qtyInStock: dropship

Products with this attribute (837 total)

The KTG225S is a rock solid, bolt-down solution for graphic designers, broadcasters and other users who commonly work with multiple small flat panel TVs or monitors.This provides ergonomic adjustability for hassle-free, fingertip positioning of each monitor.

The KTP325B provides a rock solid, free-standing solution for graphic designers, broadcasters and other users who work with multiple small flat panel monitors.

The LC-35X5 from Portabrace is very popular for most small handheld cameras (fits lens shades 3 1/2"? x 5"? approx). The lens caps feature a quick-connect buckle and tether to keep them securely fastened to your camera, bag, or belt-loop. The exterior of the Lens Cap is made using waterproof Nylon Taslan material that keeps out unwanted rain, splashes, or dust and debris. The elastic opening provides a secure grip around the lens shade.There is a built-in White Balance Card that provides both structure to the Lens Cap and a convenient focal point for white-balancing. There is also a small interior pocket that can be used for carrying lens-cleaning tissue or as a convenient business card holder.

The LC-D420D by SWIT is a 4-channel simultaneous charger for Panasonic VBD/CGA series batteries with a charging current of 2A per channel. It also can be used for charging SWIT S-8D98, S-8D58, S-8D62 batteries. With the 4-level LED charging indicators for each channel, it can give user a quick reference for the real time charging capacity by percentage.

The LCD2TS allows you to stack multiple projectors: Table Stand (projector mounts not included).

The LCDA225C mount is a universal projector ceiling mount for installations requiring upright LCD/DLP projectors.Max Height: 10.8" - 16" Max Width: 8.63" - 11.5" Tray Depth: 17.75"

The LR-4GLCCB Glidecam Carrying Case from Portabrace is a rigid framed, heavy-duty case that is designed for worry-free transport of your Glidecam stabilizer system. This case has 2 heavily padded dividers as well as a BK-ZC stuff sack. The Veltex-lined interior keeps your Glidecam safe while running to shoots across town or even when you throw the case in the trunk of your car.

The LX-5112U is a Wall Mount Analog Clock with a 12" viewing diameter. The LX-5112U is designed to operate as a Time Code Reader or Stand-Alone Clock. It can read, decode and display time information from most any Master Clock or other source of time code. The clock will display time as received from a source of SMPTE/EBU, ASCII (format 0, 1, 8 or A) or ESE Time Code. After a very simple "set-up" procedure and receipt of time code, the unit automatically sets itself to the exact time and continuously slaves to the time code (If time code is lost, an error indicator is lit and the clock continues counting while referencing an internal crystal time base).In absence of external Time Code the unit may be set to real time and allowed to run based on its internal crystal oscillator. The second hand is completely silent and can be programmed for "Sweep" mode or "Step" mode. The initial set-up allows the unit to have its hours (and/or minutes) offset to that of another time zone. Also, since the clock can continuously track time code, there is no need to twice annually compensate for daylight saving time (assuming the Master Clock automatically adjusts itself accordingly).

The LX-5116U is a Wall Mount Analog Clock with a 16" viewing diameter. The LX-5116U is designed to operate as a Time Code Reader, Stand-Alone Clock or Impulse Clock. It can read, decode and display time information from most any Master Clock or other source of time code. A rear-mounted DIP switch permits the clock to display time as received from a source of SMPTE/EBU, ASCII or ESE Time Code (the Impulse Clock mode may be replaced with an IRIG-B input mode as a factory option). After a very simple "set-up" procedure and receipt of time code, the unit automatically sets itself to the exact time and continuously slaves to the time code (If time code is lost, an error indicator is lit and the clock continues counting while referencing an internal crystal time base).Other user defined modes of operation allow the LX-5116U to be synchronized to a Master Clock with a 1 PPS alternating 12 or 24 VDC "Favag" type output or to be set to real time and allowed to run based on its internal crystal oscillator. The second hand is completely silent and can be programmed for "Sweep" mode or "Step" mode. The initial set-up allows the unit to have its hours (and/or minutes) offset to that of another time zone. Also, since the clock can continuously track time code, there is no need to twice annually compensate for daylight saving time (assuming the Master Clock automatically adjusts itself accordingly).

The M-2020 20" Mirror Ball from American DJ is that one accessory you need to add to your light and dj show. Get one for your wedding reception and make it shine above you during your first dance. It is going to offer that spectacular Saturday night fever atmosphere you are looking for.With 100s of reflective mini panels and 20" size, expect a brilliant reflection to be projected onto every square inch of the dance floor. Shine different colored lights towards the M-2020 20" Mirror Ball to produce a spectacular mix of colored spots all over the room. Using the M-2020 20" Mirror Ball during your next event will surely draw people into the middle of the dance floor, instead of staying on the side lines like we are back in high school.This mirror ball is perfect for clubs, weddings, and private events due to its low cost and versatility. Use the loop on top of the M-2020 Mirror Ball to hang it anywhere you want within your venue. When you need that larger mirror ball, look no further than the M-2020 20" Mirror Ball from American DJ.

The MCMGBSCMM055 fiber media converter extends a Gigabit Ethernet (1000Mbps) network up to 550 m over multimode fiber, on 1000BASE-SX networks. The fiber media converter offers a cost-effective way to transparently convert copper to fiber, or fiber to copper, for connecting remote sub-networks to larger fiber-optic networks. Providing both SC fiber and RJ45 Ethernet ports, it integrates easily into a wide range of Gigabit Ethernet network infrastructures. The RJ45 port supports triple-speed (10/100/1000 BASE-T) auto-negotiation.Supporting a maximum multimode fiber-optic cable distance of 550 meters (0.34 miles), the media converter delivers a simple and reliable solution for connecting Gigabit Ethernet networks to remote locations over multimode fiber, while ensuring solid network performance. It provides optimum network scalability for connecting two or more Ethernet network nodes, for instance, connecting two buildings on the same campus or facility. The media converter also offers high-speed bandwidth to meet the increasing demands of large-scale workgroups that require expansion of a Gigabit Ethernet network.The MCMGBSCMM055 is backed by a StarTech's 2-year warranty and free lifetime technical support.

The MFCUS700 is a lightweight, mobile AV cart with a collapsible design that is perfect for rental and staging to corporate applications. MFCUB and MFCUS ship with a universal interface bracket MFC6000B and MFC6000S require an MSB interface to be purchased separately. Please note: shelf accessory must be ordered separately, PAC710 height-adjustable accessory shelf shown.

The MPR-210-B is a line-array desktop microphone. Revoluto technology with integrated microphone capsules provides a so-called corridor characteristic which ensures a wide range of good voice quality. Within this range the speaker can move freely, i.e. he/she can stand up or sit down, move his/her head and move towards or away from the microphone.

The MPTUB is a 9 inch medium flat panel swing arm wall mount for TVs, displays and monitors. This unit provides a very low profile in home position.

The MPTVB is a 9 inch medium flat panel swing arm wall mount for TVs, displays and monitors. This unit provides a very low profile in home position.

The MT-7602 is a 4 in 1 Fiber Optic Power Multimeter with a fiber optical power meter, visual fault locator, cable tester, and LED flashlight.The first Function is the Fiber Optical Power Meter. With a wide range of power measurement from 850nm to 1625nm, power measurements are in dBm, mW and uM. The MT-7602 Supports 2.5mm universal connectors (for ST/SC/FC).The second function of the MT-7602 is the Visual Fault locator. It makes it easy to locate the breakpoint and bad connections in fiber optic cables with both continuous and flashing modes available. It Supports 2.5mm universal connectors (for ST/SC/FC).Function number 3 is a Cable Tester with a pin to pin cable map indicator (1~8 LEDs) and tests two types of connectors, RJ-11 and RJ-45. The maximum length measurement is 600 Meters.The last function of the MT-7602 is an LED Flashlight, convenient for working in a dark environment. It features 2 modes for long illumination and SOS signals.WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The OHDLENS14 Ovation Ellipsoidal HD Lens Tubes are designed to fit all ellipsoidal fixtures as well as other standard ERS-style fixtures. Lens tubes are constructed using high-precision HD optics encased in rugged housings designed to survive the rigors of touring, broadcast and theatrical production. Each lens tube ships with a standard size gel frame.

The OHDLENS50 Ovation Ellipsoidal HD Lens Tubes are designed to fit all ellipsoidal fixtures as well as other standard ERS-style fixtures. Lens tubes are constructed using high-precision HD optics encased in rugged housings designed to survive the rigors of touring, broadcast and theatrical production. Each lens tube ships with a standard size gel frame.

The P110S Compact is a pedestal column with the DL-10RB Compact dolly that is great for studio use. The P110S Compact is equipped with the tracking locking mechanism and cable guards which come standard with the large-sized double-wheel 125mm / 4.9" casters. The tracking locking mechanism ensures straight-line movement by locking the caster direction, while the cable guards prevent the wheels from running over the cable during studio production.

The PAC526FWP4 The PAC526FWP4 simplifies flat panel installation by providing an organized, recessed space for routing excess cables. The addition of the flange adds an aesthetic trimmed appearance and drywall mounting capability. Includes a high-performance, dual gang housing, isolated ground, 4-receptacle outlet featuring the SurgeX® non-sacrificial multi-stage filtration and surge protection system. This protects equipment from disruptive high frequency noise and damage caused by power disturbances.Chief's powered solutions were co-developed with SurgeX, a brand of AMETEK® Electronic Systems Protection.Compatible with the PST, PRO, PLP, MSR, MTR, MWH, MWR, PWR, PNR, PDR, Thinstall, and FUSION wall mounts.

The PAC900 is a durable custom case for storage of the PRSU Portable Flat Panel Stand. Two wheels on each end make transportation easier. Can be stacked or stored standing on end.

The PBM-265-3G from Plura offers an elegant slim design with fast response time for smooth videostreaming in a 65" display size, native full HD resolution with high contrast ratio, wide viewing angles, accurate color reproduction and quality picture consistency that meets your HD SD Monitoring application. The PBM-3G Series features intelligent connection for Calibration Alignment and Adjustable Colormetry and Gamma Correction. Multiple monitors can be controlled by a centralized Wall control system which can be utilized to connect different size monitors in any combination. PBM-3G Series also provide many powerful display functions such as Powerful Dual 3Gb/s input display. Auto Calibration. Advanced Waveform. Vectorscope. Closed Caption (708/608) or Teletext 801 & Subtitle OP-47 for North American or Australian markets respectively. VPID. IMD. UnderScan/ZeroScan/OverScan/Zoom. 1:1 Pixel mode. PIP PAP. Various Digital Audio Metering Scales Digital Audio Decoding. Built-In Speaker. Time Code Display. Tally Lamp and Wall Control System. This is the most powerful HD Broadcast Monitor Series ever!Please Note: Item pictured may not be actual item.

The PF12000B is a solid, low-profile solution for mounting a flat panel on a floor AV stand. This unit is ideal for digital signage and corporate presentations. PF1UB and PF1US ship with a universal interface bracket. PF12000B and PF12000S require a PSB interface to be purchased separately.

The PFM2000S is a lightweight mobile cart with a collapsible design. This unit fits TVs 42-71" and Offers 3' - 4' (91-121 cm) of height adjustment. Ideal for interactive touch screens and confidence monitors.

The PHB-209RKB from Plura is a blank plate for use with the PHB-209RK fixed rackmount and is compatible with PHB-209-3G Monitors. PHB-3G Series consists of high brightness, high quality portable LCD panels, specifically designed for outdoor applications. When you need to shoot in direct sunlight, PHB-3G series is the best tool, Up to 1300 cd/m2 of brightness without using any hood or sun-visor. PHB-3G series designed for every possible broadcast mobile & outdoor environment ensuring accurate color reproduction in accordance with SMPTE, EBU, REC 709 Broadcast Standards.The standard calibration feature enables gamma, color temperature and white luminance level adjustments to meet all Broadcast standards. The PHB-3G is compatible with Plura (ICAC) calibration tool and provides 10 bit look up table (LUT) (1024 steps of grayscale).This is the blank plate only. Rackmount is not included.

The SFP-2110 is a SMPTE 2110 receiver; Multi-Mode 850 NM, LC Connectors. SFP module with software feature activation key. The optional SFP and software activation key can be purchased and installed only in the following iAM Series products: IAM-MIX8, IAM-MIX16, IAM-AUDIO-1, IAM-AUDIO-2, IAM-VIDEO-2.Note: It is recommended that setup and configuration of this option is completed using the emSET application, available via https://www.embrionix.com/product/emSET.

The ST121HDBTE HDBaseT extender kit, extends HDMI up to 230 feet (70 Meters) over a single CAT5e or CAT6 cable. The extender supports Ultra HD and Full HD resolutions (4K / 1080p) with support for 3D and the accompanying digital audio. For added versatility, both the transmitter and receiver can be powered by the same single power source using Power Over Cable (POC). The versatility of this video extender makes it an ideal solution for digital signage applications in large buildings such as commercial shopping centers, stadiums, schools, and hospitals.What is HDBaseT? HDBaseT is a standardized, zero latency, video distribution technology that?s revolutionizing HDMI distribution. HDBaseT uses an advanced method of modulation that enables you to distribute uncompressed HDMI audio and video along with additional signals such as 100BaseT Ethernet, IR, RS-232 serial and power over cable.Extend more with HDBaseT The extender offers HDBaseT technology with HDMI and Power in a single extender kit, for complete end-to-end solution. Offering greater versatility than traditional HDMI extenders or HDMI cabling alone HDBaseT is the clear choice for every integrator and system designer. The added benefit of power over cable means you?ll only need one power source at either side of your extension, great for extending video to areas where power outlets may be limited, such as industrial sites.Astonishing 4K picture quality from an impressive distance With the A/V industry quickly adopting 4K as the new high-resolution video standard, long range video distribution can be a challenge with standard HDMI cables beginning signal degradation at 30 feet. With support for 4K you?ll be amazed at how HDBaseT maintains your Ultra HD picture quality, four times the resolution of high-definition 1080p, even at 130 feet away from your video source. Plus, because the extender supports High-Definition 1080p and lower resolutions at 230 feet away, you can comfortably use this extender to make any video source look great.Simplify your setup This extender has been specially crafted for a smooth, tidy installation. HDBaseT technology allows for single cable installation, for seamless integration using existing CAT5e or CAT6 infrastructure, avoiding the hassle of running multiple Ethernet cables while, reducing potential failure points. Plus, the added benefit of power over cable means you?ll only need one power source to power both your extender and receiver, great for extending to areas where power outlets may be limited. Mounting hardware is also included for both the extender and receiver for discrete, professional mounting.The StarTech.com Advantage Requires only a single power adapter for both the Transmitter and Receiver Cost-effective HDMI extension through non-proprietary network cabling Optional mounting hardware included for a tidy, professional installationThe ST121HDBTE is backed by a 2-year StarTech.com warranty and free lifetime technical support.Note: If you want to add more displays, you can daisy chain this product with the HDBaseT repeater ST121HDBTRP.

The Swit S-4610 is a mini SDI audio Embedder, supports up to 3Gb/s SDI, and can be widely used in broadcast field production and professional audio/video conversion and transmission. S-4610 can embeded 2-ch AES /EBU or anolog audios to any 2 audio channels of SDI signal. User can select the channel number to be embedded by the 6 switchers on the front panel of the product. S-4610 also has two SDI with embedded audio outputs. S-4610 built with 3 LED indictors which is convenience for user checking the status of power connections, SDI input recognization and output status of the new embedded SDI signal delivery. S-4610 offers: 1x 3G/HD/SD-SDI input 1x AES/EBU digital audio input (2-ch) 2x 6.35mm 1/4" analog audio input (balanced) 2x New Embedded 3G/HD/SD-SDI outputs (If both AES/EBU audio and analog audio is connected, only AES/EBU audio embeded)

The TSE-SET-2 is a touch screen extender pair (TSE-1-Eu Transmitter & TSE-1-Ru Receiver). supports resolution up to <a href="/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="61535155591950545257215751291b4f241915040f0512">[email protected]</a> VGA with USB control over a single CATx cable with a maximum VGA resolution of 2048 x 1536 up to 330 meters (1000 feet). The TSE-SET-2 features Plug and play - no software required, and remote/local monitoring and control along with the ability to Work with most major touch screen brands. The following Touch Screen have been tested: Abon Touch, AIM Touch, ELO 15"-22" interface, HP Compaq L2105tm, One Touch, WACOM Clintiq 17SX PL700, Planar 15"-19" & ADESSO Cyber Tablet Z12 Touch Pad.

The A-CP(A) is a versatile aluminum cheese plate that is designed to attach to IDX V-Mount P-V2 series plates. An industry standard 15mm rod clamp is included, which is mountable on various positions of the cheese plate for fully customizable configurations. Multiple 1/4? and 3/8? screw holes are available for accessory or camera mounting. The A-CP(A) with IDX?s ET-PV2BM (Black Magic Camera power adaptor) or A-E2EOSC (Canon C300/C500 power adaptor) together offer a sleek power source on a camera rod system. The P-V257, P-V284, and P-V212 are also compatible with the A-CP(A) for powering various Sony, Panasonic, Canon, and JVC cameras on a rod system.

The Adder CCS-XB illumination module is an accessory which connects to the CCS-PRO4 (sold separately) to communicate via CCS-LED Indicator Lamp cables (4 included). It gives the users the option to have a CCS-LED LED indicator lamp positioned on each screen to identify which screen you are currently controlling. The color and intensity can be adjusted for each screen. A maximum of 10 CCS-LED illumination indicators can be supported.

The ADDER CATx CATX-USBA-DA is a Dual Computer Access Module or CAM with Audio Support, a highly compact device that allow you to share a single computer between two sets of peripheral devices. In simple terms the CAM can be viewed as a combined video splitter and peripheral hub. This is useful for mixing local and remote stations or mixing KVM with extension or signage systems.The module connects to the video, USB and RS232 ports of your computer and then connects via CAT 5, 5e or 6 cabling to the ADDER View CATx KVM switches and/or ADDER extender receivers like the ADDERLink X100 or X200 (sold separately), each of which can be located up to 984 feet/300 meters from the module. Your video display, keyboard and mice are linked to the remote devices.

The ADDERLink X200AS-USB/P-US is a USB KVM and Audio Remote User Station with Skew an IEC PSU and a CATX-USBA Computer Access Module included. The X200 have been designed for use in applications where up to two computer systems can have their keyboard, video, audio and mouse control extended up to 200m (650 ft.) over CAT5 or higher UTP cable. The ADDERLink X200 provides absolute real time keyboard and mouse performance along with hi-definition, hi-resolution video over a VGA interface. The ADDERLink X200 receiver can be connected to the ADDERView CATx range of KVM switches as well as to individual computers using ADDER's range of computer access modules.ADDER CATx KVM Switches and Extender products like the X100AR-US or X200AR-US are used in conjunction with ADDER CAMs or Computer Access Modules (additional CAMS sold separately) to connect to a range of machine types.

The ADDERLink X200ASR-US is a USB KVM and Audio Remote User Station with SKEW Compensation. The X200 have been designed for use in applications where up to two computer systems can have their keyboard, video, audio and mouse control extended up to 200m (650 ft.) over CAT5 or higher UTP cable. The ADDERLink X200 provides absolute real time keyboard and mouse performance along with hi-definition, hi-resolution video over a VGA interface. The ADDERLink X200 receiver can be connected to the ADDERView CATx range of KVM switches as well as to individual computers using Adder's range of computer access modules.ADDER CATx KVM Switches and Extender products like the X100AR-US or X200AR-US series are used in conjunction with ADDER CAMs or Computer Access Modules (sold separately) to connect to a range of machine types.

The ADDERLink X100A/R-US is a short haul, fully featured, keyboard, video, mouse and optional audio extender for PS/2 and USB computers. ADDERLink X100s have been designed for use in applications where keyboard, mouse, high quality video and audio needs to be extended no more than 100m (330ft) over category 5 or higher UTP cable.The ADDERLink X100s provide industry-leading video clarity, audio quality and compatibility.ADDER CATx KVM Switches and Extender products like the X100AR-US or X200AR-US are used in conjunction with ADDER CAMs or Computer Access Modules (sold separately) to connect to a range of machine types.

The ADDERLink Infinity ALIF101T-HDMI is a Zero-U, high performance single-link DisplayPort KVM Transmitter with USB and Audio. Part of the ADDERLink INFINITY series, ADDERLink Infinity 100 is the world's smallest high performance KVM extender transmitter that enables you to locate your critical computing hardware in a secure and temperature controlled environment, isolated from the user work station. This KVM extender can be used as a point-to-point extender, or integrated into a wider matrix system when combined with the ADDERLink INFINITY Manager (A.I.M.).Please Note: The ALIF101T-HDMI transmitter requires at least one ALIF1002R receiver to operate.

The AdderLink™ AL-IPEPS enables you to remotely access and control your critical computing hardware using your standard IP network. KVM connections are VGA and PS/2. Using RealVNC client software, computers outside the network can be remotely and securely accessed.RealVNC server with RFB 3.3 support: up to four users can remotely and securely access computers outside your network, with the possibility of creating sixteen user profiles with defined access rightsHigh performance video over VNC: RealVNC enables video resolutions of up to 1600x1200, as it is free of the limitations of HTTPSUSB and Virtual media support: engineered to act as a conduit through which data can be passed so that files can be transferred via IP onto the ipeps and onto the target computer by means of a USB virtual media portChoice of power source: can be powered from two USB cables or independently from an external 5V power sourceIndependent operation: maintain full control even during boot up, BIOS level or computer crash states, it will even work even if the controlled devices are not operationalADDER.NET Enterprise Management Software: provides a centralised, secure and intuitive user access management interface, where up to sixteen user profiles with defined access rights can be created

The ADDERView AVX1016-US is a CATx 1000 KVM Switch for 1 local user to 16 computers. The CATx 1000 series are high density, small form factor KVM switches that provide local and remote access for a user that wishes to control up to 16 multi-platform servers using neat and convenient CATx cables.The CATx 1000 combines USB console support with a full KVM feature set to create a truly modern KVM switching solution that provides high quality video and CD quality audio. Highly flexible connectivity options make the ADDERView CATx 1000 the ideal solution for a wide range of server room, desktop and other demanding applications.The ADDERView CATx 1000 can be controlled by a user from up to 984 feet/300m away over CATx cable using the ADDERLink X200 or X100 receiver and the integrated CATx extender. Flash upgradeable CAMs (Computer Access Modules) available for PS/2, USB and Sun keyboard and mouse support with optional audio (all sold separately).

The ADJ COB Cannon Wash Pearl uses advanced RGBA COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGBA shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the COB Cannon Wash Pearl is a QUAD RGBA 4-In-1). It also doubles as an uplight with its dual yoke that act as legs to set the fixture upright to wash walls and ceilings.The COB Cannon Wash Pearl comes in an off-white casing and has massive 80-degree beam angle. Easily replaceable 40-degree and 50-degree lens are included so that the beam angle may be changed.It has 7 DMX Channel modes for programming flexibility, built-in color macros and 5 selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, DMX and PowerCon power daisy-chaining, and a 4-button DMX display. COB Cannon Wash Pearl may run in its stand-alone mode from built-in programs, sound actively or from a DMX controller.

The ADJ Dotz Par uses advanced COB (Chip On Board) technology allowing for a powerful LED engine to be placed in a small amount of space. The result is a high output, smooth color mixing LED Par with no RGB shadows. Designed for mobile or permanent wash lighting of stages, clubs, dance floors and churches. The COB LED engine on the Dotz Par is a TRI 36W (3-In-1). The Dotz Par produces wash of 60-degrees (25-degrees if you put on the supplied lens kit). It has 4 DMX Channel modes for programming flexibility, 32 built-in color macros and 5 selectable Dim Curves. The fixture has many pro features such as: 0-100% electronic dimming, strobe/pulse effect, Flicker Free operation, DMX and power power daisy-chaining , and a 4-button LCD DMX display. Dotz Par may run in its stand-alone mode from built-in programs, sound actively, from a DMX controller , or from the ADJ Par RF wireless remote control.

The ADJ POC723 Pocket Pro is a mini Moving Head with a 25-Watt LED source, replaceable GOBOs and powerCON power input. On the top of the head is a manual focusing wheel that allows users easy and precise focusing of the GOBOs so they look crisp in a variety of applications. The Pocket Pro is powered with a 25W LED engine with crisp optics. Like the Focus Spot Series, the Pocket Pro is designed with the EZ OPEN cover giving full access to the GOBO Wheel. Its compact size and light weight make it ideal for mobile entertainers, small club, and bars, roller rinks, bowling centers or perfect for events and custom GOBO projection in a lounge or retail environment. This unit includes a locking powerCon for power, so you never need to worry about vibration or not having a secure AC connection. This fixture features seven colors plus white and 7 replaceable GOBOs (plus 4 additional GOBOs included in the box). The GOBOs and colors are on separate wheels. These features are not found in moving heads of this class. Its compact size and lightweight makes it ideal for mobile entertainers, small club and bars, venues with low ceilings, roller rinks, bowling centers or any mobile production. Control methods include: Sound active with 4 built-in shows, a DMX controller to create your own light shows, Airstream DMX Bridge, or myDMX control software.

The ADJ POCKET PRO PEARL PAK system includes 2 ADJ Pocket Pro moving heads and 1 F4 Par Bag. On the top of the head is a manual focusing wheel that allows users easy and precise focusing of the GOBOs so they look crisp in a variety of applications. We set out to find the perfect solution to make the Pocket Pro pearl brighter than its predecessor. The Pocket Pro Pearl is powered with a 25W LED engine with crisp optics. Like the Focus Spot Series, the Pocket Pro Pearl is designed with the EZ OPEN cover giving full access to the GOBO Wheel. Its compact size and light weight make it ideal for mobile entertainers, small club, and bars, roller rinks, bowling centers or perfect for events and custom GOBO projection in a lounge or retail environment. This unit includes a locking powerCon for power, so you never need to worry about vibration or not having a secure AC connection. This fixture features seven colors plus white and 7 replaceable GOBOs (plus 4 additional GOBOs included in the box). The GOBOs and colors are on separate wheels. These features are not found in moving heads of this class. Its compact size and lightweight makes it ideal for mobile entertainers, small club and bars, venues with low ceilings, roller rinks, bowling centers or any mobile production. Control methods include: Sound active with 4 built-in shows, a DMX controller to create your own light shows, Airstream DMX Bridge, or myDMX control software.

The ADJ UB 9H is a 41.75-inch (1-meter) professional grade indoor linear fixture powered by nine 6-Watt HEX LEDs. Its bright chromatic 40-degree beam angle provides vibrant TRI color mixing designed for washing stages, walls and dance floors. Its rugged casing with patent pending Quick Align end locking allows for a seamless output of light with no breaks of color. The UB 9H features built-in Color Macros (built-in colors), 6 DMX Channel Modes, 0-100% dimming and variable speed strobe. Plus, it offers flexible programming from its on-board 4-Button LED DMX-512 menu, or from the ADJ UC IR wireless remote that is included inside the box.

The ADJ WiFLY QA5 IP is an IP65 outdoor rated compact Wash Fixture with ADJ's WiFLY wireless DMX built-in. It offers the power of 5x 5-Watt RGBA Quad LEDs (Red, Green, Blue & Amber) to create rich hues and smooth color mixing for stage or wall washing. ADJ's WiFLY Transceiver will communicate up to 500 feet (open line of sight) with the WiFLY QA5 IP. This fixture uses LEDs rated at 50,000 hours with a maximum power draw of 35W. DMX addressing may also be changed by the unit's 4-button LED display, or controlled by a DMX Controller by DMX cabling or via ADJ's stand alone WiFLY Transceiver.

The advanced, simultaneous LP Performance Charger Series features an efficient multi-chemistry algorithm in a compact form factor. This design makes it ideally suited to fit on shelves, table tops or other tight spaces.The LP Performance Charger automatically detects which battery has the strongest charge and prioritizes it, ensuring that a fully charged battery is always available in the shortest amount of time possible. Software constantly monitors the charging process and discharge curves to ensure that each battery is charged to its peak performance. Wi-Fi ready for ease of fleet management providing an ideal solution for rental facilities, ENG/EFP/OB vehicles and broadcast equipment depots.The LP Performance Series is available in both Gold Mount and V-Mount connectors and is the perfect complement to the Digital or Logic Series batteries.The LP2 Dual V-Mount Battery Chargers allow for ease of travel or fitting in small spaces.

The Aladdin AMS-FL50BI DIM Dimmer Unit is for use with the BI-FLEX1 LED Panel. Featuring an LED Display for color temperature readout and light intensity, the dimmer unit provides smooth dimming from 100 - 5%. The Aladdin BI-FLEX1 is the first flexible Bi-Color LED panel for professional use in television, movie and photographic production with an outstanding light quality and a CRI and TLCI over 97. The BI-FLEX1 is the cinematographer?s choice for a small, lightweight and powerful lighting tool for many applications like: portable interview light or to hide in narrow spaces like elevators, cars or even inside objects for product photography.The BI-FLEX1 runs from main power supply or battery. The BI-FLEX1 comes with a dimmer and a mount for 16mm studs, to mount it onto your stands or clamps and it has on each corner a velcro enabling you to put it wherever you like, for instance to upgrade your old halogen softbox to LED. The DIY rigging options are virtually endless! The BI-FLEX1 is a flexible panel light 30x30cm and less than 5mm thick. The BI-FLEX1 is designed to be used by anyone, anywhere!

The all-new Cobalt 9910DA-4Q-3G-RCK 3G/HD/SD Quad-Channel Multi-Rate Reclocking DA with x4 Output Crosspoint supports four input channels which can be crosspoint-routed to any of 16 DA outputs. The 9910DA-4Q-3G-RCK is multi-rate with user enable/disable reclocking, and supports SDI and ASI/DVB on all inputs and outputs with non-inverting outputs. The quad-input capacity provides a one-card solution for distribution of 4K quadrant-division content over 3G/HD/SD-SDI interfaces.The extremely flexible crosspoint (which is user-configurable via DashBoard GUI remote control) allows quad 1x4, dual 1x8, single 1x16 and other routing possibilities. Any of the four input channels can be distributed or duplicated across four groups of 1x4 DAs, and any of the four inputs can be set to use an alternate failover input upon loss of signal.Excellent receive performance allows receive EQ for up to 120m 3G and 160m HD cable length (1694A). Card edge and DashBoard remote status monitoring indicates input lock for each input channel. Up to 10 of the 9910DA-4Q-3G-RCK cards can be installed in a frame to provide 40 channels of input, with distribution to up to 160 outputs.Full user DashBoard or Remote Control Panel remote control allows full status and control access locally or across a standard Ethernet network. NOTE: Rear output module required.

The all-new Cobalt BBG-1070-QS 3G/HD/SD-SDI/CVBS Standalone Expandable Multiviewer with Advanced On-Screen Graphics integrates five discrete 3G/HD/SD-SDI or CVBS inputs onto a single 3G/HD/SD-SDI quint-split output, with each input image being flexibly inserted into the output image area.Any template layout or custom layout changes can be done "on-the-fly" in real time, without tedious setup compiler or layout programs like many other split/multiviewer products. While the BBG-1070-QS offers unprecedented flexibility, it also offers an unprecedented ease of use. Fully-flexible layouts using any of several one-button template presets or fully customizable layouts using easy to use sizing/positioning custom controls. Custom layouts can be saved to user presets. Multiple BBG-1070-QS units can be cascaded to provide splits greater than the base quint-split. The PIP5 input can be used in a cascaded chain of BBG-1070-QS units that provides multiviewer layouts of up to 8x8 (64:1). The QuickSet grid definer precisely and easily sets up a multiviewer grid where columns and rows of each of the cards PIPs are arranged to work together in a cascaded aggregate arrangement. Low-latency processing allows multiple BBG-1070-QS units to be cascaded without significant accumulated delays within the chain. Advanced graphics such as user identify text, PiP input video format, audio meter bars, tally/UMD, reticules, and timecode can be burned into any PiP with full user attributes control. CEA 608 Ch1 text strings can serve as user text overlays, allowing direct closed captioning presence/quality compliance checks for up to 5 simultaneous video streams per unit. User-configurable Quality Check allows subjective criteria such as black/frozen frame or audio silence events to propagate an on-screen alarm/alert to the output image (such as alert text burn-in or border alert highlighting). Asynchronous inputs can be directly accommodated ? each PiP input is provided its own independent timing alignment controls with lock to reference. An HDMI output (with audio embedding) allows direct feed to a wall monitor. GPIO allows direct input routing control and status monitoring. DashBoard remote control allows easy centralized control and monitoring access.The compact standalone form factor allows desktop usage, as well as the 1/3-rack size of the BBG-1070-QS allowing 3 units to be installed in a 1RU space (an optional mounting tray is available that provides secure mounting of the units to a standard 19? frame).

The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability.

The AmpliVox SW925-96OE Digital Audio Travel Partner Plus is their most complete, all-in-one PA system. The 250 watt portable address system will clearly and powerfully project your voice or music over an audience of up to 5000 people in a room size of up to 25,000 square feet.You're in control with built-in Media Player allowing you to play your own recorded music using your SD card or Thumb Drive. Also, stream audio wirelessly from your smart phone, tablet or any other Bluetooth® enabled device. The new system can reach up to 10,000 people, indoors or out, and even larger audiences with one or more companion satellite speakers. It can also accommodate up to four wireless receivers and microphones, and, it includes accessories that are TAA compliant, for GSA-related business.

The analog input card provides 2 analog inputs. These can be set up as composite, component or one of each.

The Anchor MEGA-DP1-AIR-H MegaVox has the speech projection to reach a crowd of about 3000 people when used with the optional unpowered companion speaker. This sound system is very light, weighing 15 lbs. The MegaVox is used by firemen, policemen, coaches, FBI agents, Marine drill sergeants, and auctioneers. There are many options to choose from, just take your pick.

The Anchor MEGA-DP2-HH MegaVox has the speech projection to reach a crowd of about 3000 people when used with the optional unpowered companion speaker. This sound system is very light, weighing 15 lbs. The MegaVox is used by firemen, policemen, coaches, FBI agents, Marine drill sergeants, and auctioneers. There are many options to choose from, just take your pick.

The Anchor Audio AN-MINIDP-H is a powerful personal portable PA system. It is compact and lightweight, so you can take it anywhere - perfect for on the go! Designed for both voice amplification and music, this public address system is completely versatile. The AN-MINIDP-H is stand mountable; however, it can easily be carried in a soft case with a shoulder strap and mic holster becoming the AN-MINI. Use the MiniVox Lite indoors and outdoors for classrooms, emergency preparedness, cheer and dance practice, tours, group settings, auctioneers and more.

The Anchor Audio BEA2-X is a Beacon portable sound system with built-in Bluetooth & AIR wireless transmitter. The Speaker Reaches crowds of 2,500+ with its 120 dB of clear sound and powerful 150W AC and 125W DC modes. The built-in rechargeable batteries operate 6 - 8 hours on a single charge. The lightweight array tower has eight 4" neodymium speakers and the base has three 8" neodymium subwoofers. This unit comes with one built-in transmitter that wirelessly connects to one or more Beacon AIR receiver speakers and one built-in receiver that wirelessly connects to the Beacon AIR transmitting speaker.

The Anchor Audio LIB2-AC is a Liberty Platinum with built-in Bluetooth. This is the AC powered version. The LIB2-AC is the most popular Anchor Audio portable sound system, and the product to define the industry. Use the Liberty indoors and outdoors for school functions, corporate events, political rallies, military ceremonies, indoor and outdoor auditoriums, houses of worship, and more.The Liberty is a stand mountable portable sound system that offers up to two built-in wireless receivers. Standard built-in Bluetooth is also included in every unit with an optional built-in CD/MP3 combo player. The Liberty also has an optional built-in transmitter that wirelessly connects to one or more Liberty AIR battery powered companion speakers.

The Antari S-500XL™ is an enhanced version of the S-500 large capacity ?Silent? operation DMX controllable snow machine packaged with the following included accessories: 65.6 ft (20m) Air Hose and Nozzle Wireless DMX Control S-3 Wired Remote Control PM-1 Pan MotorThe Antari S-500XL™, is housed in a durable road case with wheels and features a 5.2 gallon (20 Liter) capacity fluid tank, a 65.6 foot (20 meter) long air hose for easy rigging on a stand or truss, and adjustable wind volume and flow rates. The road case features a small access door for the air hose so can the case can closed when in use for ""Silent"" operation.

The Anton Bauer 8075-0259 is a V-Mount Battery Bracket for the (Alexa Mini/Mini LF) Cameras

The Anton Bauer 8075-0274 Pro V-Mount (Canon C200, C200B, C300mkII) with a rugged aluminum body for durability and secure battery mounting and a Canon C300mkII, C200, C200B LEMO compatible connector. Features 3x P-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. 12" cable exits the right side of the plate allowing easy insertion into the camera.

The Anton Bauer 8075-0281 V-Mount battery plate with a DC connector compatible with Sony PXW-FS7, FS7mkII, FS5, and Panasonic EVA1 and 2x P-Tap ports to power camera accessories. This model also works with Sony EX3 cameras. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Voltage regulator integrated in the plate provides constant 12V to camera. The 16" length minimizes cable excess while still being able to reach positions further away from the camera as necessary.

The Anton Bauer 8375-0235 is a Micro V-Mount bracket with flying leads to mount to camera that Accepts full size and Micro V-Mount batteries with a Single P-Tap output and Single 5V high speed USB port

The APC Smart-UPS SRT 5000VA 230V is a High density, double-conversion on-line power protection with scalable runtime.

The AR-DR44WL is a custom-fit protective carrying case for the Tascam DR44WL audio recorder. The case provides both protection for the recorder as well as an improved field-recording experience by allowing the recorder to securely hang from a shoulder strap or clip to your belt for quick-access. Easy access to the mic, controls, and cable input/outputs are provided by the case's custom-fit design.The case's outer layer is constructed of durable, 1000-denier Cordura Nylon material, which provides reliable protection against bumps and scratches. The interior of the case is lined with soft mesh fabric to prevent scratching on the recorder's surface and also to improve air-flow around the equipment during use.There's a belt-loop for securely attaching the recorder to your belt. We recommend combining the AR-DR44WL with the Portabrace HB-15 Shoulder Strap (sold separately) for additional comfort and accessability.

The AR-DR701D Recorder Case is designed to custom fit the Tascam DR701D or the Tascam DR70D recorder for use with wireless mics. Featuring flaps, clear vinyl windows, and protective coverings, this mixer case provides access to cable openings, batteries, dials, and switches. The mixer case is also padded to protect your mixer and accessories. The AR-DR701D includes the main mixer compartment and a comfortable shoulder strap.Equipment Covered: Tascam DR-70D, Tascam DR-701D

The ART500 is a touch panel DMX Controller with 1,024 DMX channels and 500 preset scenes, designed to be the most effective control solution for architectural control. Included is the ART500 software package, which offers an easy to navigate interface, combined with powerful control features.This feature rich lighting controller has been designed to provide a control solution for the most demanding of projects, whilst maintaining an easy to use panel of touch sensitive buttons. The controller integrates a graphical color screen allowing scene photos to be displayed. Easily view the selected zone, scene name and design without the need to navigate through complex menus. Change the speed, color and dimmer using the circular palette. The lighting levels, color and effects can be programmed from a PC, Mac, Android, iPad or iPhone using the included software.Founded in Los Angeles by veterans of the lighting industry, Elation entered the professional lighting market in 2002. In the ensuing years, the company has been in the forefront of developing innovations that have set new standards for Network TV News sets, Motion Pictures, Live Theater, Concerts, Award Shows and so much more. One of their many accomplishments is the development of TriColor LED technology, which creates superior colors with no color shadows, the new Platinum Automated lighting fixture series that introduces a new level of compact power and speed to moving head fixtures and the EPV Series LED video panels, which mark a milestone in the convergence of video and lighting technologies.

The ASB7128 is a high power, lightweight front-loaded vented subwoofer enclosure housing two of JBL's exclusive 2269H Ultra Long Excursion 18" Differential Drive woofers. This woofer features neodymium magnet, dual voice coils and dual gaps, JBL?s exclusive Vented Gap Cooling and ultra robust composite cone for high excursion and extra long life. Woofer is capable of a peak-to-peak maximum excursion of 3.5".

The Atom RAID SSD is Glyph's fastest Solid State Drive ever. Combining capacities up to 4TB with speeds of up to 770MB/s, wrapped in a rugged, bus-powered aluminum enclosure that fits in your pocket. Compatible with Thunderbolt 3 and USB 3.0, it's our fastest and most versatile drive yet.

The ATSC-SDI 4 is the first HDTV Tuner that features a native HD-SDI port, as well as MPEG2 and MPEG4 decoding. It is controllable via RS-232, IP, and IR commands. An onboard Web page enables remote Web control. A new menu-driven display simplifies setup, and a front-panel USB port makes firmware updates a snap. The new compact enclosure allows mounting of two tuners in a single rack space.The integral HD-SDI output allows inclusion of 708/608 captioning, choice of AES stereo or AC-3 audio, and scaled output set to a constant 1080p, 1080i, 720p, or 480i resolution.A universal TV tuner, the ATSC-SDI 4 can receive both analog and digital channels, in ATSC, NTSC, and clear QAM formats. Using an optional RF switcher, the tuner can switch between Antenna and Cable feeds.This unit includes a universal rack mount kit, which is a combination of the RK1 & RK2EZ that will allow you to mount the unit into a 1RU or 2RU slot in your Rack right out of the box.

The ATV-BAT is a battery pouch that easily attaches and detaches to the Portabrace ATV-Z8 Audio Tactical Vest and AR-Z8 Recorder Case. You can quickly add this to your case or quickly remove it if you don't need it. This case is made using padded 1000- denier Cordura nylon.

The Audio Organizer (AO) is a 1000-denier Cordura nylon case with a rigid plastic frame and interior padding in the main section and pocket. It is designed to carry a mixer, wireless microphones, transmitters, batteries, cables, connectors, and other equipment. The AO-688H comes with a durable audio harness.Zip-off side panels provide access for cables. The case is completely reversible so the mixer can be positioned anywhere and the hinged top can be removed and positioned front to back. it moves the entry either closer or further away. The case has cable ports on each side so cables can be routed into all exterior pockets for snag free wiring versatility.The Audio Organizer has a receiver/transmitter pocket on each side of the case, a microphone power supply pocket, and a padded main outside pocket, which is sewn in to prevent sagging. There is a layer of anti-skid, waterproof Slip-Not material on the bottom of the case. An audio harness is included in this case to help distribute the weight in a comfortable way.The AO-688H is designed specifically to fit the Sound Devices 688 with or without the CL6.Equipment Covered:Sound Devices 688, Sound Devices 688/CL6.

The Audio Organizer (AO) is a 1000-denier Cordura nylon case with a rigid plastic frame and interior padding in the main section and pocket. It is designed to carry a mixer, wireless microphones, transmitters, batteries, cables, connectors, and other equipment. Zip-off side panels provide access for cables. The case is completely reversible so the mixer can be positioned anywhere and the hinged top can be removed and positioned front to back. it moves the entry either closer or further away. The case has cable ports on each side so cables can be routed into all exterior pockets for snag free wiring versatility.The Audio Organizer has a receiver/transmitter pocket on each side of the case, a microphone power supply pocket, and a padded main outside pocket, which is sewn in to prevent sagging. There is a layer of anti-skid, waterproof Slip-Not material on the bottom of the case. A comfortable suede leather shoulder strap is included for carryng the case over the shoulder or around the neck. The case can also be used with an optional Portabrace Audio Harness. The AO-4WT/664 is wider and taller than the standard AO-4, designed specifically to fit the Sound Devices 664 with or without the CL6.

The Audio-Technica ATCS-C60MAG-REG conference manager software offers total control over the conference system including integration with video systems, speaker order,speech mode (FIFO and LIFO), number of speakers, holding time, individual volume, thresholds and a great deal more. This extended version also features.... Video follows audio control (external camera required) Video recording Audio recording Minute taking Conference record

The Audio-Technica ATH-E50 features specially designed housings that provide excellent isolation, ensuring confident, comfortable stage performance. To address the evolution of modern music production, this model also excels at providing a consistent reference in every sonic environment, making it the ideal choice for the producer on the road. The sound isolation and comfort offered by the ATH-E50 are enhanced by the four sizes of included silicone eartips (XS/S/M/L), which allow you to create a custom fit. The ATH-E50 also comes with a detachable 5.2ft cable, with newly developed A2DC (Audio Designed Detachable Coaxial) connectors at the headphones and a 3.5mm stereo mini-plug output, and a carrying case.

The Audio-Technica ATW-3211/893EE1 wireless microphone system with BP893cH headworn mic in black is part of the fourth-generation 3000 Series wireless systems that give you the power and flexibility to operate within the congested UHF spectrum. 3000 Series systems have an operating range of 300ft and are available in two frequency bands - DE2 (470-530MHz) and EE1 (530-590MHz) - that provide a class-leading 60MHz tuning range, which is more than twice that offered by the previous 3000 Series models. Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets you set a backup frequency that can be quickly swapped by pressing the transmitter's multifunction button in the event of unexpected interference. Available system configurations feature an ATW-R3210 receiver along with an ATW-T3201 body-pack or ATW-T3202 handheld transmitter. The ATW-T3201 is equipped with Audio-Technica's new rugged cH-style screw-down 4-pin connector for secure connection to A-T's cH-style lavalier and headworn microphones, or cables. The ATW-T3202 comes with either an ATW-C510 dynamic or ATW-C710 condenser interchangeable cardioid capsule, and its industry-standard thread allows for the use of four additional A-T capsules, plus other compatible capsules. Both transmitters feature rugged, metal housings and are powered by two AA batteries. Charging terminals on each transmitter work with the ATW-CHG3 and ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries.

The Audio-Technica ATW-B80C is an in-line RF booster. UHF (540-565 MHz) in-line antenna boosters (pair) increase RF signal strength (10dB/3dB gain switch) to compensate for antenna cable loss. For use with Audio-Technica UHF receiver models AEW-R5200, AEW-R4100 and with the ATW-DA49 and AEW-DA series antenna distribution systems and other devices providing 12V DC antenna power.

The Audio-Technica BP893xcT4 Omnidirectional Condenser Headworn Wireless Microphone features an unobtrusive 0.2" boom that extends just beyond the bottom of your year and is designed to provide extremely intelligible, vocal reproduction for stage and television talent, lecturers, and worship leaders. The microphone includes the BPCB-cT4 detachable, field-replaceable 1.4 m (55") cable terminated for Shurer wireless systems using TA4F-type connector. Other detachable cables with a variety of output terminations are available separately. The BP893xcT4 includes AT8440 cable clip, AT8464x dual-ear adapter kit, AT8157 windscreen, AT8171 windscreen, two AT8156 element covers, a moisture guard, and a carrying case.

The Audio-Technica ATIR-T85 is a infrared lavalier microphone for the ATCS-60 conference system. It's lightweight, compact and the tie clip allows easy attachment and direction-angle adjustment. The transmitter clips to your belt and the microphone is a high-quality condenser element. It operates using 2 AA alkaline batteries. It has three output settings (ECO, LO, and HI). Continuous operation in ECO mode is approximately 10 hours.

The AudioPressBox APB-112 SB-D is a portable, professional, active Audio Press Box with a one channel RJ45 DANTE input and 12 Line/Mic outputs. Powered by POE (Power Over Ethernet) you only need ONE cable for both signal and power. The AudioPressBox APB-112 SB-D features high quality individually balanced and isolated transformer outlets and each output is switchable between Mic or Line Levels. Plug and Play means super quick set-up anywhere abd thanks to DANTE patching you can easily expand channels and outputs by adding another AudioPressBox APB-112 SB-D.

The AUDIX TM1 Plus Makes a Measurable Difference Audix is proud to announce the introduction of the TM1 Plus, a combination kit which includes the TM1 measurement microphone, threaded acoustic windscreen, shock mount clip, ½ inch calibrator adaptor and microphone calibration data on CD. The data files are a numeric representation of the TM1 frequency response. These, together with the provided sensitivity of the microphone, can be used with a variety of popular software measurement systems to correct the response curve of the microphone. VP of Sales Cliff Castle states, "The TM1 has earned very high acceptance amongst sound engineers and sound designers who rely on measurement systems to properly tune a PA system for live sound venues, theatres, houses of worship, and a wide variety of installations. Measurement software packages have become very robust and are now able to take simultaneous measurements with multiple microphones, allowing sound designers a very accurate picture of how the PA system is reacting throughout a room in real time. With the TM1 Plus, customers are able to accumulate multiple microphones, essentially creating matched sets once the data files are input into the software measurement programs." The TM1 is a 6mm pre-polarized condenser microphone that is designed, assembled and tested by Audix in Wilsonville, Oregon. The microphone features a precision machined four stage brass body and capsule housing, low noise SMT circuit, nickel plate finish, field replaceable parts, Switchraft r XLR and shock absorbent O-rings. All accessory items for the TM1 are included in the TM1 Plus to make this kit an exceptional value.

The Auralex® ProKit-2™ acoustical treatment package is a cost-effective solution engineered to control excess mid- and high-frequency reflections in your room. Based on the Auralex® Class A fire-rated, fabric wrapped fiberglass ProPanels, this kit provides state of the art absorption performance with high build quality, great aesthetics and low odor. The included panels cover more surface area than competing offerings, a more effective resolution to your room?s acoustical problems. The kits include 2"x2?x4? beveled wall panels and reverse mitered corner bass trap panels to provide low-frequency absorption, critical in small to medium-sized rooms. The ProKit-2 room treatment system is available in two standard fabric choices, Sandstone or Obsidian, and include all mounting hardware. Additional ProPanel Cloud and monitor isolation solutions are also available.

The Avenview FO-DVI-1080LC-SET, DVI Extender over Fiber Optic DVI extension system is designed to let digital flat panel display extend over 500m (1650 feet) away from host based on DVI standard by optical transmission technology. Its small package and pseudo DDC detect function and Self-EDID detect function to use standard LC fiber connector allow users to install and utilize the device conveniently.

The Avenview HBT-C6POE-R HDBaseT Receiver CAT5/6/7 with POE, Bi-Directional IR and Ethernet has been designed to extend High Definition video and multi-channel digital audio formats to any HD Monitor. Video Signals: 4K2K@30 (Ultra HD), 3D, Deep Color, and Full HD 1080p 36-bit color depth. Audio signals: Lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD). Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz over CAT5/6.The HBT-C6POE-R includes one (1) unit: Receiving unit (Rx) HBT-C6POE-R with one (1) UTP output port which allows the user to extend video and audio up to 100m (330ft). The HBT-C6POE-R also allows bi- directional IR control of the source connected to the unit from the users IR remote control at the monitor side.The bonus features with this device it can support PoE (Power over the CATx cable to the RX) also Internet (100Mbps Ethernet service when connected to a Router). These features has been added to this unit to give the installer and user a complete solution with the new trends in online streaming, network connected devices and new demand in Smart TV, Ultra HD monitors and content.

The award winning Vision blue head and tripod systems deliver effortless support, freeing you to focus on your creative edge. With the widest payload capacity in each class, the perfect balance and drag control can be adapted for cameras from just 1.5kg with the new blueBridge, up to 12kg/26.5lb, for heavier combinations.Whichever system you choose, each pan and tilt head is effortless to use, providing perfect balance and precisely adjustable drag to exactly match your style.Based upon the technology used by broadcasters around the globe, Vinten Vision blue systems offer outstanding quality of camera support. Each Vision blue head is the only product in its class to offer infinitely adjustable Perfect Balance and Lubricated Friction (LF) drag technology, freeing you to focus on getting the best from your camera.The Vinten VB3-AP2F Vision blue3 Video Tripod System consists of a 2-stage, 75mm bowl Pozi-loc tripod, Vision blue3 video head, a floor spreader, and a soft case. The system is designed to support loads from 6.6 to 14.6 lb and features a LF (Lubricated Friction) pan and tilt drag system as well as a continuously adjustable counter balance. The Pozi-Loc Tripod features an aluminum construction and Pozi-Loc leg clamps, and it has a working height range of 22 to 66". A floor spreader is included that provides increased leg rigidity when shooting in studios and other locations with a flat floor surface. The included carrying case protects the tripod during storage and transport.

The BE71-F is the same powerful unit as the BE71 only with the added benefit of an optical output. The BE71-F sports a Singlemode Simplex (1 channel) SC connector.(Multi-mode compatible with attenuation at transmit end) The BrightEye 71F is a dual rate eight channel analog audio embedder or disembedder for 1.5Gb/s high definition video signals or for 270Mb/s standard definition signals. The analog audio ports automatically configure as inputs or outputs depending if the module is configured as mux or demux.When configured as a multiplexer, the BrightEye 71 has one serial digital video input and eight analog audio inputs. The audio streams are embedded into the video stream. The output of the module is a digital stream that contains the original video signal and four analog audio pairs.When configured as a demultiplexer, audio signals present in the incoming video signal are extracted and delivered as analog audio.The BrightEye 71F includes an eight channel audio mixer with channel swap and shuffle capability that allows you to completely re-arrange and re-mix audio channels. It provides precise control over audio level, with up to 12 dB of gain to compensate for low level sources. All audio processing is performed at full 24 bit resolution by a digital signal processor (DSP). Delay is adjustable up to one second. Power supply is included.

The Beyerdynamic CA Q 31 Antenna cable for Quinta, length 10m (33 ft.).

The Beyerdynamic TGV 56 W microphone head provides many opportunities for singing on stage and in rehearsal rooms. With the typical fine resolution of condenser microphones it is suitable for the most diverse requirements and provides room for different types of vocal and musical style. The discreet treble boost ensures a very transparent signal and the complex decoupling of the capsule minimizes handling noise.

The Beyerdynamic active WA-ATDA directional antenna is a receiving antenna for indoor or outdoor use. It has a logarithmic periodic dipole field and provides a better reception and suppression of interfering RF signals from the rear than omnidirectional half-wave antennas due to its lobe polar pattern.The antenna operates in the UHF range between 470 and 1,000 MHz and can be used with all wireless system with an antenna voltage of 8 to 9 V such as the beyerdynamic series TG 1000. It is connected via a BNC socket.The WA-ATDA can be operated as a passive or active antenna with a selectable gain of 6 or 12 dB. The selectable gain can compensate cable loss.The external voltage supply of 8-9 V DC is achieved via a coaxial cable connected to a receiver or antenna splitter. An LED displays the correct supply voltage. If the gain has been set to "passive" the antenna operates in the passive mode, for which a supply voltage is required as well.The antenna can be mounted on stands (3/8" or 5/8"), installed hanging from a ceiling or attached to a wall by using the integrated swiveling adapter.For diversity operation two WA-ATDA antennas are required.

The Beyerdynamic passive WA-ZAPD1 two-way combiner is used for multi-antenna systems in conjunction with wireless systems such as the beyerdynamic TG 1000. It can directly be connected to the TG 1000 receiver. In order to avoid unwanted dropouts inside the combiner, it is necessary to make sure that both antenna signals have the same field strength.As the antenna phantom powering of 8-9 V is routed from the TG 1000 receiver through the WA-ZAPD1 combiner, the WA-ATDA antenna or the WA-AMP antenna amplifier can be operated with the combiner. The antenna or antenna amplifier is connected via BNC sockets.

The Beyerdynamic Quinta Classis RM 30 or Classis RM 31 Q is a new desktop microphone for round table discussions, podiums, tele/video conferencing, announcements and lecterns. The Revoluto technology with five integrated microphone capsules provides a so-called corridor characteristic which ensures a wide range of good voice quality. Within this range up to two speakers can move freely, i.e. they can stand up or sit down, move their head and move towards or away from the microphone. The microphone features the innovative Scudio technology, making it absolutely insensitive to wireless communication devices such as mobile phones.The microphone is available in four versions. The Classis RM 30 and Classis RM 31 SP or RC versions can be installed into tabletops when using shock-mounted holders. The Classis RM 31 Q version is used with the microphone units of the Quinta and Orbis conference systems.With the SP variants you can select via the programmable button between the operating modes ON/OFF, Push-To-Talk and Push-ToMute. The microphone button can also be disabled. The frequency response can be set with a separate switch in two stages: Linear or with low-cut filter to suppress low-frequency interference. The illuminated ring indicating the microphone status can be deactivated.In addition to the features of the SP variants, the RC variant provides the option of external control. Furthermore, when operating the microphone button, an external device can be controlled via the control output.The LED ring of the Classis RM 31 variants displays the ready-totalk status of the microphone.

The BK-2AUD has a lightweight, padded rigid frame and a comfortable strap system with thick padding and breathable mesh lining to maximize air-flow.The case has a padded pocket that will hold a 17" laptop computer and 2 accessory pockets perfect for spare batteries and cables. It includes a 6" x 9" padded accessory pouch, a set of 6" Piggin' Strings, and a strong rigid divder for extra support of heavy audio equipment. The backpack has extra foam padding and non-slip material on the shoulder, removable waist straps, and padded side support straps. A LI-GLW illumination strip light pocket is included.

The BK-3BLC Modular Backpack - Local Version (Black) is designed for lightweight local use when carrying a camcorder with accessories. It includes a BK-P2M removable front double pocket and ergonomic backpack straps. Features include a protective rigid inner frame and zipper covers for wear spots on corners. There are modular pocket options available such as: a BK-LPM modular option for a laptop computer; a BK-RBM removable belt pouch made to hold accessories such as filters, matte boxes, or back-up batteries; and a BK-TQM tripod quiver module.The BK-3BLC modular backpack straps adjust to carry the pack horizontally or vertically in order to best adapt to equipment loads. It also has a lightweight rigid frame for maximum protection of the case contents.Equipment Covered: Canon XA10, Canon XA20, Canon XA25, Canon XF100, Canon XF105, Canon XF200, Canon XF205 JVC GY-HM150,JVC GY-HM600, JVC GY-HM650,JVC GY-HMQ10,JVC GY-HMZ1U Panasonic AG-3DA1,Panasonic AG-AC130,Panasonic AG-AC160,Panasonic AG-AC90,Panasonic AG-HMC150, Panasonic AG-HMC40 Panasonic AG-HPX170,Panasonic AG-HPX171, Panasonic AG-HPX250, Panasonic AG-HPX255, Panasonic AG-HVX200, Panasonic HDC-Z10000 Sony HDR-AX2000, Sony HDR-FX7, Sony HVR-A1U, Sony HVR-Z5U, Sony HVR-Z7U, Sony HXR-NX3/1, Sony HXR-NX30 Sony HXR-NX5,Sony HXR-NX70, Sony PMW-100, Sony PMW-160, Sony PMW-EX1, Sony PMW200, Sony PXW-X70

The blue CBA-PXWX500 Camera Body Armor is a jacket designed to fit the Sony PXW-X500 Camcorder. It is made of a soft-feel, water and abrasion-resistant fabric that protects your camera from bumps, hits, and scratches, also reducing the risk of damage due to precipitation, dust, and other harsh conditions. The flaps and vinyl windows keep dirt and moisture out, but allow quick visual checks on important meters, indicator lights, and switches. The back end of the jacket is expandable to accommodate various sizes of batteries and wireless microphone combinations. The Camera Body Armor includes a reversible rain top cover; one side of it is white to reflect light and heat in hot, dry, sunny situations, while the other one is black to absorb the sun's warmth under cold conditions. The Camera Body Armor is fastened onto the camera using touch fasteners and web cinches.

The camBag Cinema - Black is a spacious, soft padded and lightweight camera bag that fits a professional camcorder up to 52 cm/ 20.5 inch, including a wide range of accessories. The camBag is made of water resistant 1000 denier Cordura nylon with reinforced sides. This creates a solid frame that protects your gear in the most extreme conditions. To accommodate all necessary accessories, this bag has various pockets and compartments on both the inside and the outside. Suede padded hand grips and a removable shoulder strap allow you to carry the bag comfortably in any situation. This camBag also allows you to customize the interior with the 4 removable dividers which are supplied with the bag. Due to the design of this bag it?s possible to store or transport your camera with the accessories attached.

The Camera BodyArmor EX1 Camera Case fits the Sony PMW-EX1 beautifully and includes a simple RAIN/DUST cover in a convenient slip pocket. All the important functions are accessible through the padded Armor Body. Use it on or off the tripod. Check out the promotional video to learn more and to see our Camera BodyArmor in action.The Camera BodyArmor Camera Case might be thought of as a Shoulder Case with a very soft feel to it and a reversible Rain/Dust Top. The soft feel against the face is appreciated by the camera operator. The reversible top is white (reflective) on one side for hot, dry, sunny situations while the black side is useful to absorb the sun`s warmth under cold conditions. The Camera BodyArmor has the same attention to details the traditional Shoulder Case enjoyed by camera owners for the past 20 years.

The camRade wetSuit ARRI ALEXA Mini is a rain cover that protects your ARRI ALEXA Mini camera against the elements. It is made of water-resistant fabric with a soft lining and minimalizes unwanted sound effects during operation.It also reduces the chance of the camera overheating by allowing hot air to escape via vents and openings.Due to many smart openings the DoP can use the cover around the desired configuration of the camera.The wetSuit is supplied with clear protection covers for a normal and a long lens, making sure that any lens you might use will be well protected. When the lens is shorter than the cover this can be folded back to the correct size. The viewfinder monitor is completely closed off by the fabric and vinyl window, so no water will come into the suit during use. The vinyl window on the viewfinder cover can be opened to use the LCD screen.The cover has clear vinyl windows which can be opened and closed with hook and loop fasteners, for maximum visibility when adjusting the menu, audio input select level and other controls.This item will be delivered to you in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use.

The camRade wetSuit EFP Large is a very strong rain cover designed for a wide range of outside broadcasting cameras using a large lens adaptor, viewfinder and viewfinder sun hood. The discrete grey fabric with soft lining minimalizes unwanted sound effects caused by wind and rain during operation and helps the camera not to stand out in a crowd.The cover is perfect for use during both indoor and outdoor events such as sports, music, etc. The monitor and controls are protected by vinyl windows for easy view and the hand controls are fully accessible. The one-piece wetsuit closes with only hook and loop fasteners which helps to get the cover over the set-up very quickly and ensures a good seal with the camera.This item is supplied in a water-resistant pouch with zipper, which you can use for storage and transportation of the cover when not in active use.This cover is available in Black and Grey.

The camRade skypanelBag S30C is a custom-made bag for the ARRI SkyPanel S30C LED softlight. It offers room for 1 panel including 1 yoke. This bag is made of 1000 denier Cordura® nylon, has firm plastic reinforced sides, with foam padded interior, and finished with a soft velour lining and YKK® zippers.You can remove the supplied dividers with hook and loop fasteners. This way you can adapt the interior of the bag to your needs. Under the top lid a transparent vinyl pocket is located where you can store documents and cables. The bag offers enough space to also carry a number of smaller accessories to make your shoot run smoothly.

The camRade wetSuit HC-X1000 is a black soft flexible waterproof rain cover that protects your camera against the elements. It also covers the viewfinder, microphone and other accessories. The rain cover is designed specifically for the Panasonic HC-X1000 camcorder. The near silent fabric minimalizes unwanted sound effects caused by wind and rain and reduces the chance of the camera overheating by allowing hot air to escape via the breathing material which the cover is made of. The wetSuit has clear vinyl windows for visibility when adjusting the menu, audio input select level or other controls. The viewfinder monitor is completely closed off by the fabric and vinyl window, so no water will come into the suit during use. This item will be delivered to you in a waterproof pouch with zipper, which you can use for storing and transportation of the cover when not in active use.