<p><strong>Fein, 63134158025, 5/8" x 3/4" HSS Nova Annular Cutter with Weldon Shank </strong> </p> <p><strong>Features: </strong> </p> <ul><li>Long service life. </li> <li>Inch sizes, drilling depth 3/4 in. </li> <li><strong>Fits: </strong> JCM 200 Q-1, JCM 200 U, JCM 200 auto, JCM 256 U, JHM ShortSlugger, JHM Holemaker II, JHM USA 101, JHM Magforce, JHM USA 5, JHM 4 x 4 </li> </ul>
<p><strong>Fein, 63134476008, 1-7/8" x 2" HSS Prima Annular Cutter with Weldon Shank </strong> </p> <p><strong>Features: </strong> </p> <ul><li>Cobalt steel for extended service life and increased feed rates </li> <li>Inch sizes, drilling depth 2 in. </li> <li><strong>Fits: </strong> JCM 200 Q-1, JCM 200 U, JCM 200 auto, JHM ShortSlugger, JHM Holemaker II, JHM USA 101, JHM Magforce, JHM USA 5, JHM 4 x 4 </li> </ul>
<p><strong>Fein, 63502114210, 3" Dia. SL Mount Dia-Mond Saw Blade for Working in Corners & on Edges </strong> </p> <p><strong>Features: </strong> </p> <ul><li>For the removal of marble, epoxy resin and pozzolan grouts. Outstanding tool life. Also suitable for very hard epoxy or cement grouts. The right choice for frequent use and demanding tasks. </li> <li>Segmented, ideal for working in corners and on edges without over cut. Kerf approx. 3/32 in. </li> <li>Fits: AFSC 18 QCSL, AFSC 18 QSL, FSC 500 QSL, FEIN cordless MultiTalent QuickStart, FEIN MultiMaster Cordless, FEIN MultiMaster Top, FEIN MultiMaster Start Q, FEIN MultiMaster QuickStart, FEIN MultiTalent Start Q, FEIN Professional-Set Wood, AFSC 18 QSL - Wood, FEIN Professional-Set Caulking </li> </ul>
<p><strong>Fein, 63502217230, 3-9/16" Dia. SLP Mount Dia-Mond Saw Blade, Pack of 5 pcs </strong> </p> <p><strong>Features: </strong> </p> <ul><li>For the removal of marble, epoxy resin and pozzolan grouts. Outstanding tool life. Also suitable for very hard epoxy or cement grouts. The right choice for frequent use and demanding tasks. </li> <li>Extra thin version. Kerf approx. 1/16 in.Segmented, ideal for working in corners and on edges without over cut. </li> <li><strong>Fits: </strong> AFSC 18 QCSL, AFSC 18 QSL, FSC 500 QSL, FEIN cordless MultiTalent QuickStart, FEIN MultiMaster Cordless, FEIN MultiMaster Top, FEIN MultiMaster Start Q, FEIN MultiMaster QuickStart, FEIN MultiTalent Start Q, FEIN Professional-Set Wood, AFSC 18 QSL - Wood, FEIN Professional-Set Caulking </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 5 pcs </td> </tr> </table>
<p><strong>Fein, 63717188011, 120 Grit Sanding Sheet for Sanding Fingers, Pack fo 20 pcs </strong> </p> <p><strong>Features: </strong> </p> <ul><li>With H&L, full synthetic resin bonding, high performance, aluminum oxide. </li> <li>Applications, wood, metal, solder joints, GFRP, plastic, paint, filler and leather. </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 20 pcs </td> </tr> </table>
<p><strong>FLST-O18X24 Series FLST Duct Mounted Airflow Measurement Station, Flow Station Size (Diameter or Height X Width) - 18" X 24" </strong> </p> <p>Oval Configurations </p> <p><strong>Options </strong> </p> <ul><li>IM - Internal Pressure Connections. </li> <li>F - (Oval Stations Only). </li> </ul> <p><strong>The Series FLST Airflow Measurement Station </strong> is easy to install - simply connect the tubing to the station fittings, then to a differential pressure manometer, gage, transmitter or switch. Single or multiple airflow elements are factory mounted and pre-piped in a casing designed for flanged connection to the duct work. Standard materials consist of a G90 galvanized casing and 6063-T5 anodized aluminum flow sensors, suitable for most HVAC applications. </p> <p>The Series FLST utilizes an airflow averaging element in a head-type device, generating a differential (velocity) pressure signal similar to the orifice, venturi, and other had producing primary elements. Strategically located sensing ports continually sample the total and static pressures when inserted normal to flow. </p> <p>Total pressure sensed by the upstream ports are continually averaged within the airflow element in an isolated chamber. The static sensing ports are averaged in a second isolation chamber. Multiple elements are joined together for connection to a differential measurement device (gage, transmitter, etc.) for flow measurement and indication purposes. </p> <p><strong>Features </strong> </p> <ul><li>Low signal-to-noise ratio. </li> <li> Multiple total and static pressure sensing ports along the length of the element. </li> <li> Factory mounted and pre-piped in a flanged duct section (casing). </li> <li> ±2% accuracy throughout velocity ranges of 100 fpm and over. </li> <li> Standard construction includes galvanized casing and 6063-T5 anodized aluminum flow sensors. </li> <li> Standard airflow stations can be operated (in air) continuously in temperatures up to 350°F or intermittently in temperatures up to 400°F. </li> <li> All airflow stations can be operated in humidity ranges of 0 to 100%. </li> <li> Standard airflow stations have good salt air resistance and are suitable for most HVAC applications. </li> </ul> <p><strong>Applications </strong> </p> <ul><li>Sensing fan, blower, and air handler output. </li> <li> Determine duct flow rates in various zones in builiding. </li> </ul>
<p><strong>FLST-R12X40 Series FLST Duct Mounted Airflow Measurement Station, Flow Station Size (Diameter or Height X Width) - 12" X 40" </strong> </p> <p>Rectangular Configurations </p> <p><strong>Options </strong> </p> <ul><li>IM - Internal Pressure Connections. </li> </ul> <p><strong>The Series FLST Airflow Measurement Station </strong> is easy to install - simply connect the tubing to the station fittings, then to a differential pressure manometer, gage, transmitter or switch. Single or multiple airflow elements are factory mounted and pre-piped in a casing designed for flanged connection to the duct work. Standard materials consist of a G90 galvanized casing and 6063-T5 anodized aluminum flow sensors, suitable for most HVAC applications. </p> <p>The Series FLST utilizes an airflow averaging element in a head-type device, generating a differential (velocity) pressure signal similar to the orifice, venturi, and other had producing primary elements. Strategically located sensing ports continually sample the total and static pressures when inserted normal to flow. </p> <p>Total pressure sensed by the upstream ports are continually averaged within the airflow element in an isolated chamber. The static sensing ports are averaged in a second isolation chamber. Multiple elements are joined together for connection to a differential measurement device (gage, transmitter, etc.) for flow measurement and indication purposes. </p> <p><strong>Features </strong> </p> <ul><li>Low signal-to-noise ratio. </li> <li> Multiple total and static pressure sensing ports along the length of the element. </li> <li> Factory mounted and pre-piped in a flanged duct section (casing). </li> <li> ±2% accuracy throughout velocity ranges of 100 fpm and over. </li> <li> Standard construction includes galvanized casing and 6063-T5 anodized aluminum flow sensors. </li> <li> Standard airflow stations can be operated (in air) continuously in temperatures up to 350°F or intermittently in temperatures up to 400°F. </li> <li> All airflow stations can be operated in humidity ranges of 0 to 100%. </li> <li> Standard airflow stations have good salt air resistance and are suitable for most HVAC applications. </li> </ul> <p><strong>Applications </strong> </p> <ul><li>Sensing fan, blower, and air handler output. </li> <li> Determine duct flow rates in various zones in builiding. </li> </ul>
<p><strong>FLST-R14X30 Series FLST Duct Mounted Airflow Measurement Station, Flow Station Size (Diameter or Height X Width) - 14" X 30" </strong> </p> <p>Rectangular Configurations </p> <p><strong>Options </strong> </p> <ul><li>IM - Internal Pressure Connections. </li> </ul> <p><strong>The Series FLST Airflow Measurement Station </strong> is easy to install - simply connect the tubing to the station fittings, then to a differential pressure manometer, gage, transmitter or switch. Single or multiple airflow elements are factory mounted and pre-piped in a casing designed for flanged connection to the duct work. Standard materials consist of a G90 galvanized casing and 6063-T5 anodized aluminum flow sensors, suitable for most HVAC applications. </p> <p>The Series FLST utilizes an airflow averaging element in a head-type device, generating a differential (velocity) pressure signal similar to the orifice, venturi, and other had producing primary elements. Strategically located sensing ports continually sample the total and static pressures when inserted normal to flow. </p> <p>Total pressure sensed by the upstream ports are continually averaged within the airflow element in an isolated chamber. The static sensing ports are averaged in a second isolation chamber. Multiple elements are joined together for connection to a differential measurement device (gage, transmitter, etc.) for flow measurement and indication purposes. </p> <p><strong>Features </strong> </p> <ul><li>Low signal-to-noise ratio. </li> <li> Multiple total and static pressure sensing ports along the length of the element. </li> <li> Factory mounted and pre-piped in a flanged duct section (casing). </li> <li> ±2% accuracy throughout velocity ranges of 100 fpm and over. </li> <li> Standard construction includes galvanized casing and 6063-T5 anodized aluminum flow sensors. </li> <li> Standard airflow stations can be operated (in air) continuously in temperatures up to 350°F or intermittently in temperatures up to 400°F. </li> <li> All airflow stations can be operated in humidity ranges of 0 to 100%. </li> <li> Standard airflow stations have good salt air resistance and are suitable for most HVAC applications. </li> </ul> <p><strong>Applications </strong> </p> <ul><li>Sensing fan, blower, and air handler output. </li> <li> Determine duct flow rates in various zones in builiding. </li> </ul>
<p><strong>FLST-R18X108 Series FLST Duct Mounted Airflow Measurement Station, Flow Station Size (Diameter or Height X Width) - 18" X 108" </strong> </p> <p>Rectangular Configurations </p> <p><strong>Options </strong> </p> <ul><li>IM - Internal Pressure Connections. </li> </ul> <p><strong>The Series FLST Airflow Measurement Station </strong> is easy to install - simply connect the tubing to the station fittings, then to a differential pressure manometer, gage, transmitter or switch. Single or multiple airflow elements are factory mounted and pre-piped in a casing designed for flanged connection to the duct work. Standard materials consist of a G90 galvanized casing and 6063-T5 anodized aluminum flow sensors, suitable for most HVAC applications. </p> <p>The Series FLST utilizes an airflow averaging element in a head-type device, generating a differential (velocity) pressure signal similar to the orifice, venturi, and other had producing primary elements. Strategically located sensing ports continually sample the total and static pressures when inserted normal to flow. </p> <p>Total pressure sensed by the upstream ports are continually averaged within the airflow element in an isolated chamber. The static sensing ports are averaged in a second isolation chamber. Multiple elements are joined together for connection to a differential measurement device (gage, transmitter, etc.) for flow measurement and indication purposes. </p> <p><strong>Features </strong> </p> <ul><li>Low signal-to-noise ratio. </li> <li> Multiple total and static pressure sensing ports along the length of the element. </li> <li> Factory mounted and pre-piped in a flanged duct section (casing). </li> <li> ±2% accuracy throughout velocity ranges of 100 fpm and over. </li> <li> Standard construction includes galvanized casing and 6063-T5 anodized aluminum flow sensors. </li> <li> Standard airflow stations can be operated (in air) continuously in temperatures up to 350°F or intermittently in temperatures up to 400°F. </li> <li> All airflow stations can be operated in humidity ranges of 0 to 100%. </li> <li> Standard airflow stations have good salt air resistance and are suitable for most HVAC applications. </li> </ul> <p><strong>Applications </strong> </p> <ul><li>Sensing fan, blower, and air handler output. </li> <li> Determine duct flow rates in various zones in builiding. </li> </ul>
<p><strong>FLST-R22X60 Series FLST Duct Mounted Airflow Measurement Station, Flow Station Size (Diameter or Height X Width) - 22" X 60" </strong> </p> <p>Rectangular Configurations </p> <p><strong>Options </strong> </p> <ul><li>IM - Internal Pressure Connections. </li> </ul> <p><strong>The Series FLST Airflow Measurement Station </strong> is easy to install - simply connect the tubing to the station fittings, then to a differential pressure manometer, gage, transmitter or switch. Single or multiple airflow elements are factory mounted and pre-piped in a casing designed for flanged connection to the duct work. Standard materials consist of a G90 galvanized casing and 6063-T5 anodized aluminum flow sensors, suitable for most HVAC applications. </p> <p>The Series FLST utilizes an airflow averaging element in a head-type device, generating a differential (velocity) pressure signal similar to the orifice, venturi, and other had producing primary elements. Strategically located sensing ports continually sample the total and static pressures when inserted normal to flow. </p> <p>Total pressure sensed by the upstream ports are continually averaged within the airflow element in an isolated chamber. The static sensing ports are averaged in a second isolation chamber. Multiple elements are joined together for connection to a differential measurement device (gage, transmitter, etc.) for flow measurement and indication purposes. </p> <p><strong>Features </strong> </p> <ul><li>Low signal-to-noise ratio. </li> <li> Multiple total and static pressure sensing ports along the length of the element. </li> <li> Factory mounted and pre-piped in a flanged duct section (casing). </li> <li> ±2% accuracy throughout velocity ranges of 100 fpm and over. </li> <li> Standard construction includes galvanized casing and 6063-T5 anodized aluminum flow sensors. </li> <li> Standard airflow stations can be operated (in air) continuously in temperatures up to 350°F or intermittently in temperatures up to 400°F. </li> <li> All airflow stations can be operated in humidity ranges of 0 to 100%. </li> <li> Standard airflow stations have good salt air resistance and are suitable for most HVAC applications. </li> </ul> <p><strong>Applications </strong> </p> <ul><li>Sensing fan, blower, and air handler output. </li> <li> Determine duct flow rates in various zones in builiding. </li> </ul>
<p><strong>Folded Towel Dispenser w/ 12Gal Waste Container, Surface-Mounted </strong> </p> <p><strong>Product Materials: </strong> </p> <ul><li>CABINET: 0.030-inch/22-ga. (0.76 mm) stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless corners and burr-free edges. </li> <li>FLANGE: 0.030-inch/22-ga. (0.76 mm) stainless steel with exposed surfaces in architectural satin finish. One piece seamless construction, 1" wide with ¼" return. </li> <li>DOORS: 0.036-inch/20-ga. (0.92 mm) stainless steel with full length piano hinge and tumbler lock keyed like other Bradley units. Front of door has matching curvature to other Bradley Diplomat washroom accessories. </li> <li>TOWEL DISPENSER: 0.030-inch/22-ga. (0.76 mm) stainless steel with exposed surfaces in architectural satin finish. Rolled edge on towel dispenser opening. </li> <li>WASTE CONTAINER: 0.036-inch/20-ga. (0.92 mm) stainless steel with exposed surfaces in architectural satin finish. All welded construction. Secured to cabinet with tumbler lock keyed like other Bradley units. Front of cabinet has matching curvature to other Bradley Diplomat washroom accessories. </li> </ul> <p><strong>Capacity: </strong> </p> <ul><li>Towel Dispenser - 800 multi fold or 600 C-fold paper towels. Waste Container - 12 gal. (1.6 cu. ft.) </li> </ul> <p><strong>Operation: </strong> </p> <ul><li>Towel dispenser holds multi-fold or C-fold towels without use of special adapter. Receptacle removable for servicing by unlocking waste container. Operates with less than 5 lbs. of force. </li> </ul> <p><strong>Installation: </strong> </p> <ul><li>Verify all rough-in dimensions prior to installation. Recessed unit requires rough wall opening 15-3 ⁄4"W x 54-1 ⁄2"H x 4"D (Semi-recessed unit only 2" deep). Secure to framing with mounting screws (not included) at holes provided. Shim at screw points as required. Surface mounted units must have holes drilled by installer. </li> </ul> <p><strong>Guide: </strong> </p> <ul><li>Folded paper towel dispenser and 12 gal. /1.6 cu. ft. capacity waste receptacle in [recessed] [semi-recessed] [surface-mounted] wall cabinet. Towel dispenser door and waste receptacle faces formed with contemporary contours, radii, and finish matching related accessories in manufacturer's designer series. Towel dispenser capacity 800 multi-fold or 600 C-fold paper towels, accessed with hinged service door with keyed tumbler lock. Dispenses using less than 5 lbs. of force. Waste receptacle removable from cabinet with keyed tumbler lock. Universal keying. Formed from stainless steel sheet with satin finish on exposed surfaces, fully welded, with seamless corners and burr-free edges: cabinet and flange 0.030-inch/22-ga. thick; door and waste receptacle 0.036-inch/20-ga. thick. </li> <li>Overall dimensions: 171 ⁄8"W x 56"H x 811⁄16"D. </li> <li>MasterFormat Title: Commercial Toilet Accessories </li> <li>MasterFormat Number: 10 28 13.13 </li> <li>OmniClass Title: Toilet and Bath Specialties </li> <li>OmniClass Code: 23.31.25.0 </li> </ul> <p><strong>Folded Towel Dispenser w/ 12Gal Waste Container, Surface-Mounted </strong> </p> <p><strong>Product Materials: </strong> </p> <ul><li>CABINET: 0.030-inch/22-ga. (0.76 mm) stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless corners and burr-free edges. </li> <li>FLANGE: 0.030-inch/22-ga. (0.76 mm) stainless steel with exposed surfaces in architectural satin finish. One piece seamless construction, 1" wide with ¼" return. </li> <li>DOORS: 0.036-inch/20-ga. (0.92 mm) stainless steel with full length piano hinge and tumbler lock keyed like other Bradley units. Front of door has matching curvature to other Bradley Diplomat washroom accessories. </li> <li>TOWEL DISPENSER: 0.030-inch/22-ga. (0.76 mm) stainless steel with exposed surfaces in architectural satin finish. Rolled edge on towel dispenser opening. </li> <li>WASTE CONTAINER: 0.036-inch/20-ga. (0.92 mm) stainless steel with exposed surfaces in architectural satin finish. All welded construction. Secured to cabinet with tumbler lock keyed like other Bradley units. Front of cabinet has matching curvature to other Bradley Diplomat washroom accessories. </li> </ul> <p><strong>Capacity: </strong> </p> <ul><li>Towel Dispenser - 800 multi fold or 600 C-fold paper towels. Waste Container - 12 gal. (1.6 cu. ft.) </li> </ul> <p><strong>Operation: </strong> </p> <ul><li>Towel dispenser holds multi-fold or C-fold towels without use of special adapter. Receptacle removable for servicing by unlocking waste container. Operates with less than 5 lbs. of force. </li> </ul> <p><strong>Installation: </strong> </p> <ul><li>Verify all rough-in dimensions prior to installation. Recessed unit requires rough wall opening 15-3 ⁄4"W x 54-1 ⁄2"H x 4"D (Semi-recessed unit only 2" deep). Secure to framing with mounting screws (not included) at holes provided. Shim at screw points as required. Surface mounted units must have holes drilled by installer. </li> </ul> <p><strong>Guide: </strong> </p> <ul><li>Folded paper towel dispenser and 12 gal. /1.6 cu. ft. capacity waste receptacle in [recessed] [semi-recessed] [surface-mounted] wall cabinet. Towel dispenser door and waste receptacle faces formed with contemporary contours, radii, and finish matching related accessories in manufacturer's designer series. Towel dispenser capacity 800 multi-fold or 600 C-fold paper towels, accessed with hinged service door with keyed tumbler lock. Dispenses using less than 5 lbs. of force. Waste receptacle removable from cabinet with keyed tumbler lock. Universal keying. Formed from stainless steel sheet with satin finish on exposed surfaces, fully welded, with seamless corners and burr-free edges: cabinet and flange 0.030-inch/22-ga. thick; door and waste receptacle 0.036-inch/20-ga. thick. </li> <li>Overall dimensions: 171 ⁄8"W x 56"H x 811⁄16"D. </li> <li>MasterFormat Title: Commercial Toilet Accessories </li> <li>MasterFormat Number: 10 28 13.13 </li> <li>OmniClass Title: Toilet and Bath Specialties </li> <li>OmniClass Code: 23.31.25.0 </li> </ul>
<p><strong>Fowler, 52-548-013-0, 12.5 - 22 mm Precision Mechanical Cylinder Bore Gage, .002 mm Dial Reading </strong> </p> <p>Fowler/Bowers Cylinder Bore Gages have been built on the Bowers' reputation for quality…a fast, accurate method for checking bores. Originally designed for enginere bore use, these bore gages have since been developed into a universal,wide range, two point internal measuring system suitable for many applications. </p> <p>An improved mechanical system increases its strength and wear resistance. All contact points are tungsten carbide. Robust, easy to use and suitable for most environments and applications. </p> <p>Set the gage with a setting ring or gage blocks by rotating the dial face to zero. During measurement, the gage is inserted into the bore at an angle and then rocked slowly to enable a reading to be taken. A spring loaded centralizing foot ensures that the gage remains on center during measuring operation when the minimum reading gives the bore size. </p> <p><strong>Features </strong> </p> <ul><li>Fast, simple checking of bores for size, ovality, taper, etc. </li> <li> Lightweight housing for extra strength and protection. </li> <li> Thermally insulated for extra stability. </li> <li> Tungsten carbide contact points. </li> <li> Specials available for measurement of deep bores. </li> </ul>
<p><strong>Foxx Life Sciences, 205-0318-RLS, VersaCap, 53B, with 2x 1/4" Molded In HB Adapter </strong> </p> <p>Patented VersaCap is leak-proof, has replaceable platinum-cured silicone gaskets, and provides the ultimate in top-connection flexibility. Open VersaCap is compatible with a variety of adapter inserts, enabling users to quickly change the top connections of each carboy or bottle to match their application needs. VersaCap offers large handles with finger grips that allow for easy tightening and opening. They are also stackable and are offered in 53mm, 83mm (compatible with most carboys), and 120mm wide-mouth versions that fit exclusively on Foxx Life Sciences 20L, 40L, and 75L EZfil carboys.Quick-connect hose barb options include quick-connect port combinations of two, three, and four, with 1/4" and 3/8" hose barb sizes, as well as molded-in hose barb options, available with 1/8", 1/4", 5/16", and 1/2" sizes. The Clearview adapter is also available for users who need a crystal-clear window into the carboy for visualizing solution homogenization. </p> <ul><li>Quick-connect adapters available for easy port changes </li> <li>Made from Class VI autoclavable polypropylene </li> <li>Leak-proof with replaceable platinum-cured silicone gasket </li> </ul> <p>VersaCap are made from polypropylene, which may be autoclaved at 15 PSI and 121 deg. for 20 minutes. </p>
<p><strong>Foxx Life Sciences, 250-2304-FLS, EZWaste Safety Vent Filter, with Indicator, 1/4-28 Thread </strong> </p> <p>Universal 1/4-28 connection exhaust Chemical Exhaust Filter rids the ambient air of volatile compounds known to adversely affect health and safety. The large capacity 65g absorbent component filters out nearly all evaporating organic solvent vapors. The optional qualitative colorimetric indicator recognizes trace amounts of acetone, acetonitrile, aliphatic and aromatic hydrocarbons, ethanol, ethyl acetate, methanol, methylene chloride, and THF. Designed to provide real-time indication of the breakthrough of vapors, when the absorbent is saturated, a color change in the detector from orange/pink to dark purple. A small charcoal filter absorbs the vapors after they pass the detector making this both an ideal and necessary safety addition to the laboratory. </p> <table cellspacing="0" cellpadding="2" border="0" width="100%" class="dataTable"><tr><td>Unit of Measure </td> <td>Case of 5 pcs </td> </tr> </table>
<p><strong>Foxx Life Sciences, 400-0103-FLS, Teras Turbine Mixer Motor with Controller, VersaCap 120 mm </strong> </p> <p>Foxx Life Sciences' Teras Turbine mixer assembly includes a 120mm VersaCap with motor and a controller. </p> <p>Next Generation Mixing Technology from Foxx Life Sciences. The Teras Turbine™ has four mixing modes: Top Anaerobic, Top Aerobic, Full Mixing, and Bottom Mixing. Top Anaerobic is ideal for mixing of less viscous material at the top of the carboy or bottle. Top Aerobic is for adding air into the mixture within the carboy or bottle. Full Mixing is for simultaneously circulating fluid from top to center and bottom to center. Bottom Mixing is for lifting heavy or viscous materials at the bottom of the carboy or bottle. Mixing heads are available in 15mm, 25mm, 50mm, and 100mm sizes, and are made of autoclavable stainless steel. </p> <p><strong>Feature: </strong> </p> <ul><li>No external blades, which reduces the risk of injury during cleaning </li> <li>Due to the high quality finish, there is minimal surface turbulence during mixing resulting in higher energy efficiency </li> <li>The patented Teras Turbine head provides excellent vertical and horizontal mixing to produce a "full mix" </li> <li>When paired with Foxx's line of EZgrip carboys, mixing results are uniform and homogeneous with no dead spots </li> </ul>
<p><strong>FT19TMBCAP </strong> <strong>Includes Only: </strong> </p> <ul><li>Power Supply </li> <li>Cables - VGA, USB Touch, Audio Cable </li> <li>Driver DVD </li> <li>Short Installation Manual </li> <li>Standard Stand </li> </ul> <p>Capacitive Touch Monitors are designed using a modern sleek appearance with flat IP65 dust and waterproof front panels. This series comes with with capacitive 10-finger multi-touch technology, a MosH 7 glass front, and an anti-glare treated (chemical etched) glass surfaces. The projected 10-point capacitive touch panel is accurate and responsive. The touch function is quickly established when connected via USB port. </p> <p>Capacitive Touch Monitors would be a great addition to residential systems that are automated, or serving as internal/external interfaces in apartment or condominium lobbies. The faytech touch displays make for stylish directories, security system interfaces, utility controls and any other system that requires a digital interface. In an educational setting, the faytech Capacitive Touch displays would be a solid addition to classrooms for learning interactions, personnel management, scheduling systems, inventory management and digital signage to manage events. </p> <p><strong>Features with all optional accessories: </strong> </p> <ul><li>Reinforced front glass, anti-glare surface treatment </li> <li>Driver support for all the current operating systems </li> <li>10-Finger-Multi Touch Capacitive Touch Panel </li> <li>Patented IP65 front with silicon seal </li> <li>High resolution LCD Panels </li> </ul>
<p><strong>GA International also known as LabTAG, AUA-132C3-1RE, Solvent-Resistant Color Coding Labels 2" Circles, 1,000 Labels, Red </strong> </p> <p>Solvent Resistant Color Labels For Containers </p> <p>Solvent - and chemical-resistant color labels for thermal-transfer barcode printers. Ideal for color coding different containers exposed to harsh chemicals and solvents such as xylene, toluene, acetone, thinners, commercial cleaners, and window cleaners. These extra-durable labels can be printed with our XAR-class solvent-resistant ribbons to obtain a chemical resistant printout. </p> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Roll of 1000 Labels </td> </tr> </table>
<p><strong>GA International also known as LabTAG, DFP-150C3-3WH, Cryogenic Thermal Labels for 1.5ml Tube, 1.213" x 0.2724" 2 Teeth, Core 3" </strong> </p> <p>Plastic waterproof labels specifically designed to permanently adhere to vials, microcentrifuge tubes, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other specimen containers that will undergo long-term deep-freeze storage in: </p> <ul><li>Liquid phase and vapor phase liquid nitrogen </li> <li>Dry ice </li> <li>Cryogenic freezers </li> </ul> <p>Constructed from a thin thermoplastic film and an extra-strong cryogenic adhesive, they have strong affinity for glass, polypropylene, polyethylene and other plastic surfaces, and will remain adherent even through multiple freeze-thaw cycles, without cracking or peeling off. These cryo labels are compatible with most cryogenic storage systems without any hindrance or risk of being scraped off. No self-lamination is required. </p> <p>Supplied in a roll format, they can be printed with all major brands of direct thermal printers or marked on with permanent markers such as GA International cryomarkers. </p> <p><strong>Warning </strong> : Direct thermal labels will turn black and lose printed data if exposed to high temperatures or autoclaving. </p> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Roll of 3000 Labels </td> </tr> </table>
<p><strong>GA International also known as LabTAG, DFP-25C3-2WH, Cryogenic Deep-Freeze Direct Thermal Labels, 1" x 1.5", Core 3" </strong> </p> <p>These deep-freeze barcode labels come in a roll format for printing with direct thermal (barcode) printers. The plastic waterproof labels are specifically designed to permanently adhere to vials, microcentrifuge tubes, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other specimen containers that will undergo long-term deep-freeze storage. These lab labels have a strong affinity for glass, polypropylene, polyethylene and other plastic surfaces. </p> <p>These direct thermal cryogenic labels are ideal for long term storage and biopreservation in: </p> <ul><li>Liquid phase and vapor phase liquid nitrogen (-320.8°F / -196°C) </li> <li>Dry ice </li> <li>Cryogenic freezers </li> </ul> <p>Cryogenic Deep-Freeze Direct Thermal Labels are constructed from a thin thermoplastic film and an extra-strong cryogenic adhesive. The cryogenic labels will remain adhered to tubes through multiple freeze-thaw cycles without cracking or peeling off. These cryogenic labels are compatible with most cryogenic storage systems without any hindrance or risk of being scraped off. These labels do not require a self-laminate to work. </p> <p><strong>Warning: </strong> Direct thermal labels will turn black and lose printed data if exposed to high temperatures or autoclaving. </p> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Roll of 2000 Labels </td> </tr> </table>
<p><strong>GA International also known as LabTAG, DFP-4C3-5WH, Cryogenic Direct Thermal Label, 1" x 0.75" </strong> </p> <p>These cryogenic barcode labels are specially designed for printing with direct thermal printers. The thermoplastic waterproof labels are specifically designed to permanently adhere to vials, microcentrifuge tubes, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other specimen containers that will undergo long-term cryogenic and deep-freeze storage. These labels have a strong affinity for glass, polypropylene, polyethylene and other plastic surfaces. The cryogenic labels will remain adhered to tubes through multiple freeze-thaw cycles without cracking or peeling off. These direct thermal cryogenic labels are compatible with most cryogenic storage systems without any hindrance or risk of being scraped off. These labels do not require a self-laminate to work. </p> <p><strong>Features: </strong> </p> <ul><li>The labels can withstand long-term storage in liquid Nitrogen (-196°C), laboratory freezers (-80°C, -40°C, -20°C) and transportation in dry ice </li> <li>Ideal for the identification of vials, microtubes, microplates and freezer boxes </li> <li>Printable with all major direct thermal printer brands </li> <li>No need for extra lamination </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Roll of 5000 Labels </td> </tr> </table>
<p><strong>GA International also Known as LabTAG, DFPC-129C1-2YE, 4" x 1.375" Cryogenic Labels for Direct Thermal Barcode Printers </strong> </p> <p><strong>Features: </strong> </p> <ul><li>Color: Yellow </li> <li>Core: 3" </li> <li>Labels across: 1 </li> <li>Perforation: Yes </li> <li>Adhesive: Permanent </li> <li>Temperature: As low as -196°C </li> </ul> <p>These cryogenic barcode labels are specially designed for printing with direct thermal printers. The thermoplastic waterproof labels are specifically designed to permanently adhere to vials, microcentrifuge tubes, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other specimen containers that will undergo long-term cryogenic and deep-freeze storage. These labels have a strong affinity for glass, polypropylene, polyethylene and other plastic surfaces. The cryogenic labels will remain adhered to tubes through multiple freeze-thaw cycles without cracking or peeling off. These direct thermal cryogenic labels are compatible with most cryogenic storage systems without any hindrance or risk of being scraped off. These labels do not require a self-laminate to work. </p> <p><strong>Benefits: </strong> </p> <ul><li>The labels can withstand long term storage in liquid Nitrogen (-196°C), laboratory freezers (-80°C, -40°C, -20°C) and transportation in dry ice </li> <li>Ideal for the identification of vials, microtubes, microplates and freezer boxes </li> <li>Printable with all major direct thermal printer brands </li> <li>No need for extra lamination </li> </ul> <table border="0" cellpadding="2" cellspacing="1" class="dataTable" style="width:100%"><tbody><tr><td><strong>Unit of Measure </strong> </td> <td>Roll of 2000 Labels </td> </tr> </tbody> </table>
<p><strong>GA International also Known as LabTAG, FJT-154C1-1OR, 3.25" x 0.875" Permanent Deep-Freeze Labels for Thermal-Transfer Barcode Printers </strong> </p> <p><strong>Features: </strong> </p> <ul><li>Color: Orange </li> <li>Core: 1" </li> <li>Label across: 1 </li> <li>Perforation: Yes </li> <li>Adhesive: Max strength extra-permanent </li> <li>Temperature range: From -80°C to +110°C (-112°F to +230°F) </li> </ul> <p>Deep-freeze, permanent barcode labels for small diameter vials, microtubes, falcon tubes, cell culture plates, microplates as well as polypropylene and cardboard freezer boxes. The freezer-grade labels are waterproof and tearproof, can adhere to moist and wet surfaces and will permanently adhere to containers in (-20°C, -40°C, -80°C) freezers and dry ice without the need of extra lamination. They are made of a durable thermoplastic film and will resist spraying with alcohols, bleach, detergents, surface cleaning wipes and other chemicals. </p> <p><strong>Benefits: </strong> </p> <ul><li>Ideal for long-term storage in deep-freeze conditions (-80°C) </li> <li>No curing time; can be stored in freezers immediately after application </li> <li>No additional lamination necessary </li> <li>Labels and printout resist spraying with alcohols and other chemicals </li> <li>Printable with all major thermal transfer printer brands </li> <li>FDA Compliance: FDA 21 CFR 175.105 for indirect food contact </li> <li>RoHS compliant </li> </ul> <table border="0" cellpadding="2" cellspacing="1" class="dataTable" style="width:100%"><tbody><tr><td><strong>Unit of Measure </strong> </td> <td>Roll of 1000 Labels </td> </tr> </tbody> </table>
<p><strong>GA International also known as LabTAG, FJT-28C1-2WH </strong> <strong>, FreezerTAG Permanent Deep-Freeze Labels for Thermal-Transfer Printers – </strong> <strong>2" x 1" </strong> </p> <p><strong>Features: </strong> </p> <ul><li>Ideal for long-term storage in deep-freeze conditions (-80°C) </li> <li>No curing time; can be stored in freezers immediately after application </li> <li>No additional lamination necessary </li> <li>Labels and printout resist spraying with alcohols and other chemicals </li> <li>Printable with all major thermal transfer printer brands. </li> <li>FDA Compliance: FDA 21 CFR 175.105 for indirect food contact </li> <li>RoHS compliant </li> </ul> <p>Deep-freeze, permanent barcode labels for small diameter vials, microtubes, falcon tubes, cell culture plates, microplates as well as polypropylene and cardboard freezer boxes. The freezer-grade labels are waterproof and tearproof, can adhere to moist and wet surfaces and will permanently adhere to containers in (-20°C, -40°C, -80°C) freezers and dry ice without the need of extra lamination. They are made of a durable thermoplastic film and will resist spraying with alcohols, bleach, detergents, surface cleaning wipes and other chemicals. </p> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Roll of 2000 Labels </td> </tr> </table>