Stainless steel poppet </li> <li>Stainless steel internal parts </li> </ul> Compatibility & Interchange Data <ul><li>Compatible with Mann-Tek, Avery Hardoll and Todo-matic® and any other product produced according to NATO standard STANAG 3756 </li> </ul> Installation <ul><li>Adapter is usually installed on the tank or manifold </li> </ul> Safety notes <ul><li>Working pressure is based on PSI at ambient temperature 70°F </li> </ul>

Dixon, DMH25NYC25NYC, 2-1/2" Male NYC x 2-1/2" Male NYC Cast Brass Hex Nipple Safety notes <ul><li>Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, F-ADFR2525F, 2-1/2" X 2-1/2" NST (NH) Forged Aluminum Double Female Swivel Rocker Lug Construction <ul><li>Rocker Lug </li> </ul>

Dixon, F602-044A, F602-Series Compact Filter Manual Drain, 1/2" Port 85 SCFM Flow <h4>Features: </h4> <ul><li>Manual Drain </li> <li>Zinc bowl with sight glass </li> <li>40 micron polypropylene element </li> <li>4.4 oz. bowl </li> <li>Zinc body </li> </ul>

Dixon, FC3102ST25, 2" Type B Heavy Duty Female Coupler X Combo Nipple Hose Shank Applications <ul><li>The primary application for these fittings are irrigation and suction lines. </li> </ul> Use <ul><li>Recommended for use with steel King Crimp Sleeves </li> </ul> Features <ul><li>Bauer style </li> <li>Locks on the male side </li> <li>Features a Dixon Combo Nipple style hose shank machined from Schedule 40 pipe </li> </ul> Construction <ul><li>All components are galvanized </li> </ul>

Dixon, FJS90-03-03, 3/16" 304 Stainless Steel Nominal Smooth Bore PTFE Hose 90deg FJIC Fitting Features <ul><li>Crimp Collars for all Nominal fittings are included </li> </ul>

Dixon, FLC2405-10-08, 5/8" Male Tube OD X 1/2" Female NPTF Steel Adapter Flareless Bite Fitting Applications <ul><li>Chemical, pulp and paper, oil and gas refineries, military, air compressors and machine tools </li> <li>Well-suited for a variety of processing and general industry hydraulic applications </li> </ul> Use <ul><li>Ideally suited for use with tubing having medium to extra heavy wall thicknesses. </li> <li>Fittings are suitable for sub-zero through elevated temperature applications </li> </ul> Specifications <ul><li>Exceeds Military (MIL F18866) and SAE J514 standards </li> </ul> Features <ul><li>3 piece design including only one ferrule eliminates possible make-up errors that may occur using a twin ferrule tube fitting. </li> <li>Minimal risk of improper assembly as the ferrule visibly bites into the tubing which allows installer to visually inspect the bite quality. </li> </ul> Installation <ul><li>Cut, de-burr and clean tubing </li> <li>Pre-set ferrule onto tubing </li> <li>Inspect ferrule bite in tubing by disassembling the fitting and visually inspecting the de-burred end of the tube for slight indentation. </li> <li>Finger tighten nut and then further wrench tighten nut another 1/3" to 1/2" turn. </li> </ul> Note <ul><li>Temperature rating is limited by the material chosen </li> <li>Pressure ratings are determined by the size (OD) and wall thickness (inches/mm) of the tubing on which they are to be installed </li> </ul>

Dixon, FLC2501-10-06, 5/8" Male Tube OD X 3/8" Male NPTF Steel Adapter 90deg Elbow Applications <ul><li>Chemical, pulp and paper, oil and gas refineries, military, air compressors and machine tools </li> <li>Well-suited for a variety of processing and general industry hydraulic applications </li> </ul> Use <ul><li>Ideally suited for use with tubing having medium to extra heavy wall thicknesses. </li> <li>Fittings are suitable for sub-zero through elevated temperature applications </li> </ul> Specifications <ul><li>Exceeds Military (MIL F18866) and SAE J514 standards </li> </ul> Features <ul><li>3 piece design including only one ferrule eliminates possible make-up errors that may occur using a twin ferrule tube fitting. </li> <li>Minimal risk of improper assembly as the ferrule visibly bites into the tubing which allows installer to visually inspect the bite quality. </li> </ul> Installation <ul><li>Cut, de-burr and clean tubing </li> <li>Pre-set ferrule onto tubing </li> <li>Inspect ferrule bite in tubing by disassembling the fitting and visually inspecting the de-burred end of the tube for slight indentation. </li> <li>Finger tighten nut and then further wrench tighten nut another 1/3" to 1/2" turn. </li> </ul> Note <ul><li>Temperature rating is limited by the material chosen </li> <li>Pressure ratings are determined by the size (OD) and wall thickness (inches/mm) of the tubing on which they are to be installed </li> </ul>

Dixon, FMF1500-90, 90 deg Elbow Female Weld End Metal Hose Fitting Specifications <ul><li>Gauge: .065" </li> <li>Bend Radius: 2.000" </li> </ul> Construction <ul><li>316 seamless stainless steel tubes </li> </ul> Safety notes <ul><li>Pressure rating given at ambient temperature 70°F. </li> </ul>

Dixon, FMGV30-45F45F, Large Diameter Gate Valve Female x Male 30 deg Swivel Applications <ul><li>These gate valves can be used on the suction intake and discharge sides of a pumper or on a hydrant. </li> </ul> Use <ul><li>Needs only 8 easy turns to open and close </li> </ul> Construction <ul><li>High strength aluminum alloy, 356-T6 </li> <li>Finish hardcoat anodized throughout - minimum thickness 0.001" </li> <li>Non-rising stem, with an air bleed off </li> </ul>

Dixon, FSH-9645-25F, 2-1/2" Female Rocker Lug with Shank Swivel Suction Coupling Use <ul><li>Designed for use with Dixon suction hose </li> </ul> Note <ul><li>Hose shank is 3" </li> </ul> Safety notes <ul><li>Designed for use with Dixon Suction hose only. </li> </ul>

Dixon, FSH-9645-60F, Suction Coupling- Female Swivel Rocker Lug with Shank Features <ul><li>Designed for use with Dixon suction hose </li> </ul>

Dixon, FT2005-12, FloTech R/OM Type Overfill & Retain Detection SystemFeatures <ul><li>FloTech R/OM Type Overfill and Retain Red and Black 2 Wire Systems </li> <li>R/OM type, 5 compartment system (overfill and retain) - 12" probes </li> <li>FloTech brand overfill system kits provide everything needed to install a new overfill system on your tank. One to six compartment kits are available from our inventory. Systems include: 1 FT204P monitor, 1 FT202 overfill sensor and 1 FT206 retain sensor per compartment, cable and strain reliefs (cable glands). </li> </ul> Available Options <ul><li>Custom probe lengths are available upon request. </li> </ul> Note <ul><li>Sockets, inline fuse and instruction booklet sold separately </li> </ul>

Dixon, G2030-AA-SS, 2" x 3" 316 Investment Cast Stainless Steel Global Cam & Groove Type AA Spool Adapter Features <ul><li>Designed to interchange with all products produced to A-A-59326D </li> </ul> Applications <ul><li>Designed for use with liquids </li> </ul> Safety notes <ul><li>Under no circumstances should cam and groove couplings be used for compressed air or steam service! </li> <li>Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F / 21°C with a standard seal installed. </li> </ul>

Dixon, H4F4-SS-BOP, 1/2" NPTF DQC H-BOP Series Blowout Prevention Safety Female Plug 316 Stainless Steel Applications <ul><li>Designed specifically for blow-out prevention systems on drilling rigs </li> </ul> Specifications <ul><li>BOP couplings have been fire tested and Lloyd's certified to 700°C (1300°F) in accordance with API 16D. Certificate available upon request </li> <li>Flow ΔP = 22 PSI </li> <li>Lloyd's Test Pressure: 5,000 PSI </li> </ul> Construction <ul><li>Machined components are manufactured using solid 316 stainless steel bar stock </li> <li>Stainless steel balls, retaining rings, and springs maximize corrosion resistance and extend service life </li> <li>Steel components are plated using ROHS Compliant Trivalent Chrome </li> <li>Steel nipples are hardened to provide heavy duty performance and resist brinneling </li> <li>Red powder coated coupler sleeve for easy BOP service identification, locking sleeve is standard </li> <li>Blow-out Prevention (BOP) coupling critical seals are severe service FKM </li> <li>PTFE Anti-Extrusion ring protects main coupling valve seal from dynamic impulse pressure damage </li> <li>Valve seals are crimped in place to maintain integrity during excessive flow conditions and pressurized connection </li> </ul> Compatibility & Interchange Data <ul><li>Eaton/Hansen HKFR-Series </li> </ul>

Dixon, L18-03AMB, 3/8" Wilkerson EconOmist Metal Bowl Compact Lubricator L18Use <ul><li>To adjust and set oil delivery rate the unit must be pressurized and air must be flowing through the unit. Turn the sight dome, located on the top of the unit, counter clockwise to initiate oil delivery. If flow increases or decreases, the oil delivery rate will increase or decrease proportionally. Turning the sight dome clockwise will stop all oil delivery. </li> <li>Can be filled under pressure </li> <li>For all Wilkerson lubricators, use any petroleum-base, non-detergent light weight oil (SAE 10/150 SSU) which will readily break up into a mist, i.e., Mobil DTE light or comparable oil. Do not use any synthetic oil or oils containing additives or solvents. </li> </ul> Features <ul><li>Metal Bowl </li> <li>4.09 oz. bowl </li> <li>Manual drain </li> <li>High flow capacity </li> </ul> Safety notes <ul><li>FRL's are designed for air service only, unless otherwise indicated. </li> <li>SCFM ratings at 150 PSIG inlet pressure </li> </ul>

Dixon, MOC250NYC-P, 2-1/2" Female NPT X 2-1/2" Male NYC Open Snoot Single Male Outlet with Hex Applications <ul><li>Used to connect fire hose to a standpipe or sprinkler system. </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, N36-20T25F, Style N36, Double Male Rocker Lug, 2-1/2" Male NST (NH) x 2" Male NPTConstruction, Hardcoat Aluminum Features: <ul><li>Rocker Lug </li> <li>Seamless aluminum extrusion, hardcoat anodized </li> </ul>

Dixon, N37-20T25F, Style N37 2" FNPT x 2-1/2" MNST Hydrant Adapter Rocker Lug Construction <ul><li>Rocker Lug </li> <li>Seamless aluminum extrusion, hardcoat anodized </li> </ul>

Dixon, NAPRAV250F-55, Factory Set Pressure Reducing Brass Angle Valve Female x Male Use <ul><li>2-1/2" size reduces inlet pressures of 400 PSI (2758 kPa) or less to desired working pressures from 20 through 175 PSI (138-1207 kPa) under discharge or static conditions. </li> </ul> Specifications <ul><li>UL listed for Automatic Sprinkler Systems as floor or zone control valve </li> <li>Standpipe Systems, Class I, II and III </li> <li>Automatic Check Valve for Dual Riser Systems </li> <li>Approved by the New York City Board of Standards and Appeals, approval # MEA 54-07-E </li> <li>Approved by the City of Los Angeles and the City of San Francisco (ULC 2-1/2") </li> </ul> Features <ul><li>Tamper resistant </li> <li>True combination shut-off and pressure reducing valve </li> </ul> Construction <ul><li>Cast brass </li> </ul> Safety notes <ul><li>Dixon Pressure Reducing Valves are automatic valves. Debris is the largest single cause of valve malfunction. It is imperative all debris be flushed from the system prior to being placed into service. </li> <li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, NAPRAVGFT250-75, Factory Set Pressure Reducing Brass Angle Valve Grooved x Female Use <ul><li>2-1/2" size reduces inlet pressures of 400 PSI (2758 kPa) or less to desired working pressures from 20 through 175 PSI (138-1207 kPa) under discharge or static conditions. </li> </ul> Specifications <ul><li>UL listed for Automatic Sprinkler Systems as floor or zone control valve </li> <li>Standpipe Systems, Class I, II and III </li> <li>Automatic Check Valve for Dual Riser Systems </li> <li>Approved by the New York City Board of Standards and Appeals, approval # MEA 54-07-E </li> <li>Approved by the City of Los Angeles and the City of San Francisco (ULC 2-1/2") </li> </ul> Features <ul><li>Tamper resistant </li> <li>True combination shut-off and pressure reducing valve </li> </ul> Construction <ul><li>Cast brass </li> <li>(4) drilled and tapped bosses: two on each side for upstream and downstream pressure monitoring. Saves installation time and provides a cleaner appearance. </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, REP250SP-C, 2-1/2" Round Polished Chrome Standpipe Identification Plate Applications <ul><li>Used to trim out and identify exposed fire department connections. </li> </ul> Construction <ul><li>Hole size: 3-1/4" </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, RFC250F-P, 2-1/2" Female NST (NH) Polished Cast Brass Rocker Lug Cap with Chain Construction <ul><li>Rocker Lug </li> <li>Chain included </li> </ul> Safety notes <ul><li>Not intended for pressure applications - for protection only </li> <li>Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. </li> </ul>

Dixon, RIDP412S-C, Brass Chrome Standpipe Rectangular Identification Plate Features: <ul><li>Used to identify Fire Department Connections </li> </ul>

Dixon, SFBTFLY6040F, Aluminum Storz x Female Swivel Butterfly Valve Applications <ul><li>This valve permits safe controlled flow to the intake pump and can be used in draft situations. </li> </ul> Use <ul><li>This unit can be used in either direction i.e.: inlet/outlet. </li> </ul> Construction <ul><li>ASTN A-126 cast iron cast iron body with standard 10-position locking style lever </li> <li>Body wafer is lightweight aluminum cast 356-T6 </li> <li>3/4" push pull drain valve </li> <li>Buna Seat </li> <li>Finish hardcoat anodized cast aluminum bolt flanges- minimum thickness 0.001" </li> </ul> Note <ul><li>Lever handle to center valve is 10-1/4" </li> </ul>

Dixon, SFMF375-90, 90 deg Elbow Female Weld End Metal Hose Fitting Specifications <ul><li>Gauge: .049" </li> <li>Bend Radius: 0.500" </li> </ul> Construction <ul><li>316 seamless stainless steel tubes </li> </ul> Safety notes <ul><li>Pressure rating given at ambient temperature 70°F. </li> </ul>

Dixon, STBC1265L, 12.20" - 12.77" Long Bolt T-Bolt Clamp Construction <ul><li>300 Series Stainless Steel band and bolt </li> </ul> Installation <ul><li>T-bolt clamps can be applied with a standard 7/16" socket wrench </li> </ul> Safety Notes <ul><li>Not for use with pneumatic tools </li> </ul>

Dixon, SW80-075050, 3/4" Male NPT x 1/2" Male NPT Zinc Plated Schedule 80 Swage Nipple Features <ul><li>Manufactured in conformance with ASTM A234 and MSS SP-95 </li> <li>Threads on nipples conform to ASME B1.20.1 </li> <li>Schedule 80 nipples have green caps </li> </ul>

Dixon, TES-12-12, 3/4" Nominal Smooth Bore PTFE Hose Tube End Stub, Hose Size Dash 12 Features <ul><li>Crimp Collars for all Nominal fittings are included </li> </ul>

Dixon, TYP2501-6, Typhoon Blow Gun w/ 6" Extension Aluminum (1/2" Fem NPT Inlet) Features: <ul><li>Compliant with OSHA Standard 1910.242 (B) </li> <li>Variable flow control </li> </ul> Construction: <ul><li>Chrome plated aluminum body </li> </ul>

Dixon, V12F12-SS, V-Series 2.74" Stainless Steel DQC Snap-Tite H/IH Interchange Valved Female Plug Construction <ul><li>Machined components are manufactured using solid bar stock </li> </ul> Available Options <ul><li>Contact Us for all available option adders </li> <li>Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone </li> <li>Kalrez® seal options include: 4079, 6375 and 7075 </li> <li>Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel </li> <li>Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged </li> <li>Oxy-clean treatment is available </li> </ul> Compatibility & Interchange Data <ul><li>Interchangeable to MIL-C-51234 </li> <li>Snap-Tite H/IH and Faster TNV/TNL </li> </ul> Note <ul><li>Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation </li> </ul>

Dixon, V16F16-SS, V-Series 3.83" Stainless Steel DQC Snap-Tite H/IH Interchange Valved Female Plug Construction <ul><li>Machined components are manufactured using solid bar stock </li> </ul> Available Options <ul><li>Contact Us for all available option adders </li> <li>Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone </li> <li>Kalrez® seal options include: 4079, 6375 and 7075 </li> <li>Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel </li> <li>Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged </li> <li>Oxy-clean treatment is available </li> </ul> Compatibility & Interchange Data <ul><li>Interchangeable to MIL-C-51234 </li> <li>Snap-Tite H/IH and Faster TNV/TNL </li> </ul> Note <ul><li>Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation </li> </ul>

Dixon, V2BF2-B-E, V-Series 0.69" Brass DQC BSPP Snap-Tite H/IH Interchange Unvalved Female Plug Construction <ul><li>Machined components are manufactured using solid bar stock </li> </ul> Compatibility & Interchange Data <ul><li>Interchangeable to MIL-C-51234 </li> <li>Snap-Tite H/IH and Faster TNV/TNL </li> </ul> Note <ul><li>Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation </li> </ul> Safety notes <ul><li>WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling </li> </ul>

Dixon, VEP6F6-BOP, VEP-BOP Series 1.98" DQC Blowout Preventer Safety Female Plug Applications <ul><li>Designed specifically for blow-out preventer systems on drilling rigs </li> </ul> Specifications <ul><li>BOP couplings have been fire tested and Lloyd's certified to 700°C (1300°F) in accordance with API 16D. Certificate available upon request </li> <li>Maximum Impulse Pressure : 8000 PSI (55 MPa) </li> <li>Burst Pressure Connected: 22000 PSI (152 MPa) </li> <li>Burst Pressure Plug: 20000 PSI (138 MPa) </li> <li>Maximum Pressure Connect & Disconnect : 4500 PSI (31 MPa) </li> <li>Lloyd's Test Pressure: 5,000 PSI </li> </ul> Construction <ul><li>Machined components are manufactured using solid steel bar stock </li> <li>Stainless steel retaining rings and springs maximize corrosion resistance and extend service life </li> <li>Steel components are plated using ROHS Compliant Zinc Nickel </li> <li>Red powder coated components and external O-rings for easy BOP service identification </li> <li>Blow-out Preventer (BOP) coupling critical seals are severe service FKM </li> <li>PTFE Anti-Extrusion ring protects main coupling valve seal from dynamic impulse pressure damage </li> </ul> Compatibility & Interchange Data <ul><li>Stucchi VEP/VEP-HD Series </li> <li>DNP FSI-BOP Series </li> </ul> Note <ul><li>Rated Flow ΔP=21.75 PSI </li> </ul>

Dixon, WDH15BK25KAS, 1-1/2" x 25' Black Nitrile Washdown Hose with FNPSH & MNPSH Short Shank Couplings Applications: <ul><li>Ideal for industrial, agricultural and construction washdown and discharge applications. </li> </ul> Features: <ul><li>Resistant to weather and abrasion. </li> </ul> Construction: <ul><li>Coupled with NST (NH) Female and Male KingTM Short Shank Couplings, crimp sleeve, aluminum shank with brass pin lug swivel nut </li> </ul>

Dixon, WS16F16-SS, WS-Series 4.00" Stainless Steel DQC High Pressure Wingstyle Interchange Female Plug Construction <ul><li>Machined components are manufactured using solid 316 stainless steel bar stock </li> <li>Stainless steel retaining rings and springs maximize corrosion resistance and extend service life </li> <li>Steel componentry is plated using ROHS Compliant Zinc Nickel for superior corrosion resistance </li> <li>316 stainless steel nipple connection - threads are coated to prevent galling during connection/disconnection </li> <li>Nitrile (Buna-N) seals are standard, providing a temperature range of -40°F to +250°F (-40°C to +121°C) </li> <li>PTFE anti-extrusion ring protects main coupling O-Ring from dynamic impulse pressure damage </li> <li>Main valve seal is 'housed' to improve seal integrity during pressurized connection/disconnection </li> </ul> Compatibility & Interchange Data <ul><li>Snap-Tite 75-Series, Hydraulics Inc. Series- 5TV, DNP VFF-HD </li> <li>Stucchi VOF, Faster OGV, Eaton FD85, Holmbury LC </li> </ul>

Dixon, XD100-03-IVCD, SureDrop System w/ Internal Valve Controller, 3 Comp & DCM Kit Includes: <ul><li>XD4000- Internal Valve Controller </li> <li>3 Compartment Indicators </li> <li>Wand </li> <li>Charger </li> <li>Harness </li> </ul> SureDrop™ System with XD4000 Valve Controller- 3 Compartment Indicators. The communication module downloads timestamped event data to PC. Applications: <ul><li>The SureDrop™ IVC Internal Valve Controller wirelessly communicates with system components to lock out non-matching compartment internal valves. </li> <li>Product Matching Permit- If the product is matched, the permitted compartment lights green above the air distributor toggle lever and product is dropped as usual. </li> <li>Compartment Lock-Out- Non-permitted compartments are lighted red. Actuating a toggle lever on a non-permitted compartment results in master air shutdown, closing all internal valves. Function is restored by cycling all compartments closed, then opening only permitted compartments. </li> <li>Security- For additional security and load integrity, the IVC allows an internal valve to open only under the following conditions: 1. Loading- Load tag scanned and rack cord connected 2. Drop – UST product tag scanned, elbow tag scanned and product match confirmed </li> <li>Bypass- There are 2 bypass modes available to assure product is always available for delivery: 1. Tag bypass- If a storage tank is not tagged, the bypass tag can be scanned and product is manually selected from the available compartments. 2. System bypass- A key turns the system off, allowing the air distributor to function normally, even if no electric power is available. All events are logged in bypass mode. </li> </ul> Features: <ul><li>Compatible with existing tank trailer components (API's, elbows, and internal valves) </li> <li>Wireless RFID product matching technology </li> <li>Event logging and wireless data reporting </li> <li>Upgradeable system components for additional functions </li> </ul> Construction: <ul><li>RF Scanning wand </li> <li>Charging cradle </li> <li>Compartment indicator </li> <li>Wiring harness </li> <li>Trailer tags </li> </ul>

DM15100GAX, Synthetic Double Jacket Mill Hose 1-1/2" Size, 100 Ft Ideal for open end discharge applications, not intended for fire fighting service Construction: <ul><li>Outer construction: double jacket, all polyester </li> <li>Tube construction: black, PVC rubber </li> </ul>

Doran, APS22500/2424, 2200 Stainless Steel Bench Scale, 500 x 0.1lb, 24" x 24" Features: <ul><li>20" Tall Atlass Column </li> <li>Full functional kaypad </li> </ul> Full Function Keypad The Model 2200 stainless steel digital scale puts you in control of its advanced functions with the intuitive full function keypad. The easy to use keypad allows for simple entry of digital tare, time & date, accumulator, eight product ID's, setpoint outpoints, and values. Simply enter the desired value, press one of the clearly labeled function keys, and the data is entered-putting the power of Doran's 2200 at your fingertips. An optional barcode reader is available to enter data even faster and more accurately. Powerful Software Features Versatile and easy to use, the Model 2200 gives you the power to make the weighing system an integral component of your day to day operation. Standard software features such as programmable data communication, product grading, peak hold, multiple ID numbers, accumulator, and counter, give you the power to effectively manage and monitor your manufacturing process. Advanced Communications and Control Connect, control, and communicate to any device or computer with the two standard RS-232 ports, eight standard outputs, two standard inputs, or a wide range of communication options. Connect with our wired Ethernet, Wireless Ethernet, Modbus/TCP, USB, 4-20mA, RS-485 or Fiber Optic options. Control your process with our optional relays that can be mounted inside the enclosure to provide a turnkey solution. Communicate with the flexible and user definable data strings to include tare, product ID, and time and date. Send your custom data to a barcode label printer or download it directly to an Excel spreadsheet using Doran’s optional Excelerator Data Collection Program. Washdown Safe Superior washdown protection has been engineered into the Model 2200 Advanced Weight Indicator. From the heavy gauge stainless steel to the innovative gasket design, the 2200 meets the NEMA4X and IP69K classification for washdown protection. 1000% Overload Base No...that's not a typo! Our unique "Quad-Spring" design protects the sensitive load cell from shock and overload damage. Protected to a maximum of ten times the base load rating, this design sets the new industry standard - a feature available only from Doran. Take a "peek under the hood" to see what's inside our DXL scale base.

Dual pressure sensors - any two compound or absolute sensors, mix and match as desired. P1 port =-15 to +50 PSIG P2 port = -15 to +3000 PSIG Includes: <ul> <li>Soft carrying case </li> <li>Lead set </li> <li>Batteries </li> <li> SD card </li> <li> USB cable </li> <li>Manual </li> </ul> In continuous production for nearly 25 years, the MeriCal digital pressure transmitter calibrator is one of the most successful instruments to ever serve the process industries. Meriam's NEW M4 Series Handheld Precision Calibrator / Data Logger builds on this reputation with an impressive array of new features, functions and improved accuracy specification! The M400 includes one pressure sensor and one mA/V instrument. Chose from differential, gauge, compound or absolute pressure types and ranges from 10" H2 O to 3000 PSIG full scale. Need two ranges for wider utility? No problem! The M402 can be configured with any two gauge, compound or absolute type sensors. See the table below for all the possibilities. Accuracy is ±0.025% of Full Scale. Accuracy is maintained over operating temperatures from -20° to +50° C (-4° to +122° F). Data Logging is standard on all models. All M4 Series handhelds provide convenient electrical signal measurement and sourcing. Measure ±50V or ±100mA, source 24VDC and measure mA, sink mA, or source precise VDC or mA DC values using the supplied test leads. Accuracy is ±(0.015% of Reading + 0.002 units) over the entire operating temperature range. Source or sink values are easily entered using the Adaptive Interface Wheel. <h3>Impressive Accuracy </h3> <ul> <li>Accuracy is ±.025% of Full Scale </li> <li>Accuracy maintained over wide temperature range </li> <li>Wide variety of pressure options </li> </ul> <h3>Data Logging Capabilities Standard </h3> <ul> <li>Log data to dedicated 4GB SD card and retrieve via USB port </li> <li>Free PC application for creating standard .csv files </li> </ul> <h3>Ease of Use </h3> <ul> <li>Easy to use intuitive interface </li> <li>Large backlight with easy to read display </li> <li>Field updatable via USB </li> </ul>

DuPont, D15123837, TP199TORMD000200 Tychem 6000 FR Coverall, Standard, Orange, MD Size Features: <ul><li>Certified to NFPA 1992 (2018) and NFPA 2112 (2018) </li> <li>Taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered with a strip of compatible chemical-resistant material through heat sealing. </li> <li>Attached respirator-fit hood with drawstring to pull tightly around respirator; longer zipper extends to chin for complete coverage of neck area. </li> <li>Storm flap covers zipper which can be secured by the wearer with rugged hook and loop material to prevent intrusion at zipper </li> <li>Elastic opening for tighter fit at wrist </li> <li>Integrated socks composed of garment material </li> <li>Bright orange color for high visibility </li> </ul> Tychem 6000 FR offers a single layer garment that provides triple hazard protection from liquid-chemical splash, flash fire and electric arc. Tychem 6000 FR garments are designed to combine the trusted chemical protection of Tychem and thermal/arc protection into a single layer garment. Tychem 6000 FR garments are designed to help provide industrial workers and Hazmat responders with permeation protection against a broad range of toxic industrial chemicals and chemical warfare agents and to provide escape time from flash fires and protection from electric arc. Tychem 6000 FR fabric provides at least eight hours breakthrough protection against 17 of the 21 standard ASTM F1001 chemicals and at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents. The arc rating of Tychem 6000 FR fabric is 15 cal/cm^2 Ebt. This exceeds the NFPA 70E Hazard Risk Category 2 requirement of 8 cal/cm^2. Applications: HazMat Teams in Fire Departments, Industrial Fire Brigades, Clandestine Lab Investigation, Industrial Chemical Processing Plants, Laboratories. <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Case of 2 pcs </td> </tr> </table>

DuPont, IC181SWH2X002500, IsoClean® Serged Seams, Standard Collar, Set Sleeve Design, Elastic Wrists and Ankles, Zipper Closure, White, 2 Extra Large Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek® provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash. Features <ul><li>Serged seams have multiple interlocking threads that are sewn around the raw edges of garment material to create a strong, stress-resistant seam </li> <li>Standard collar </li> <li>Set sleeve </li> <li>Elastic wrists & ankles </li> <li>Zipper closure </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Case of 25 pcs </td> </tr> </table>

DuPont, IC263SWH3X00300B, IsoClean® Frock, Serged Seams, High Mandarin Collar with Snap, Set Sleeve Design, Elastic Wrists, Front Snap Closure, White, 3 Extra Large Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek® provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash. Features <ul><li>Serged seams have multiple interlocking threads that are sewn around the raw edges of garment material to create a strong, stress-resistant seam </li> <li>High mandarin collar w/snap </li> <li>Set sleeve </li> <li>Elastic wrist </li> <li>Snap closure (6) </li> <li>White </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Case of 30 pcs </td> </tr> </table>

DuPont, IC447SWHMD0100CS IsoClean® Boot Cover, Sterile, Clean-Processed, Serged Seams, Gripper™ Sole, Elastic Opening, Elastic Ankles, 18" High, White, Medium Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek® provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash. Features <ul><li>Serged seams have multiple interlocking threads that are sewn around the raw edges of garment material to create a strong, stress-resistant seam </li> <li>Elastic opening </li> <li>Elastic ankle </li> <li>Gripper™ sole </li> <li>18" high </li> <li>Garments are gamma sterilized to SAL of 10-6 </li> <li>Clean-processed garments offer lowest level of particle shedding within DuPont product portfolio </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Case of 100 pcs </td> </tr> </table>

DuPont, IC451SWHXL0100OB, IsoClean® Shoe Cover, Serged Seams, Gripper™ Sole, Elastic Opening, 5" High, White, Extra Large Tyvek® IsoClean® delivers an ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek® provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash. Features <ul><li>Serged seams have multiple interlocking threads that are sewn around the raw edges of garment material to create a strong, stress-resistant seam </li> <li>Elastic opening </li> <li>Gripper™ sole </li> <li>5" high </li> <li>White </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Case of 100 pcs </td> </tr> </table>

DuPont, RC128TTNLG000100, Tychem® RESPONDER® CSM Coverall, Respirator Fit Hood, Attached Gloves, Butyl (Mil Spec.), Attached Socks with Outer Boot Flaps, Double Storm Flap with Hook and Loop Closure, Double Taped Seams, Tan, Large Tychem® RESPONDER® CSM combines multiple film barriers laminated to both sides of a high-strength polypropylene substrate for high level protection against toxic and corrosive chemicals. It is effective for handling chemical warfare agents as well as military site cleanup and HazMat first response. Tychem® RESPONDER® CSM fabric provides at least 30 minutes of protection against 320 chemical challenges. Each suit undergoes rigorous inspection and each Level A suit, pressure testing. Each fabric lot is tested using live toxic agents plus one garment for each test fabric production run is also tested for seam barrier with live toxic agents. Desert tan color for low visibility applications. Features <ul><li>Double taped seams </li> <li>Attached hood </li> <li>Front zipper closure </li> <li>Double storm flap with hook-and-loop closure </li> <li>Attached butyl gloves (mil. spec. glove) with attached conical cuff for jam fit </li> <li>Attached socks </li> <li>Outer boot flaps </li> </ul>

DuPont, SL122BWH3X001200, Tychem 4000 Coverall w/ Hood, Elastic Wrists, Att. Socks, Bound, 3XL Effective protection against a range of chemicals. Uses include waste management, hazardous response and nuclear environments. Tychem® 4000 is white for high visibility, Tychem® 4000 provides at least 30 minutes of protection against >120 chemical challenges. When used with other PPE, can help reduce the risk of cross-contamination in pandemic preparedness activities. Meets ASTM F1670 and ASTM F1671 tests, offering bloodborne pathogen protection <ul><li>Bound seams are covered with garment fabric to reinforce the seam and to reduce the potential for particle penetration </li> <li>Attached hood </li> <li>Front zipper closure </li> <li>Storm flap with tape closure </li> <li>Elastic wrists </li> <li>Attached socks </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Case of 12 pcs </td> </tr> </table>

DuPont, SL125TWH4X000600, Tychem 4000 Coverall, Collar, Elastic Wrists and Ankles, Storm Flap, Taped, 4XL DuPont™ Tychem® 4000 delivers effective protection against a range of chemical environments. Tychem® 4000, utilizes Saranex™ 23-P film laminated to Tyvek® fabric to provide a rugged and durable fabric that resists abrasion. Tychem® 4000 fabric provides at least 30 minutes of protection against >124 chemical challenges. Typical applications: chemical mixing, hazardous remediation, emergency medical response, paint spraying, and nuclear environments. Features <ul><li>Taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered with a strip of compatible chemical-resistant material through heat sealing </li> <li>Collar </li> <li>Front zipper closure </li> <li>Storm flap with tape closure </li> <li>Elastic wrists </li> <li>Elastic ankles </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Case of 6 pcs </td> </tr> </table>

DuPont, TK555TLYMD000100, Tychem® 10000 Encapsulated Level A Suit, Expanded Back, Rear Entry, Extra-Wide Visor, 3 Layers: 40 Mil PVC / Teflon® 5 Mil / 20 Mil PVC, Attached Dual Layer Gloves, Internal: Multi-layer laminate / External: Butyl, Attached Socks with Outer Boot Flaps, Double Storm Flap with Hook and Loop Closure, Two Exhaust Valves, Double Taped Seams, Lime Yellow, Large Tychem® 10000 exhibits excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant. Tychem® 10000 fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough. Tychem® 10000 is specifically developed for protection against toxic, corrosive gases, liquids and solid chemicals. This high-performance chemical barrier fabric is suited for industrial, HazMat, and domestic preparedness applications. Features <ul><li>Rear entry </li> <li>Double taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered, both inside and outside of garment with compatible chemical-resistant material by heat-sealing </li> <li>Expanded faceshield provides wide 220 degree viewing angle. EX faceshield is three-layer laminate composed of 40 Mil PVC/5 Mil Teflon® /20 Mil PVC </li> <li>Gas-tight PVC zipper closure </li> <li>Double storm flaps with hook-and-loop closure </li> <li>Two exhaust vents </li> <li>Expanded back </li> <li>Internal adjustment belt </li> <li>Attached internal multi-layer laminate gloves </li> <li>Attached outer butyl or Viton™ gloves </li> <li>Knee wear pads </li> <li>Attached socks </li> <li>Outer boot flaps with elastic </li> </ul>

Duro United, 4102-2411-CERT, 10-Series 4-1/2" Process Gauge Style #2, 30" - 0-100 psi 1/4" NPT Bottom This series is designed for use with air, gas and water or any medium not corrosive to brass or bronze. Features: <ul><li>Dial: Heavy gauge aluminum. </li> <li>Connection: Brass machined connection with wrench flats, </li> <li>1/4" NPT male. </li> <li>Accuracy: ASME/ANSI B40.1 Grade 1A (1%) </li> </ul>

Duro United, 4131-5711-CERT, Series 13 0-300 psi, 4-1/2" Altitude Gauge with Case #1, 1/4 NPT Bottom This series is designed for use in indicating height of water in tanks, stand pipes, reservoirs, or hot water heating systems. Features: <ul><li>Movement: Sturdy corrosive resistant bronze bushed rotary type movement with bronze links and stainless steel link screws. </li> <li>Pointer: Lightweight balanced construction with adjustment feature and adjustable red set hand. </li> <li>Dial: Heavy gauge aluminum. 4-1/2" </li> <li>Window: Glass </li> <li>Connection: Brass machined connection with wrench flats, 1/4" NPT male connection at bottom of case. </li> <li>Accuracy: ASME/ANSI B40.1 Grade 1A (1%) </li> </ul>

Duro United, 4142-6411-CERT, Series 14 300psi, 4-1/2" Refrigeration Gauge w/ Case #2, 1/4 Bottom, BR This series is designed for use by refrigeration engineers requiring high quality gauges for use with refrigerants that are non-corrosive to bronze Features: <ul><li>Movement: Sturdy corrosive resistant bronze bushed rotary type movement with bronze links and stainless steel link screws. </li> <li>Pointer: Lightweight balanced construction with adjustment feature. </li> <li>Dial: Heavy gauge aluminum. 4-1/2" </li> <li>Window: Glass </li> <li>Connection: Brass machined connection with wrench flats, 1/4" NPT male connection at bottom of case. </li> <li>Accuracy: ASME/ANSI B40.1 Grade 1A (1%) </li> </ul>

Duro United, 6102-0621-CERT, Series 10 0-160 psi, 6" General Service Gauge with Case #2, 1/4 NPT Back This series is designed for use with air, gas and water or any medium not corrosive to brass or bronze. Features: <ul><li>Movement: Sturdy corrosive resistant bronze bushed rotary type movement with bronze links and stainless steel link screws. </li> <li>Pointer: Lightweight balanced construction with adjustment feature. </li> <li>Dial: Heavy gauge aluminum. </li> <li>Window: Glass </li> <li>Connection: Brass machined connection with wrench flats, 1/4" NPT male. Connection at back of case. </li> <li>Accuracy: ASME/ANSI B40.1 Grade 1A (1%) </li> </ul>

Duro United, 6156-6323-CERT, Series 15 6" Ammonia Gauge 30"-0-150 PSI 1/4" NPT Back SS Style 6 This is designed for use on installations on ammonia tanks, or anywhere ammonia is used. Features <ul><li>Stainless steel rotary geared movement with dissimilar stainless steel bushings and stainless steel link and screws. </li> <li>Lightweight balanced construction with adjustment feature. </li> <li>Heavy gauge aluminum. Temperature for saturated ammonia in red. 6” Size </li> <li>Window glass </li> <li>316 stainless steel machined connection with wrench flats, NPT male connection at bottom or back of case. </li> <li>ASME/ANSI B40.1 Grade 1A (1%) </li> </ul>

Dwyer Instruments, 3000-125PA, 3000 Photohelic Pressure Switch / Gage, 0 - 125 Pa The Photohelic Switch / Gage is a very versatile, precise pressure switch combined with the time-proven Magnehelic pressure gage. Gage reading is unaffected by switch operation. Easy to adjust set points have knob controls. Applied pressure and switch set points are fully visible at all times. Deadband is one pointer width - less than 1% of full scale. Full scale ranges available from 0 - .25 in w.c. to 0-6000 psig.

Dwyer Instruments, 49-253SS-1, Protective Stainless Steel Well Assembly for D Series

Dwyer, 4000-300CM, Series 4000 Capsuhelic Differential Pressure Gage, 0-300 cm w.c. The Capsuhelic® gage is designed to give fast, accurate indication of differential pressures. The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. Using the basic design of Dwyer's time-proven Magnehelic® gage, the Capsuhelic® gage contains a simple, frictionless movement that permits full scale readings as low as 0.5 in w.c. The pressure being measured is held within a capsule which is an integral part of the gage. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c. The diaphragm-actuated Capsuhelic® gage requires no filling liquid which might limit its outdoor applications. Zero and range adjustments are made from outside the gage, and there is no need to disassemble the gage in normal service. Approvals GOST-R Certificate Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.